Constanza Ahumada

Dr. Constanza Ahumada

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 August 2015 in IEEE Transactions on Smart Grid
Verified
Journal Article
Closed access
CAConstanza Ahumada
Constanza Ahumada
RCRoberto Cardenas
Roberto Cardenas
Doris SaezDoris Saez
Doris Saez
Josep M. GuerreroJosep M. Guerrero
Josep M. Guerrero
One of the well-known methods to share active and reactive power in microgrids (MGs) is droop control. A disadvantage of this method is that in steady state the frequency of the MG deviates from the nominal value and has to be restored using a secondary control system (SCS). The signal obtained at the output of the SCS is transmitted using a communication channel to the generation sources in the MG, correcting the frequency. However, communication channels are prone to time delays, which should be considered in the design of the SCS; otherwise, the operation of the MG could be compromised. In this paper, two new SCSs control schemes are discussed to deal with this issue: (1) a model predictive controller (MPC); and (2) a Smith predictor-based controller. The performance of both control methodologies are compared with that obtained using a conventional proportional integral-based SCS using simulation work. Stability analysis based on small signal models and participation factors is also realized. It is concluded that in terms of robustness, the MPC has better performance.

2 July 2021 in IEEE Access
Verified
Journal Article
Open access
CAConstanza Ahumada
Constanza Ahumada
Patrick WheelerPatrick Wheeler
Patrick Wheeler
This paper studies the excitation of torsional vibrations by electromechanical interaction after the connection of electrical loads. Electrical generation and power system in aircraft are becoming of key importance, especially considering the current roadmap for aerospace systems’ electrification. However, since the drivetrain which links electrical generators to the main engine is relatively flexible in most aircraft structures, torsional vibrations can be excited by the sudden connection or disconnection of electrical loads, thus increasing the drivetrain’s fatigue and reducing its reliability and lifetime. Because of the increased amounts of intermittent electrical loads on aircraft systems, which excite torsional vibrations through electromechanical interactions, the electrical load connections are investigated in this paper. Specifically, a method for reducing torsional vibrations in aircraft drivetrains is proposed to extend their lifespan. This method is applied directly to the load being connected and it proposes the connection of the electrical loads following a pulsating pattern, for which the pulse connection time is determined as a function of the drivetrain vibration modes. Simulations results show that the proposed method provides a significant reduction in the drivetrain shaft torsional vibrations. Experimental results validate the simulation data showing the benefits this method can provide in drivetrain reliability, weight reduction and cost.

8 June 2021 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
CAConstanza Ahumada
Constanza Ahumada
Patrick WheelerPatrick Wheeler
Patrick Wheeler
Aircraft drivetrains connect the engine to the electrical power system. In most cases, the drivetrains are relatively flexible and have vibration modes with values below 100 Hz to reduce weight and size. Therefore, electrical loads’ connection and disconnection may excite torsional vibrations in the machine's shaft, reducing the drivetrains’ lifespan. This interaction is known as electromechanical interaction. This issue can be mitigated using an input-shaping strategy, which reduces the excitation of torsional vibrations by connecting the electrical loads following a pattern, dependent on the drivetrain's natural frequencies. However, since this method is based on the knowledge of the vibration modes attributes, it can be susceptible to parameter's uncertainty. In this article, a pulsating input shaping method's robustness is assessed, analyzing simulation and experimental results. The effect of the inductances is analyzed, and a strategy to reduce its effect is proposed. Furthermore, the effect of uncertainty in the mechanical parameters is evaluated, and theoretical analysis is carried out to establish safe operating limits. The theoretical analysis is experimentally validated.

1 October 2024 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
CAConstanza Ahumada
Constanza Ahumada
LTLuca Tarisciotti
Luca Tarisciotti
DSDiego Sepúlveda
Diego Sepúlveda
Doris SaezDoris Saez
Doris Saez
In recent years, more electric ships are gaining importance for their capability of reducing CO $_{2}$ emissions. In these vessels, the use of electric propulsion, in which the electrical energy is provided through an electric grid, allows 35% of fuel savings. However, to reduce the weight of the propulsion system, the shaft connections in the overall system are often very flexible, allowing vibrations to be excited. Torsional vibrations can be excited by sea perturbations such as ventilation, damaging the propeller or reducing its life. This paper studies the excitation of torsional vibrations and proposes a Model Predictive Control (MPC) strategy to reduce them. For this, a simplified model of marine vessel propellers is considered and the MPC strategy is applied and analysed for different sources of vibrations. The proposed strategy is also analysed under different operation points and its robustness to parameter uncertainty is assessed. The technique is validated through simulations and hardware-in-the-loop experimental tests. The obtained results show that the proposed MPC reduces the torsional vibrations while maintaining the same speed control characteristics.

7 March 2024 in Sensors
Verified
Journal Article
Open access
PDF file
DMDiego Muxica
Diego Muxica
SRSebastian Rivera
Sebastian Rivera
MOMarcos E. Orchard
Marcos E. Orchard
CAConstanza Ahumada
Constanza Ahumada
FJFrancisco Jaramillo
Francisco Jaramillo
Rodrigo AstrozaRodrigo Astroza
Rodrigo Astroza
This paper presents the design, implementation, and validation of an on-blade sensor system for remote vibration measurement for low-capacity wind turbines. The autonomous sensor system was deployed on three wind turbines, with one of them operating in harsh weather conditions in the far south of Chile. The system recorded the acceleration response of the blades in the flapwise and edgewise directions, data that could be used for extracting the dynamic characteristics of the blades, information useful for damage diagnosis and prognosis. The proposed sensor system demonstrated reliable data acquisition and transmission from wind turbines in remote locations, proving the ability to create a fully autonomous system capable of recording data for monitoring and evaluating the state of health of wind turbine blades for extended periods without human intervention. The data collected by the sensor system presented in this study can serve as a foundation for developing vibration-based strategies for real-time structural health monitoring.

11 June 2019 in IET Electric Power Applications
Verified
Journal Article
Open access
PDF file
CAConstanza Ahumada
Constanza Ahumada
PWPat Wheeler
Pat Wheeler
Rotational systems such as aircraft engine drivetrains are subject to vibrations that can damage shafts. Torsional vibrations in drivetrains can be excited by the connection of loads to the generator due to electromechanical interaction. This problem is particularly relevant in new aircraft because the drivetrain is flexible and the electrical power system (EPS) load is high. To extend the lifespan of the aircraft engine, the electromechanical interaction must be considered. Since real‐time constants of the electrical and mechanical systems have very different magnitudes, the simulation time can be high. Furthermore, highly detailed models of the electrical system have unnecessary complexity for the study of electromechanical interactions. For these reasons, modelling using reduced order systems is fundamental. Past studies of electromechanical interaction in aircraft engines developed models that allow the analysis of the torsional vibration, but these are difficult to implement. In this study, a reduced order electromechanical interaction system for aircraft applications is proposed and validated using experimental results. The proposed system uses a reduced drivetrain, simplified EPS, and sensorless measurement of the vibrations. The excitation of torsional vibrations obtained is compared with past studies to prove that the reduced order system is valid for studying the electromechanical interactions.