8 August 2014 in Heat Transfer Engineering
Two different heat transfer models for predicting the transient heat transfer characteristics of the slabs in a walking beam type reheat furnace are compared in this work. The prediction of heat flux on the slab surface and the temperature distribution inside the slab have been determined by considering thermal radiation in the furnace chamber and transient heat conduction in the slab. Both models have been compared for their accuracy and computational time. The furnace is modeled as an enclosure with a radiatively participating medium. In the first model, the three-dimensional (3D) transient heat conduction equation with a radiative heat flux boundary condition is solved using an in-house code. The radiative heat flux incident on the slab surface required in the boundary condition of the conduction code is calculated using the commercial software FLUENT. The second model uses entirely FLUENT along with a user-defined function, which has been developed to account for the movement of slabs. The results obtained from both models have a maximum temperature difference of 2.25%, whereas the computational time for the first model is 3 h and that for the second model is approximately 100 h.
8 November 2016 in The Journal of the Textile Institute
In an attempt to understand the influence of basic structural parameters of fabrics on thermal protection and comfort, present study mainly focuses on analyzing effect of fabric weaving pattern and fabric weight. Fabric samples of three basic weaving patterns (plain, twill, and satin) and three different weights were prepared. Air permeability of the developed fabric samples was measured. Thermal protective performance of fabrics against radiant heat and flame exposures of two different intensities were measured. Spectral transmission behavior of fabrics was also studied. It was observed that for same fabric weight, protective performance and air permeability of satin woven fabrics were better as compared to the fabrics of other patterns. Protective performance increased and air permeability decreased as fabric weight increased for each type of woven structure included in this study. A new structural parameter is proposed which primarily influences the protective performance of fabrics exposed to either radiant heat, flame, or combined convective/radiant heat exposure.
9 August 2012 in Heat and Mass Transfer
11 November 2008 in Numerical Heat Transfer, Part A: Applications
Numerical simulations for fluid flow and heat transfer in triangular ducts are carried out. Flow is considered to be laminar, hydrodynamically, and thermally developing. Heat transfer by both forced and natural convection is taken into account. Simulations are carried out for constant wall temperature cases which are at a higher temperature than the inlet temperature of the fluid. The effect of Rayleigh number on bulk mean temperature and Nusselt number is studied. Isotherm and secondary velocity profile formed because of natural convection is shown at different locations with varying Rayleigh number. The effect of the apex angle of the triangular duct on Nusselt number and bulk mean temperature is studied. Results are compared with the cases of mixed convective heat transfer in a square duct.
14 July 2007 in Heat and Mass Transfer
25 February 2019 in Journal of Materials Processing Technology