Micro- and nano-structures of ZnO were synthesized by the vapor–solid method at 600, 700, and 800 °C in atmospheres of Ar and air, at atmospheric pressure. The structural characterization XRD shows that the nano-structures synthesized in air atmosphere at 600 °C, while diffraction peaks were found due to Zn because the presence of metallic Zn remains on the surface of the pellet. SEM images show that the morphologies range from nano-wires to micro-tubes. When cathodoluminescence is measured in micro-tubes, there is a shift of the near-band edge of the ZnO toward red; this is due to structural defects in the ZnO network. This result is corroborated with panchromatic CL measurements, which exhibit a difference in brightness between the micro-tubes. Furthermore, EDS measurements show an atomic quantity ratio of Zn:O that differs from the stoichiometric composition in the micro-tubes. The photocatalytic activity of three types of structures—nano-wires, micro-tubes, and micro-rods under UV irradiation using methylene blue as a model pollutant—were evaluated. The best response was obtained for nanowires, not only because they have a larger surface area but also because of the present defects.
Microtubes and rods with nanopipes of transparent conductive oxides (TCO), such as SnO_2, TiO_2, ZnO and In_2O_3, have been fabricated following a vapor-solid method which avoids the use of catalyst or templates. The morphology of the as-grown tubular structures varies as a function of the precursor powder and the parameters employed during the thermal treatments carried out under a controlled argon flow. These materials have been also doped with different elements of technological interest (Cr, Er, Li, Zn, Sn). Energy Dispersive X-ray Spectroscopy (EDS) measurements show that the concentration of the dopants achieved by the vapor-solid method ranges from 0.5 to _3 at.%. Luminescence of the tubes has been analyzed, with special attention paid to the influence of the dopants on their optical properties. In this work, we summarize and discuss some of the processes involved not only in the anisotropic growth of these hollow micro and nanostructures, but also in their doping
26 November 2024 in Ciencia Latina Revista Científica Multidisciplinar
En este trabajo se presenta la instrumentación de un sistema de fabricación de semiconductores de ZnO mediante el proceso de termólisis mediada por poliol. Los semiconductores fabricados a partir del precursor Zn(CH3COO)2-2H2O se han sintetizado en diferentes concentraciones molares (0.001 M, 0.01 M, y 0.1 M), a bajas temperaturas y presión atmosférica. Las características estructurales y morfológicas de los semiconductores de ZnO se estudiaron mediante difracción de rayos X (DRX) y microscopía electrónica de barrido (SEM). La DRX ha confirmado la fabricación de los semiconductores de ZnO con alta calidad cristalina. No se detectaron otras fases cristalinas. Las micrografías SEM revelan que la morfología de las partículas cuasi esféricas no aglomeradas (compuestas de partículas de tamaño nanométrico) se ha controlado a partir de las partículas aglomeradas, cuando se ha utilizado la concentración de 0,001 M a 0,01 M, respectivamente. Cuando se ha utilizado la concentración más alta, no se produce agregación y sólo se obtienen partículas diminutas en el rango de tamaño nanométrico. Como resultado, la ruta de síntesis demuestra con éxito la fabricación de semiconductores en un solo paso, en un proceso de estrategia simple, siendo de bajo coste y escalable a nivel industrial.
16 February 2026 in International Journal of Combinatorial Optimization Problems and Informatics
In this paper, we present a new algorithm that combines Hu invariant moments, data preprocessing techniques, and fuzzy logic to analyze and classify signals obtained from the macro and micro head movements that a person makes. Firstly, we project different videos to elicit the disgust emotion in various participants. Following the stimulation, we recorded all the participants' reactions on video. The next step is to apply Hu moments to transform the different movements that the participant made to create a signal. This process yields polynomial regression and applies normalization methods to standardize the size and numerical scale of all signals. We implement a fuzzy inference system to classify the signals. The results presented by this algorithm show high performance in sorting movements to detect disgust emotion. Smart citations: https://scite.ai/reports/10.61467/2007.1558.2026.v17i2.1120Dimensions.Open Alex.