Explore full metrics on Scilit
(Calculated once Scilit publication data is synced: current year − year of first publication + 1)
<mml:math display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>TiO</mml:mtext></mml:mrow><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>TiO2 films from tetrakis(dimethylamido) titanium (TDMAT) or titanium tetraisopropoxide (TTIP) precursors was investigated. The growth kinetics, chemical composition, and crystallization behavior of the <mml:math display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>TiO</mml:mtext></mml:mrow><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>TiO2 films were compared for combinations of the two precursors with three different sources of oxygen [thermal ALD using <mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="normal">H</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub><mml:mi mathvariant="normal">O</mml:mi></mml:mrow></mml:math>H2O and plasma-enhanced ALD (PEALD) using <mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="normal">H</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub><mml:mi mathvariant="normal">O</mml:mi></mml:mrow></mml:math>H2O or <mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="normal">O</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>O2 plasma]. For TDMAT, the growth rate per cycle (GPC) decreased with increasing temperature; while for TTIP with either water plasma or <mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="normal">O</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>O2 plasma, a relatively constant growth rate per cycle was observed as a function of substrate temperature. It was found that the crystallization temperature of the <mml:math display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>TiO</mml:mtext></mml:mrow><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>TiO2 films depends both on film thickness and on the deposition conditions. A correlation was observed between the <mml:math display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>TiO</mml:mtext></mml:mrow><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>TiO2 crystallization temperature and the C impurity concentration in the film. The <mml:math display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>TiO</mml:mtext></mml:mrow><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>TiO2 films grown using a <mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="normal">H</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub><mml:mi mathvariant="normal">O</mml:mi></mml:mrow></mml:math>H2O plasma exhibit the lowest crystallization temperature and have no detectable C impurities. In situ X-ray diffraction measurements were used to test the diffusion barrier properties of the <mml:math display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>TiO</mml:mtext></mml:mrow><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>TiO2 layers and proved that all <mml:math display="inline"><mml:mrow><mml:msub><mml:mrow><mml:mtext>TiO</mml:mtext></mml:mrow><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>TiO2 films grown using either <mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="normal">H</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub><mml:mi mathvariant="normal">O</mml:mi></mml:mrow></mml:math>H2O or <mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="normal">O</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>O2 plasma are dense and continuous.