30 October 2020 in Engineering, Energy, Transport AIC
The article discusses the main provisions and the role of mechatronics in production in agriculture. A review of current and promising mechatronic systems for use in agriculture is carried out. It is noted that the use of scientific and technological advances in the field of mechatronics opens up new opportunities for solving multidisciplinary problems, and also makes a person dependent on technical means. The current state and world trends in the application and development of mechatronic systems in the field of agricultural production are investigated. The needs for the use of mechatronic systems and modules in the conditions of agricultural enterprises are analyzed and the problems associated with their implementation and use are identified. The purpose of creating such complexes is to achieve a combination of high productivity and at the same time flexibility of the technical and technological environment due to the possibility of its reconfiguration, which will ensure the competitiveness and high quality of products in world markets. In modern mechatronic systems, to ensure a high quality of implementation of complex and precise movements, it is necessary to apply intelligent control methods. To create intelligent systems, it is necessary to provide flexible interaction of components within the system and with the outside world. Current trends in the use of mechatronic systems and modules in agricultural production are determined. As the scope of application of mechatronic systems expands and international scientific and technical relations expand, it becomes more and more important to actively exchange new production and information technologies between their creators and users, between various groups of consumers and developers (research centers, enterprises of various forms of ownership, universities ). These forms of cooperation are implemented within the framework of international technology transfer. The development of mechatronics as an interdisciplinary scientific and technical field, in addition to obvious technical and technological difficulties, also raises a number of new organizational and economic problems.
23 December 2022 in Vibrations in engineering and technology
The modern unsatisfactory state of livestock in Ukraine depends largely on the lack of high -use feed, especially on legumes. In turn, the lack of such feed is associated with insufficient amounts of high -yielding seeds. All studies aimed at increasing the production of herbs are relevant and require a priority solution. The deficiency of high -performance seeds of legumes is explained by several reasons. These are the agrotechnical and physical and mechanical properties of both the seeds and the components of the crop mixture, the weather conditions under which is harvested, etc. To a large extent, the amount and quality of seeds depends on the conditions and results of harvesting the seeds. In this regard, the development of new means for drying the crop mixture of herbs and the study of the impact of their structural and technological parameters to improve the energy and qualitative indicators of the technological process of work of drying equipment is an important task. Analysis of the technologies of collection of legumes of legumes shows that almost all methods of harvesting require additional treatment of crop mass on the hospital. It is thanks to bringing the crop mixture to the corresponding condition, especially by its humidity, that it is possible to significantly reduce the field loss of seed crop. Analysis of agricultural dryers in terms of suitability for drying the crop mixture was carried out. For the implementation of the process of drying of this material, the most suitable are dryers with a fixed layer. After all, the use of most types of dryers is impossible due to the specific features of the material. The scheme of the laboratory installation for the experimental determination of structural and mode parameters of the drying process is proposed. The laboratory installation allows you to adequately simulate the process of drying the thick layer of crop mixture with the possibility of reversible supply of the drying agent.
18 December 2020 in Vibrations in engineering and technology
One of the advanced types of grinding equipment are vibrating mills, which provide high specific productivity at relatively low energy consumption, adjustable tone of grinding products. Vibration impact on the product significantly increases the shock-absorbing effect with the possibility of wide and separate variation of shock and abrasion factors. Significant speed of mechanical and heat and mass transfer processes, a high degree of homogeneity of the obtained products, the possibility of efficient fine grinding and dispersion of the product at relatively low energy consumption lead to the widespread use of vibratory grinding. The constructive scheme of the mill is developed, in which the flat vertical vibrating field provides lifting of a part of loading and by means of the transport-reloading device carries out its continuous adjustable movement from one grinding chamber to another, thereby circulating-spatial movement of the environment in which there is a grinding process. shock interaction of grinding bodies and material that is crushed. The priority direction of development of science and technologies at the modern level is the development, creation and implementation of new generation mechatronic systems. One of the most important rules for the construction of vibrating mills is the need to maximize the degree of their automation in order to increase productivity, improve the quality of grinding and reduce the cost of the process. Also in the article the structural model of the controlled vibromill with spatial-circulating loading movement which at change of weight of a working body in the course of separation and unloading of the crushed material from a grinding chamber constantly adapt to a resonant mode of work at the set technologically optimum parameters (productivity) and the minimum power consumption.
5 March 2020 in PRZEGLĄD ELEKTROTECHNICZNY
Wydawnictwo SIGMA-NOT wydaje czasopisma fachowe informuj?ce swoich czytelnik?w o najnowszych osi?gni?ciach naukowych i nowoczesnych rozwi?zaniach technicznych w Polsce i na ?wiecie, popularyzuje problemy techniczne oraz poszerza wiedz? i kultur? techniczn?.
25 August 2023 in Engineering, Energy, Transport AIC
Drying of mowed grass in the field during hay harvesting is accompanied by loss of not only moisture, but also nutrients by plants as a result of biochemical processes, vital activity of microorganisms, and leaching by precipitation. Moreover, the...
23 December 2022 in Engineering, Energy, Transport AIC
The key group of innovations from the standpoint of sustainable development are technological innovations, which are represented by innovations in technology or (innovation-process). They are the basis of meeting the growing needs of society, increasing production efficiency, changing models and generations of equipment and technological methods of production. Modern agriculture cannot be imagined without the use of IT technologies. Today, the robotization of agriculture is inevitable. Agriculture will benefit from the revolution in the field of information and communication technologies, which is happening in all areas: robotics, sensory perception, more intelligent decision support systems, data analytics, etc. For the geospatial industry, fieldwork robotics is a particularly important task. It is a huge operation to control robots - on wheels or in the air - using navigation systems and sensors, to store all data and integrate them into relevant applications. Technological renewal of the agrarian sector of the economy is usually based on the use of high-tech systems of management, monitoring, control, management and automation of production processes, with the use of highly integrated SMART systems and the involvement of artificial intelligence technologies. Taking into account the significant volumes of cargo processing, agricultural enterprises, in particular in warehouses, a promising direction and reserve for ensuring high labor productivity is the use of robotic manipulators, and research is devoted to increasing their functionality and maneuverability, including through the use of intelligent control systems and optimization of the structure of executive mechanisms. relevant and will have practical value. In the article substantiates the kinematic parameters and dynamic characteristics of the angular manipulator.