The main focus of this paper is to design and characteristics investigation of Novel Dual Stator Pseudo-Pole Five Phase Permanent Magnet Synchronous Generator (NDSPPFP-PMSG) for wind power application. The proposed generator has a dual stator and two sets of five phase windings which enhance its power density and fault tolerant capability. The novelty of this generator is based on the fact that eight magnetic poles are formed using only four poles of actual magnets on both the surfaces of the rotor. For the designing and optimal electromagnetic performance of the proposed generator, a Dynamic Magnetic Circuit Model (DMCM) is reported. To validate the results obtained from DMCM, Finite Element Method (FEM) has been opted owing to its high accuracy. For showing the performance superiority, the proposed generator is compared with two conventional generators namely, Dual Stator Embedded-Pole Five Phase (DSEPFP) and Single Stator Single Rotor Five Phase (SSSRFP) PMSG. To compare their performances, FEM results are considered. The electromagnetic performance namely, generated Electromotive Force(EMF), percentage(%) Total Harmonic Distortion(THD) of generated EMF, generated EMF vs speed, terminal voltage vs load current, electromagnetic torque developed on rotor vs time, %ripple content in the torque, and %efficiency vs load current are investigated for all the three generators. From these investigations, it is found that the power density (power to weight ratio) of the proposed generator is maximum.
Fast charging of lithium-ion battery (LIB) packs at low temperatures can have several effects on the performance and overall health of the battery. Repetitive fast charging at low temperatures accelerates internal resistance growth, leading to inefficient charging. Slow and inefficient chemical reactions at low temperatures result in slower charging rates and increased heat generation. Furthermore, repeated fast charging at subzero temperatures accelerates degradation processes due to increased wear on the battery, significantly reducing the cycle life of the battery. This research paper presents a series of experimental studies conducted on a 21700 Lithium-Nickel-Manganese-Cobalt-Oxide (NMC) LIB cell to investigate the temperature gradient and its impact on battery performance at a wide range of ambient temperatures (-5°C to 25°C) and charging rate (1C to 2 C). The findings highlight the highest rate of change of surface temperature and differential temperature (15°C) with a charging rate of 2 C at ambient temperature of -5°C. Moreover, a reduction in battery discharge performance is observed during low-temperature charging compared to charging at 25°C with the same charging rate. These findings are crucial for the development of health-conscious fast charging algorithms, improved thermal management techniques, and the establishment of a thermal safety framework.
This paper deals the design and performance evaluation of a dual stator non-magnetic rotor six-phase permanent magnet synchronous generator (DSNMRSP-PMSG) for marine power application. To extract the marine power, it required a generator which have advantages like high power density, more robust and high fault tolerant capability. Due to the dual stator, non-magnetic light weight rotor and six-phase windings in both the stators the proposed generator is more suitable for above application. To design and analysis of proposed generator, finite element method (FEM) is opted for this purpose. For the FEM analysis magnetostatics and the transient mode of analysis are considered for the optimal design. For performance assessment, the transient mode of analysis is chosen. Using these modes of analysis, the evaluation of electromagnetic output such as generated electromotive force (EMF), percentage (%) THD, generated voltage vs speed, electromagnetic torque, % torque ripple and terminal voltage vs load current characteristics for generator are investigated.
1 December 2022 in IET Electrical Systems in Transportation
The motive of this study is to analyse the characteristics of a novel dual‐stator embedded‐pole six‐phase permanent magnet synchronous motor for the application of electric vehicles. A comparative analysis of two separate motor topologies, namely, dual stator embedded‐pole six‐phase permanent magnet synchronous motor and single stator single rotor surface‐mounted permanent magnet synchronous motor, is accomplished to illustrate the performance superiority of the proposed motor. Furthermore, for optimal designing of the proposed motor, a design methodology has also been presented. For the above application, the motor should retain high torque density (HTD) and high reliability. In this regard, a novel H‐Shaped flux barrier is introduced in the rotor portion, which fulfils the requirement of HTD. Moreover, the availability of two sets of the stator winding enhances the performance efficiency and ensures the proposed motor's more significant fault‐tolerating ability of the motor. For performance evaluation, the Finite Element Method analysis is chosen, as it gives appropriate and precise results. From the above analysis, it is concluded that the HTD and the proposed motor's dynamic performance are better than the above‐mentioned conventional motor.
13 September 2020 in Electric Power Components and Systems
This paper describes the characteristic investigation of the Novel Dual-stator V-Shape Magnetic Pole Six-Phase Permanent Magnet Synchronous Generator (NDSVSMPSP-PMSG) for wind power application. The proposed generator has V-shaped embedded magnetic pole in the rotor and six-phase winding in both the stator. The proposed generator has high-power density and high efficiency. For emphasizing the significance of the proposed generator, the characteristics of the NDSVSMPSP generator are analyzed and compared to one of the traditional generators, i.e., the Dual-stator Surface Mounted Six-Phase Permanent Magnet Synchronous Generator (DSSMSP-PMSG). For the design and characteristic investigation of both the generator, Finite Element Method (FEM) is chosen because of its high accuracy. Two modes of FEM analysis are considered, namely magneto-statics and transients. The magneto static analysis is used for the study of flux line and flux density distribution, while the transient analysis is considered for the generator’s characteristic investigation. The performance characteristics such as generated Electromotive Force (EMF) for both inner and outer stator, Percentage Total Harmonic Distortion (THD) of developed voltage, Developed EMF vs rpm, terminal voltage vs. current, developed rotor torque vs time, percent (%) ripple content in torque, and percent efficiency vs current for both generators are investigated. As a result, it can be stated that the power density and reliability of the proposed generator is higher than that of the traditional generator.
24 February 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The operational efficiency and widespread adoption of electric aircraft are highly dependent on their energy storage systems. Fast charging is essential for reducing downtime and improving turnaround times, but it can negatively impact battery health due to increased temperatures and accelerated chemical degradation. This issue becomes more pronounced under subzero conditions, where reduced chemical reaction rates increase internal impedance, leading to a greater rise in battery temperature and faster degradation. This article proposes a closed-loop Multistage-Constant-Current, Temperature-Controlled (MCC-TC) fast charging strategy designed to preserve the health of aviation-grade batteries. MCC-TC algorithm modulates charging current by incorporating real-time battery temperature feedback. The experimental validation shows that the MCC-TC algorithm significantly reduces temperature rise (ΔT) and the rate of temperature rise (ΔT/Δt) compared to the conventional Constant-Current Constant-Voltage (CC-CV) method. At -5°C and 30°C, the MCC-TC algorithm achieved reductions in ΔT and ΔT/Δt of 47.68% and 65.35%, and 49.74% and 38.96%, respectively. These results highlight the potential of the algorithm to enhance battery health and improves the efficiency of the charging process.