Erdem Çiftçi

Dr. Erdem Çiftçi

Energy Systems Engineering, Gazi University, Ankara, Turkey (Türkiye)
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 September 2023 in Applied Thermal Engineering
Verified
Journal Article
Closed access
CYCoşkun Yüksel
Coşkun Yüksel
MÖMurat Öztürk
Murat Öztürk
Erdem ÇiftçiErdem Çiftçi
Erdem Çiftçi

1 September 2021 in Solar Energy
Verified
Journal Article
Closed access
FAFaraz Afshari
Faraz Afshari
ATAzim Doğuş Tuncer
Azim Doğuş Tuncer
ASAdnan Sözen
Adnan Sözen
Erdem ÇiftçiErdem Çiftçi
Erdem Çiftçi
AKAtaollah Khanlari
Ataollah Khanlari

12 February 2018 in Experimental Heat Transfer
Verified
Journal Article
Closed access
ASAdnan Sözen
Adnan Sözen
MGMetin Gürü
Metin Gürü
TMTayfun Menlik
Tayfun Menlik
UKUğur Karakaya
Uğur Karakaya
Erdem ÇiftçiErdem Çiftçi
Erdem Çiftçi
This study investigates how TiO2/deionized water nanofluids affect the thermal performance of a two-phase closed thermosiphon (TPCT) at various states of operation, according to the surfactant types. A straight copper tube with an inner diameter of 13 mm, outer diameter of 15 mm, and length of 1 m was used as the TPCT, i.e., heat pipe. The nanofluid utilizing in experiments was prepared by mixing the TiO2 nano-particles at the rate of 1.3% and a surfactant at the rate of 0.5% with deionized water. The surfactants used for lowering the surface tension give rise to prevent the flocculation in nanofluids. In order to see the influences of the surfactants on the nanofluid properties, two types surfactants, Triton X-100 and sodium dodecyl benzene sulfonate (SDBS), were selected as nonionic and ionic surfactants and used in this study. The nanofluid was charged with in the ratio of 33.3% (equals to 44.2 ml) of the volume of the TPCT. To be able to make experimental comparisons, three different working fluids prepared under the same conditions in the same heat pipe were tested at three different heating powers (200, 300, and 400W) and three different coolant water flow rates (5, 7.5, and 10 g/s). The experiments were conducted for both TiO2 and Triton X 100–deionized water nanofluid and TiO2 and SDBS–deionized water nanofluid. The findings obtained from the tests were also compared to each other for showing off to what extent a surfactant affects the nanofluid properties. The maximum improvement in the thermal resistance was achieved by 43.26% in the experiment realized at 200 W input power and 7.5 g/s cooling water mass flow rate, in which the working fluid is TiO2 and SDBS–deionized water nanofluid.


7 April 2020 in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
Verified
Journal Article
Closed access
PDF file
DADuygu Yilmaz Aydin
Duygu Yilmaz Aydin
MGMetin Gürü
Metin Gürü
ASAdnan Sözen
Adnan Sözen
Erdem ÇiftçiErdem Çiftçi
Erdem Çiftçi
Most recently, an ascending tendency in nanoparticles containing working fluid utilization has been observed in such thermal systems as double pipe heat exchangers and thermosiphons in so far as its advantages upon the performance of such systems. In order to investigate how the type of the base fluid affects the nanofluid’s properties used for thermal applications, an experimental test rig was setup and two different nanofluid each of which involves different base fluid, but same nanoparticles and surface active agent were tested. During the nanofluid preparation process, bauxite nanoparticles as nanoparticle material and sodium dodecyl benzene sulfonate as surface active agents were used in volume fractions of 2% and 0.5%, respectively. As the base fluid type, ethylene glycol and deionized water were utilized. The tests were conducted under diverse working conditions and vacuum pressure. Distribution of temperature ahead the heat pipe wall, efficiency and heat pipe’s thermal resistance was experimentally investigated. It was observed from the experiments that each nanofluid improved the heat pipe performance significantly; however, deionized water/bauxite nanofluid gave the best results in terms of heat pipe’s thermal performance. For each nanofluid, the maximum increment in efficiency was observed under 200 W heating power and 10 g/s cooling water mass flow rate conditions, and improvement rates were 29.5% and 13.3% for ethylene glycol-based and deionized water-based nanofluids, respectively. At least 20% of decline in thermal resistance of the heat pipe was also recorded, when nanofluid was employed as working fluid.