Electrical machines find their place in every field, such as industrial, transportation, home, and commercial sectors. The suitability of the electrical machine for the area in which it will be used is important in terms of energy efficiency. The selection of the motor to be used for variable speed applications such as electric vehicles is also very important. Torque and power are the determining factors in the required speed/torque or speed/power combination for electric vehicles. For this reason, the efficiency map of the motor to be used in electric vehicles should be known in detail. In this study, due to its advantages such as its lighter structure, absence of magnet, and rotor winding loss, among others, the Axial Flux Synchronous Reluctance Motor (AF-SynRM) was preferred, and it was aimed at creating an efficiency map. The motor parameters for the determined speed/torque combinations were first obtained with FEM. Then, the FEM results were experimentally verified. In order to make the obtained results more meaningful, the experimental results were compared with radial flux motors with the same output power. In addition, using FEM, von Mises stress analysis and displacement analysis were performed on the motor shaft under overload conditions to observe the mechanical effects on the moving parts of the AF-SynRM. Furthermore, mechanical load analysis on the bearings was also performed. The results show that AF-SynRM can be preferred as an alternative to other motor types, especially for applications requiring variable speed, such as electric vehicles. The study has created the efficiency map of the AF-SynRM topology for the first time.
17 March 2021 in International Transactions on Electrical Energy Systems
In this study, the Axial Flux Synchronous Reluctance Motor (AF-SynRM) with multiple barriers in its rotor is designed and it is aimed to compare the performance with the Axial Flux Induction Motor (AF-IM) with the same stator structure and dimensions. For an equal comparison, the motor dimensions and stator structure are chosen the same, only the rotor is changed. In the preliminary study of the designs, machine dimensions are calculated analytically and modeled with the 3D Finite Element Method (FEM). To optimize the saliency ratio, which is the most important factor affecting AF-SynRM performance, Genetic Algorithm (GA) based optimization is performed and the rotor geometry is changed. Thus, a suitable model is created for comparison. Torque, efficiency, input power, power factor, total loses and torque per amper parameters are analyzed. With the proposed comparison method, AF-SynRM obtains higher efficiency, power, torque per ampere and lower losses than AF-IM at the same power rating (2.2 kW). The AF-SynRM rotor will be a good alternative in applications where high efficiency and torque are required, with low cost-maintenance costs due to the absence of a squirrel cage and its structure without magnet.
18 September 2025 in Journal of Electrical Engineering & Technology
Accurate measurement and uncertainty management are essential for reliable monitoring of industrial photovoltaic (PV) systems operating under heterogeneous sensing conditions. This study proposes a novel edge-based measurement framework that integrates physics-constrained multi-sensor fusion, an online uncertainty propagation graph, and uncertainty-aware Kalman filtering to ensure physically consistent and reliable PV measurements. Unlike conventional approaches that treat uncertainty as a static or post-processing parameter, the proposed method explicitly embeds physical PV relationships into the fusion process while dynamically modeling uncertainty propagation across the entire measurement chain. The framework is implemented on a Jetson Orin Nano edge platform, supported by ESP32-based acquisition nodes and MQTT communication via a Raspberry Pi local broker. Real measurement data collected from industrial PV installations in a real-world industrial zone in Türkiye are used for validation under realistic operating conditions. Experimental results demonstrate that the proposed approach significantly enhances measurement reliability, reducing RMSE from 2.43 V to 1.12 V (53.9% improvement) and variance from 6.12 V² to 2.48 V² (59.5% reduction). The system maintains real-time performance with an average latency of 32 ms at a 50 Hz sampling rate. The key novelty lies in transforming the edge device into an intelligent measurement instrument by jointly integrating physics-constrained fusion, dynamic uncertainty propagation, and adaptive filtering within a unified architecture. The results demonstrate that embedding uncertainty-aware processing directly into the measurement pipeline substantially improves consistency, robustness, and real-time reliability in industrial PV monitoring systems.