Various wastewater treatment technologies are available today and biological processes are predominantly used in these technologies. Increasing wastewater treatment systems produces large amounts of sewage sludge with variable quantities and qualities, which must be properly managed. Anaerobic and aerobic digestion and composting are major strategies to treat this sludge. The main indicators of biological stabilization are volatile fatty acids (VFAs), volatile solids (VS), the carbon/nitrogen (C/N) ratio, humic substances (HS), the total organic carbon (TOC), the carbon dioxide (CO2) evolution rate, the specific oxygen uptake rate (SOUR), and the Dewar test; however, different criteria exist for the same indicators. Although there is no consensus for defining the stability of sewage sludge (biosolids) in the research and regulations reviewed, controlling the biological degradation, vector attraction, and odor determines the biological stabilization of sewage sludge. Because pollutants and pathogens are not completely removed in biological stabilization processes, further treatments to improve the quality of biosolids and to ensure their safe use should be explored.
12 December 2024 in Environmental Technology & Innovation
The quality and stability of sewage sludge generated in municipal wastewater treatment plants are strongly influenced by treatment technology and post-treatment processes. Extended aeration activated sludge (EAAS) systems operate at long solids retention times, which may promote partial aerobic stabilization of the biomass; however, additional treatment is often required to ensure adequate biological stability and hygienization. This study evaluated, at pilot scale, the influence of three sludge dehydration strategies, namely, conventional drying beds (ConDry), solar drying (SolDry), and solar drying combined with ultraviolet radiation (SolDry + UV), on moisture reduction, biological stability, and fecal coliform removal. Sludge samples were obtained from two EAAS systems operating under contrasting climatic and operational conditions. The SolDry + UV strategy exhibited the highest drying efficiency, achieving moisture contents below 60% within 19 days for EAAS1 and 26 days for EAAS2. Solar-based strategies significantly enhanced volatile solids reduction, reduced specific oxygen uptake rates, and promoted greater pathogen removal compared to conventional drying. Overall, the results demonstrate that solar drying, particularly when combined with UV irradiation, substantially improves sludge stabilization and hygienization, enabling the attainment of Class A biosolid quality and supporting its safe agricultural reuse.
27 December 2023 in Ingeniería Investigación y Desarrollo