Low Power Wide Area Networks (LPWAN) are suitable for many applications that require low energy consumption, support for a high number of nodes, and large coverage range. LoRa (Long Range) is one of the most successful LPWAN technologies, as it enables robust long-distance low power communications and it is proven to be effective in IoT applications, such as environmental monitoring and smart metering. LoRa is also promising for Industrial Internet of Things (IoT) scenarios, but its adoption is impaired by the relevant standardized MAC protocol, LoRaWAN, that does not offer support to real-time data flows. For this reason, this paper proposes RT-LoRa, a medium access strategy for LoRa that provides support for real-time flows, thus enabling the implementation of LoRa-based LPWAN for industrial IoT applications. The paper describes RT-LoRa, presents a simulative assessment in a realistic industrial IoT scenario and provides some guidelines for the configuration of an RT-LoRa network.
17 June 2022 in IEEE Transactions on Industrial Informatics
The Time-Sensitive Networking (TSN) set of standards allows to support on the same channel the different kinds of traffic flows that are typically found in automotive scenarios. This article proposes the introduction of online Earliest Deadline First-based scheduling in TSN to provide support for event-driven real-time traffic. The proposed approach, called Deadline-TSN, is an online approach, and therefore, unlike other approaches in the literature, it does not require complex offline schedule calculations. Moreover, Deadline-TSN is able to uniformly deal with real-time periodic and event-driven traffic flows. This article presents Deadline-TSN and provides both worst-case response time analysis and simulative assessments in realistic automotive scenarios.
Industrial Wireless Sensor Networks (IWSN) are used to acquire sensor data that need realtime processing, therefore they require predictable behavior and real-time guarantees. To be cost-effective, IWSN are also expected to be low-cost and low-power. In this context, Bluetooth Low Energy (BLE) is a promising technology, as it allows to implement low-cost industrial networks. As BLE is a shortrange technology, a multi-hop mesh network is needed to cover a large area. Nevertheless the recently published Bluetooth mesh networking specifications do not provide support for real-time communications over multi-hop mesh networks. To overcome this limitation, this paper proposes the Multi-hop Real-time BLE (MRT-BLE) protocol, a real-time protocol developed on top of BLE, that allows for bounded packet delays over mesh networks. MRT-BLE also provides priority support. The paper describes in detail the MRT-BLE protocol and how to implement it on Commercial-Off-The-Shelf devices. Two kinds of performance evaluation for the MRT-BLE protocol are provided. The first one is a worst-case end-to-end delay analysis, while the second one is based on experimental results obtained through measurements on a real testbed.
Automated driving requires correct perception of the surrounding environment in any driving condition. To achieve this result, not only are many more sensors than in current Advanced Driver Assistant Systems (ADAS) needed, but such sensors are also of different types, such as radars, ultrasonic sensors, LiDARs, and video cameras. Given the high number of sensors and the bandwidth requirements of some of them, high-bandwidth automotive-grade networks are required. Ethernet technology is a suitable candidate, as it offers a broad selection of automotive-grade Ethernet physical layers, with transmission speeds ranging from 10 Mbps to 10 Gbps. In addition, the Time-Sensitive Networking (TSN) family of standards offers several features for Ethernet-based networks that are suitable for automotive communications, such as high reliability, bounded delays, support for scheduled traffic, etc. In this context, this paper provides an overview of Ethernet-based in-car networking and discusses novel trends and future developments in automotive communications.
Among the Low-Power Wide Area technologies available today, LoRa is one of the most successful, as it enables robust long-distance low-power communications in the unlicensed sub_GHz Industrial, Scientific and Medical band. A number of solution providers and network operators show much interest in this technology for Industry 4.0 applications. In addition, LoRa represent a promising candidate for boosting future Industrial Internet of Things networks and services. However, the current standardized LoRaWAN Medium Access Control (MAC) protocol over LoRa does not fully cope with the requirements of industrial networks, in particular as far as the scheduling of real-time data flow is concerned. To overcome this limitation, this paper proposes Industrial LoRa, a novel medium access strategy for LoRa that enables the implementation of industrial wireless networks for Industrial Internet of Things and Industry 4.0 applications. The paper describes the proposed MAC scheme and the advantages it provides. A simulative assessment shows the performance of the proposed approach in a realistic scenario that is compliant with the requirements of soft real-time applications in Industry 4.0.