Rendering the unique features of individual nanoscale constituents into macroscopic thin films remains technologically challenging; the engineering of these constituents habitually compromises their inherent properties. Efficient, environmentally benign, and biodegradable DNA and cetyltrimethyl-ammonium chloride-modified DNA (DNA-CT) thin films (TFs) implanted with titania nanoparticle-coated multiwalled carbon nanotubes (MCNT-TiO2) are prepared by a drop-casting technique. The energy dispersive X-ray spectroscopy studies of DNA and DNA-CT TFs with MCNT-TiO2 identifies various elements (C, O, N, P, Na, and Ti) via quantitative microanalysis. The X-ray photoelectron, Raman, Fourier-transform infrared (FTIR), and UV-visible absorption spectra show changes in the chemical compositions and functional groups associated with binding energies, enhancement of characteristic MCNT-TiO2 Raman bands, and intensity changes and peak shifts of the FTIR and UV-Vis-NIR absorption bands, respectively. The PL spectra indicate an energy transfer in the measured samples, and the quenching of PL indicates a decrease in the recombination efficiency. Lastly, we measure the conductivity, which increased with an increasing concentration of MCNT-TiO2 in the DNA and DNA-CT TFs due to the better connectivity of MCNT-TiO2. By using these materials, the optoelectronic properties of DNA and DNA-CT TFs implanted with MCNT-TiO2 are easily tunable, enabling several engineering and multidisciplinary science applications, such as photonics, electronics, energy harvesting, and sensors.
Natural polymer‐based and self‐powered bioelectronic devices are attracting attention owing to an increased interest in human health monitoring and human–machine interfaces. However, obtaining both high efficiency and multifunctionality from a single natural polymer‐based bioelectronics platform is still challenging. Here, molybdenum disulfide (MoS 2 ) nanoparticle‐ and carbon quantum dot (CQDs)‐incorporated deoxyribonucleic acid (DNA) nanocomposites are reported for energy harvesting, motion sensing, and charge storing. With nanomaterial‐based electrodes, the MoS 2 ‐CQD‐DNA nanocomposite exhibits a high triboelectric open‐circuit voltage of 1.6 kV (average) and an output power density of 275 mW cm −2 , which is sufficient for turning on hundred light‐emitting diodes and for a highly sensitive motion sensing. Notably, the triboelectric performance can be tuned by external stimuli (light and thermal energy). Thermal and photon energy absorptions by the nanocomposite generate additional charges, resulting in an enhanced triboelectric performance. The MoS 2 ‐CQD‐DNA nanocomposite can also be applied as a capacitor material. Based on the obtained electronic properties, such as capacitances, dielectric constants, work functions, and bandgaps, it is possible that the charges generated by the MoS 2 ‐CQD‐DNA triboelectric nanogenerator can be stored in the MoS 2 ‐CQD‐DNA capacitor. A new way is presented here to expand the application area of self‐powered devices in wearable and implantable electronics.
We fabricated synthetic double-crossover (DX) DNA lattices and natural salmon DNA (SDNA) thin films, doped with 3 combinations of double divalent metal ions (M 2+ )-doped groups (Co 2+ –Ni 2+ , Cu 2+ –Co 2+ , and Cu 2+ –Ni 2+ ) and single combination of a triple M 2+ -doped group (Cu 2+ –Ni 2+ –Co 2+ ) at various concentrations of M 2+ ([M 2+ ]). We evaluated the optimum concentration of M 2+ ([M 2+ ] O ) (the phase of M 2+ -doped DX DNA lattices changed from crystalline (up to ([M 2+ ] O ) to amorphous (above [M 2+ ] O )) and measured the current, absorbance, and photoluminescent characteristics of multiple M 2+ -doped SDNA thin films. Phase transitions (visualized in phase diagrams theoretically as well as experimentally) from crystalline to amorphous for double (Co 2+ –Ni 2+ , Cu 2+ –Co 2+ , and Cu 2+ –Ni 2+ ) and triple (Cu 2+ –Ni 2+ –Co 2+ ) dopings occurred between 0.8 mM and 1.0 mM of Ni 2+ at a fixed 0.5 mM of Co 2+ , between 0.6 mM and 0.8 mM of Co 2+ at a fixed 3.0 mM of Cu 2+ , between 0.6 mM and 0.8 mM of Ni 2+ at a fixed 3.0 mM of Cu 2+ , and between 0.6 mM and 0.8 mM of Co 2+ at fixed 2.0 mM of Cu 2+ and 0.8 mM of Ni 2+ , respectively. The overall behavior of the current and photoluminescence showed increments as increasing [M 2+ ] up to [M 2+ ] O , then decrements with further increasing [M 2+ ]. On the other hand, absorbance at 260 nm showed the opposite behavior. Multiple M 2+ -doped DNA thin films can be used in specific devices and sensors with enhanced optoelectric characteristics and tunable multi-functionalities.