Thick‐film all‐small‐molecule (ASM) organic solar cells (OSCs) are preferred for large‐scale fabrication with printing techniques due to the distinct advantages of monodispersion, easy purification, and negligible batch‐to‐batch variation. However, ASM OSCs are typically constrained by the morphology aspect to achieve high efficiency and maintain thick film simultaneously. Specifically, synchronously manipulating crystallinity, domain size, and phase segregation to a suitable level are extremely challenging. Herein, a derivative of benzodithiophene terthiophene rhodanine (BTR) (a successful small molecule donor for thick‐film OSCs), namely, BTR‐OH, is synthesized with similar chemical structure and absorption but less crystallinity relative to BTR, and is employed as a third component to construct BTR:BTR‐OH:PC71BM ternary devices. The power conversion efficiency (PCE) of 10.14% and fill factor (FF) of 74.2% are successfully obtained in ≈300 nm OSC, which outperforms BTR:PC71BM (9.05% and 69.6%) and BTR‐OH:PC71BM (8.00% and 65.3%) counterparts, and stands among the top values for thick‐film ASM OSCs. The performance enhancement results from the enhanced absorption, suppressed bimolecular/trap–assisted recombination, improved charge extraction, optimized domain size, and suitable crystallinity. These findings demonstrate that the donor derivative featuring similar chemical structure but different crystallinity provides a promising third component guideline for high‐performance ternary ASM OSCs.
16 September 2019 in ACS Applied Materials & Interfaces
The rapid development of non-fullerene acceptors (NFAs) has placed increasing demands on polymer donors and there is still room for optimization of the currently available top-performing polymer donors to work perfectly with the state-of-the-art NFAs. To further develop and fine-tune the best-performing polymer donors, random ternary copolymerization is a simple and powerful strategy, in which the search for a suitable and easily accessible third component is the challenge. Herein, a series of terpolymer donors OPz11, OPz12, OPz13 and OPz14 are synthesized by incorporating varying fractions of the ester-substituted thiazole (E-Tz) unit into the D18 polymer. Notably, the subtle E-Tz content brings optimization in the energy levels, electrostatic potentials (ESPs), molecular aggregation, miscibility and morphology, as revealed by the open circuit voltage (VOC) improvement from 856.1 to 865.3 mV, and fill-factor (FF) enhancement from 74.34% to 78.71%. Finally, an exciting power conversion efficiency (PCE) of 18.42% is obtained from OPz11:Y6 devices, and is among the highest values reported for PSCs. This work illustrates that the accessible E-Tz unit is a promising building block to construct terpolymer donors for high-performance organic photovoltaic cells, and random ternary copolymerization is a flexible and promising strategy for photovoltaic materials development.