Parviz Enany

Dr. Parviz Enany

TU Bergakademie Freiberg, Freiberg, Saxony, Germany
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 August 2021 in Mine Water and the Environment
Verified
Journal Article
Open access
PDF file
Parviz EnanyParviz Enany
Parviz Enany
OSOleksandr Shevchenko
Oleksandr Shevchenko
CDCarsten Drebenstedt
Carsten Drebenstedt
This paper presents experimental studies on the optimization of air–water flow in an airlift pump. Airlift pumps use compressed gas to verticall transport liquids and slurries. Due to the lack of theoretical equations for designing and predicting flow regimes, experimental investigations must be carried out to find the best condition to operate an airlift pump at high efficiency. We used a new air injection system and different submergence ratios to evaluate the output of a simple pump for vertical displacement of water in an underground mine. The tests were carried out in a new device with 5.64 m height and 10.2 cm circular riser pipe. Three air-jacket pipes, at different gas flows in the range of 0.002–0.09 m3/s were investigated with eight submergence ratios. It was found that with the same air flow rate, the most efficient flow of water was achieved when an air jacket with 3 mm diameter holes was used with a submergence ratio between 0.6 and 0.75. In addition, a comparison of practical results with two theoretical models proposed by other investigators showed that neither was able to accurately predict airlift performance in air–water flow mode.

5 March 2022 in Fluids
Verified
Journal Article
Open access
PDF file
Parviz EnanyParviz Enany
Parviz Enany
OSOleksandr Shevchenko
Oleksandr Shevchenko
CDCarsten Drebenstedt
Carsten Drebenstedt
This paper presents the optimal conditions for fast transfer of solid particle with an airlift pump. The experimental examinations were carried out in an airlift pump with a length of 5.64 m and an inner diameter of 0.102 m in order to determine the impact of submergence ratio, air flow, and physical particle properties, such as shape, size, and density, on the vertical velocity of the particle in detail. The results showed that with the same air flow, the maximum particle velocity was achieved when the churn flow regime is established with a submergence ratio close to 0.89. However, in bubble and slug flow, it is not possible to carry a large particle in the dimensions of centimeters. Furthermore, in a churn flow, the velocity of the particle exceeds the velocity of pumped water; hence, water is not the only particle carrier in a vertical three-phase flow.

24 July 2023 in International Journal of Coal Science & Technology
Verified
Journal Article
Open access
PDF file
Parviz EnanyParviz Enany
Parviz Enany
OSOleksandr Shevchenko
Oleksandr Shevchenko
CDCarsten Drebenshtedt
Carsten Drebenshtedt
One of the crucial aspects of reducing air consumption when conveying particles with an airlift pump is to know the factors that affect the process of particle motion at an initial velocity of zero. To determine the influence of submergence ratio and physical properties of particles (such as size, shape, and mass) on the onset of vertical particle motion, the airlift pump was taken as the research object, and spherical glass together with irregular shaped coal were used as experimental test particles. The results show that unlike the water-solid environment, the start of particle motion in the water-air mixture does not always occur at a certain value of superficial water velocity and this value also increases with increasing submergence level. Among the parameters considered, the role of submergence ratio is much more effective than the dimensions and the shape of the particle, because by increasing submergence from 0.3 to 0.8, it is possible to reduce air consumption by up to 8 times. Based on this study the corresponding theoretical model derived by Fujimoto et al. is optimized, wherein the overall agreement between the modified theory and present experimental data is particularly good. Contrary to Fujimoto, the minimum superficial water velocity for lifting solids in the air-water mixture is not always smaller than water ambient which indicates on optimum submergence ratio higher than 0.7. Finally, a new criterion was introduced to describe the moment of onset of the particle motion as a function of the superficial fluid velocity ratio for each submergence value.

20 March 2024 in International Journal of Coal Science & Technology
Verified
Journal Article
Open access
PDF file
Parviz EnanyParviz Enany
Parviz Enany
CDCarsten Drebenshtedt
Carsten Drebenshtedt
In this study, the installation of an airlift pump with inner diameter of 102 mm and length of 5.64 m was utilized to consider the conveying process of non-spherical coal particles with density of 1340 kg/m3 and graining 25–44.5 mm. The test results revealed that the magnitude of increase in the solid transport rate due to the changes in the three tested parameters between compressed air velocity, submergence ratio, and feeding coal possibility was not the same, which are stand in range of 20%, 75%, and 40%, respectively. Hence, creating the optimal airlift pump performance is highly dependent on submergence ratio. More importantly, we measured the solid volume fraction using the method of one-way valves in order to minimize the disadvantages of conventional devices, such as fast speed camera and conductivity ring sensor. The results confirmed that the volume fraction of the solid phase in the transfer process was always less than 12%. To validate present experimental data, the existing empirical correlations together with the theoretical equations related to the multiphase flow was used. The overall agreement between the theory and experimental solid delivery results was particularly good instead of the first stage of conveying process. This drawback can be corrected by omitting the role of friction and shear stress at low air income velocity. It was also found that the model developed by Kalenik failed to predict the performance of our airlift operation in terms of the mass flow rate of the coal particles.