Transparent conducting materials (TCMs) are essential components for a variety of optoelectronic devices, such as photovoltaics, displays and touch screens. In recent years, extensive efforts have been made to develop TCMs with both high electrical conductivity and optical transmittance. Based on material types, they can be mainly categorized into the following classes: metal oxides, metal nanowire networks, carbon-material-based TCMs (graphene and carbon nanotube networks) and conjugated conductive polymers (PEDOT:PSS). This review will discuss the fundamental electrical and optical properties, typical fabrication methods and the applications in solar cells for each class of TCMs and highlight the current challenges and potential future research directions.
23 November 2017 in Journal of Physics D: Applied Physics
p -type transparent conducting Cu alloyed ZnS thin films from Cu Zn S targets ( , 0.2, 0.3, 0.4, and 0.5) were deposited on glass substrates via radio frequency sputtering. x-ray diffraction and TEM–SAED analysis show that all the films have sphalerite ZnS as the majority crystalline phase. In addition, films with 30% and 40% Cu show the presence of increasing amounts of crystalline Cu 2 S phase. Conductivity values ⩾400 S were obtained for the films having 30% and 40% Cu, with the maximum conductivity of 752 S obtained for the film with 40% Cu. Temperature dependent electrical transport measurements indicate metallic as well as degenerate hole conductivity in the deposited films. The reflection-corrected transmittance of this Cu alloyed ZnS (40% Cu) film was determined to be ⩾75% at 550 nm. The transparent conductor figure of merit ( ) of the Cu alloyed ZnS (40% Cu), calculated with the average value of transmittance between 1.5 to 2.5 eV, was ≈276 .
9 January 2018 in The Journal of Physical Chemistry C
Highly conducting and transparent thin films of La x Ba
1 −
x SnO 3 (x = 0, 0.01 and 0.05) were grown on quartz substrates via pulsed laser deposition. Conductivity increases in orders of magnitude upon vacuum annealing of the as–deposited films. This is attributed to the significant enhancement in carrier concentration due to the increased oxygen vacancy defects (V ). Enhanced carrier concentration improves the metallicity in the films at room temperature. Metal to semiconductor transition (MST) is observed in the films with n e 10 19 cm −3 at low temperatures. The MST shifts towards absolute zero temperature as the carrier concentration in the film increases. Low–temperature resistivity analysis suggests that the charge transport is mainly governed by strong electron–electron interaction. UV–Vis spectroscopy confirms a 60%–80% transmittance in the visible range (400–800 nm) for all the films. Due to the large change in carrier concentration, Burstein Moss (BM) shift is observed, and the bandgap ranges between 3.65–3.98 eV. The effective mass of electron and refractive index estimated from the BM shift and transmittance are found to be 0.6 m e and 2, respectively.