Zhenjiao Sun

Dr. Zhenjiao Sun

Shandong University of Science and Technology, Qingdao, Shandong, China
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 March 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HMHui Ma
Hui Ma
Zhenjiao SunZhenjiao Sun
Zhenjiao Sun
GMGuanguo Ma
Guanguo Ma
Traditional natural river sand is used as a fine aggregate for concrete, but due to the severe environmental situation in recent years, many places have asked for a ban or restriction on the extraction of river sand. This has resulted in an increasing demand for concrete using machine-made sand instead of natural sand. The estimation and prediction of the compressive strength of concrete is very important in civil engineering applications. In this investigation, a Box–Behnken test model was established to analyze the effect of stone powder (SP), pulverized fuel ash (PFA), and silica fume (SF) contents on the compressive strength of manufactured sand concrete using response surface methodology (RSM). A prediction model for the compressive strength of manufactured sand concrete was developed using multiple regression analysis with SP, PFA, and SF content as factors and compressive strength as the response value. In addition, the interaction of stone powder (SP), pulverized fuel ash (PFA), and silica fume (SF) content was analyzed according to the response surface and contour. The investigation showed that for single factors, SP had the greatest effect on the compressive strength of the manufactured sand concrete, with PFA having the second greatest effect, and SF the least; for the interactions, SP and PFA had the most significant effect, and the interaction between SP and SF and PFA and SF had the same effect on the compressive strength.

30 March 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GMGuanguo Ma
Guanguo Ma
HMHui Ma
Hui Ma
Zhenjiao SunZhenjiao Sun
Zhenjiao Sun
To solve the problems in determining the interactions among particles and between particles and pipe walls in pneumatic conveying systems in field tests, this article studied the two-phase flow motion characteristics of shotcrete in pipes based on a CFD–DEM coupling model and field measurement. The movement of the shotcrete, which is affected by the gas phase in the pipe, was simulated for different bend angles, and the velocity of the shotcrete material and pressure distribution within the pipeline were determined. The simulation results show that at the ideal wind pressure, the inelastic collisions among the particles and between the particles and pipe wall cause the accumulation of shotcrete material in the outside area of the bent pipe section, which may block the pipe; nevertheless, the blockage is prevented by the turbulent and secondary flows, which disperse the particles to different degrees. In addition, the wear amounts caused by particles in pipes with different bend angles were quantified. With increasing bend angle, the wear points gradually diffuse radially toward the outside wall of the bent pipe. Additionally, the wear loss decreases and then increases with increasing bend angle. The particle velocity exhibits the minimal loss at a bend angle of 90°. It was concluded that the energy loss of the aggregate particles in the elbow of the pipe is approximately 30 times that in a horizontal, straight pipe. The results of this study can provide guidance in the construction field and for numerical simulations of the pneumatic conveying process of shotcrete.

17 March 2022 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
GMGuanguo Ma
Guanguo Ma
Zhenjiao SunZhenjiao Sun
Zhenjiao Sun
HMHui Ma
Hui Ma
PLPengcheng Li
Pengcheng Li
To obtain the contact parameters of the moist bulk of shotcrete accurately and quickly, this study calibrated the contact parameters of the moist bulk of shotcrete by physical stacking test and simulation method. Based on the HertzMindlin with JKR (JohnonKendallRoberts) model, the discrete element simulation is carried out. Using P-BD to screen seven initial parameters, it is found that JKR surface energy, rolling friction coefficient between particles and restitution coefficient of particle impact have significant effects on the angle of repose of the moist bulk of shotcrete. According to B-BD, the second-order regression model of angle of repose and significance parameters was established. Three significant parameters were obtained: JKR surface energy 0.418J/m2, rolling friction coefficient 0.06 and static friction coefficient 1. The angle of repose obtained by simulation is compared with the physical test value, and the relative error is 1.88. The results show that the calibration method proposed in this study can accurately simulate the physical stacking test, and can provide a reference for the calibration of contact parameters of the moist bulk of shotcrete.

17 June 2022 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Closed access
PDF file
Lianjun ChenLianjun Chen
Lianjun Chen
Zhenjiao SunZhenjiao Sun
Zhenjiao Sun
PLPengcheng Li
Pengcheng Li
HMHui Ma
Hui Ma
GPGang Pan
Gang Pan

29 December 2023 in Materials
Verified
Journal Article
Open access
PDF file
KGKang Gao
Kang Gao
Zhenjiao SunZhenjiao Sun
Zhenjiao Sun
HMHui Ma
Hui Ma
GMGuanguo Ma
Guanguo Ma
Due to the impact of economic and social development on the environment, there is an increasing demand for manufactured sand to replace natural sand as fine aggregate for concrete. At the same time, the effect of admixtures on the rheological properties and compressive strength of concrete is crucial in civil engineering applications. In this study, with the Box–Behnken test model, we analyzed and investigated the impact of a composite admixture of stone powder (SP), pulverized fuel ash (PFA), and silicon fume (SF) on the compressive strength of siliceous manufactured sand concrete using response surface methodology (RSM). At the same time, the rheological properties of the siliceous artificial sand and river sand concrete were analyzed. The prediction of the compressive strength of siliceous artificial sand concrete was developed using multiple regression analysis, the factors of which were SP, PFA, and SF content, and the response value was compressive strength. Furthermore, response surface and contour lines were used to analyze the impact of composite admixtures. It is shown that the compounding of SP, PFA, and SF improve the rheological properties of manufactured sand concrete. For the single factor, SP has the greatest effect on the compressive strength of mechanism sand concrete and SF has the least effect. For compounding, SP and PFA have the most significant effect on the compressive strength of artificial sand shotcrete, and the compounding of PFA and SF have the least effect.

22 May 2023 in Processes
Verified
Journal Article
Open access
PDF file
Zhenjiao SunZhenjiao Sun
Zhenjiao Sun
Lianjun ChenLianjun Chen
Lianjun Chen
GMGuanguo Ma
Guanguo Ma
HMHui Ma
Hui Ma
KGKang Gao
Kang Gao
The pressure drop and conveying stability caused by the bend significantly affect the pneumatic conveying process of stiff shotcrete, which is the key to solving the problem of long-distance transportation. In this paper, the effects of different air velocities (32 m/s, 36 m/s, 40 m/s), water-cement ratios (0.1, 0.2, and 0.3), and bending-diameter ratios (4, 12, and 20) on the pressure drop of the elbow R1 and conveying stability R2 are studied using the response surface method. The conveying stability is characterized by the pressure variation coefficient (C.V). The response surface graph aids in the intuitive analysis of the effects of these variables. The results show that the impact of air velocity on R1 and R2 is exceptionally significant, and the interaction of each factor on the response value is analyzed. The response value and the quadratic polynomial regression equation between the various factors are obtained in addition to the flow characteristics of stiff shotcrete under different working conditions. The relationship established by the statistical processing of the experimental results can provide some reference for specifying the pressure loss model of stiff shotcrete.