Ashish Vashishtha

Dr. Ashish Vashishtha

Aerospace & Mechanical Engineering, South East Technological University, Carlow Campus, Carlow, Ireland
orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2008 in The Aeronautical Journal
Verified
Journal Article
Closed access
PDF file
HSH. Sharma
H. Sharma
Ashish VashishthaAshish Vashishtha
Ashish Vashishtha
ERE. Rathakrishnan
E. Rathakrishnan
PLP. Lovaraju
P. Lovaraju
An experimental investigation was carried out to find the effect of an annular co-flow jet on the primary supersonic jet from Mach 2 nozzle at different levels of overexpansion. In this study, a convergent-divergent circular nozzle of exit Mach number 2, surrounded by an annular convergent circular nozzle with an annular gap of 4·4mm was used. Nozzle pressure ratios (NPRs) 3, 4, 5, 6, 7 are investigated for overexpanded states of the primary jet and NPR 8 is investigated for almost correctly expanded state. The centreline pressure distributions were taken at all NPRs for both with and without co-flow case, to investigate the supersonic core extent and mixing activity in the jet field. In the radial direction pitot pressure at different axial locations at all NPRs for both the cases are measured to find the jet development and shadowgraph visualisation of jet structure was done to visualise the shock structure in near-field. It is found that the co-flow acts as mixing inhibitor at all levels of overexpansion for Mach 2 nozzle.

12 January 2025 in Aerospace
Verified
Journal Article
Open access
PDF file
RKRushikesh Kore
Rushikesh Kore
Ashish VashishthaAshish Vashishtha
Ashish Vashishtha
Solid propellants play a crucial role in various civil, scientific, and defence-related aerospace propulsion applications due to their efficient energy release, high energy density, low fabrication cost, and ease of operation. Ammonium dinitramide (ADN) has gained considerable attention as a potential oxidizer for green solid propellants due to its high oxygen content, significant energy density, non-toxicity, and non-polluting combustion products, leading to lower environmental impact. As ADN is a new desirable oxidizer in the field of solid propellants, understanding the practicality and viability of the use of ADN in composite solid propellants necessitates a thorough understanding of its chemical and thermal decomposition pathways in addition to its combustion characteristics in the presence of other ingredients. ADN is being explored as an alternative to the traditionally used ammonium perchlorate (AP), a toxic oxidizer containing chlorine (Cl). Additionally, AP monopropellants often suffer from moderate burning rates and poor mechanical strength. To address these limitations, researchers have explored the incorporation of metal additives, such as aluminium (Al), magnesium (Mg), and metalloid boron (B), to enhance the combustion performance and burn rate of AP. These metals not only act as energy-rich additives but also influence the combustion process through various mechanisms. The incorporation of metal additives into ADN has shown promising enhancements in the overall energetic performance of green solid propellants. This review aims to provide an in-depth analysis of the thermal decomposition of ADN and its combustion behaviour, along with the combustion of ADN-based solid propellants with metal additives. Finally, based on an extensive review of the existing literature, various research pathways for focused future collaborative efforts are identified to further advance ADN-based “green” solid propellants.

1 December 2008 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
Verified
Journal Article
Closed access
Ashish VashishthaAshish Vashishtha
Ashish Vashishtha
ERE Rathakrishnan
E Rathakrishnan
This paper presents the results and the physics behind the process which results in the reduction of pressure drag of blunt-nosed body by passive control in form of breathing nose at a supersonic Mach number. The drag of a blunt-nosed body with and without breathing nose at Mach 1.96 is compared. The breathing nose is found to reduce the drag on the body by manipulating the high pressure at the nose and the low pressure at the base simultaneously. The shock at the nose of the body becomes weaker when the hole at the nose is open. Direct measurement of drag and the pressure at the nose and at the surface downstream of the nose has been carried out. Flow field around the body with and without breathing nose has been visualized with shadowgraph. A maximum drag reduction of 21 per cent was obtained at NPR 2. This is because of the combined effect of the decrease of high pressure at the nose and increase of low pressure at the base, due to the breathing through the nose hole.

18 June 2015
Verified
Conference Paper
Closed access
Ashish VashishthaAshish Vashishtha
Ashish Vashishtha
YWYasumasa Watanabe
Yasumasa Watanabe
KSKojiro Suzuki
Kojiro Suzuki

4 June 2022 in Energies
Verified
Journal Article
Open access
PDF file
Ashish VashishthaAshish Vashishtha
Ashish Vashishtha
SPSnehasish Panigrahy
Snehasish Panigrahy
DCDino Campi
Dino Campi
DCDean Callaghan
Dean Callaghan
CNCathal Nolan
Cathal Nolan
RDRalf Deiterding
Ralf Deiterding
This numerical study investigates the effects of adding a small amount of ignition promoters for controlling the wedge-induced oblique shock wave (OSW) to oblique detonation wave (ODW) transition in a premixed hydrogen–air mixture at hypersonic speeds. The time-dependent two-dimensional compressible Euler equations for multiple thermally perfect species with a reactive source term are solved using adaptive mesh refinement and detailed chemical kinetics. The wedge with a fixed angle of 26° exhibits abrupt to smooth transitions for freestream Mach numbers 7–9 (speeds 2.8–3.2 km/s) at a pressure of 20 kPa and a temperature of 300 K. The small amount (1000 PPM by vol.) of H2O2 and O3 is found to be effective at significantly reducing the initiation length for the oblique detonation transition for all Mach numbers, which suggests a practical approach to increase the operating flight range for oblique detonation wave engine with a finite length wedge. At Mach number 8, the abrupt OSW to ODW transition turns towards a smooth transition with a small amount of H2O2 and O3 addition. Comparatively, O3 addition was found to be effective in reducing the ODW initiation length by promoting reactivity behind even a weaker oblique shock at low Mach number 7, for abrupt transition, while H2O2 addition was more effective than O3 at high Mach numbers 8 and 9, during a smooth transition. The maximum 73% and 80% reduction in initiation length of ODW was observed with 10,000 PPM H2O2 and O3 addition, respectively, during an abrupt OSW to ODW transition at Mach 7.

1 January 2021 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
Ashish VashishthaAshish Vashishtha
Ashish Vashishtha
DCDean Callaghan
Dean Callaghan
CNCathal Nolan
Cathal Nolan
The main motivation of the current study is to propose a high-pressure hydrogen injection as an hybrid active flow control technique in order to manipulate the flow-field in front of a blunt nose during hypersonic flight. Hydrogen injection can lead to self-ignition under the right environment conditions in a stagnation zone, and may cause thermal heat addition through combustion and provide the counterjet effect together by pushing bow shock upstream. The axisymmetric numerical simulations for the hemispherical blunt nose are performed at a Mach 6 freestream flow with 10000 Pa pressure and 293 K temperature. The sonic and supersonic hydrogen and air injections are compared for drag reduction at the same stagnation pressure ratio PR and momentum ratio (RMA). The sonic air and hydrogen injection scenarios show similar performance in terms of drag reduction and similar SPM flow features, but hydrogen injection has a mass flow rate 3.76 times lower than air. Supersonic hydrogen injection at Mj 2.94 behaves differently than supersonic air injection and can achieve up to 60 % drag reduction at lower PR and LPM mode with lower mass flow rate. Additionally, air injection achieves a drag reduction of 40 % in SPM mode at higher PR with very high mass flow rate.