Zoey Rosen

Dr. Zoey Rosen

Communication and Media Studies, Fordham University, New York, USA
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 March 2024 in GeoHealth
Verified
Journal Article
Open access
OSOlivia Sablan
Olivia Sablan
BFBonne Ford
Bonne Ford
EGEmily Gargulinski
Emily Gargulinski
MHMelanie S. Hammer
Melanie S. Hammer
GHGiovanna Henery
Giovanna Henery
EFEmily V. Fischer
Emily V. Fischer
Prescribed fires (fires intentionally set for mitigation purposes) produce pollutants, which have negative effects on human and animal health. One of the pollutants produced from fires is fine particulate matter (PM2.5). The Flint Hills (FH) region of Kansas experiences extensive prescribed burning each spring (March‐May). Smoke from prescribed fires is often understudied due to a lack of monitoring in the rural regions where prescribed burning occurs, as well as the short duration and small size of the fires. Our goal was to attribute PM2.5 concentrations to the prescribed burning in the FH. To determine PM2.5 increases from local burning, we used low‐cost PM2.5 sensors (PurpleAir) and satellite observations. The FH were also affected by smoke transported from fires in other regions during 2022. We separated the transported smoke from smoke from fires in eastern Kansas. Based on data from the PurpleAir sensors, we found the 24‐hr median PM2.5 to increase by 3.0–5.3 μg m−3 (based on different estimates) on days impacted by smoke from fires in the eastern Kansas region compared to days unimpacted by smoke. The FH region was the most impacted by smoke PM2.5 compared to other regions of Kansas, as observed in satellite products and in situ measurements. Additionally, our study found that hourly PM2.5 estimates from a satellite‐derived product aligned with our ground‐based measurements. Satellite‐derived products are useful in rural areas like the FH, where monitors are scarce, providing important PM2.5 estimates.

Zoey RosenZoey Rosen
Zoey Rosen
Channing BiceChanning Bice
Channing Bice
SSStephanie Scott
Stephanie Scott
This study examines the effect and efficacy of visual designs for messages about poor air quality. The study utilized a 2 (message efficacy: high vs. low) × 2 (message design: visual vs. text) between-subjects experimental design, of N = 95 students from a large Western university. This experiment assessed the effects of message design and efficacy of language on students’ visual comprehension, source credibility, self-efficacy, and protective behavioral intention. Hypotheses 1 and 2 were partially supported, finding that there were some statistically significant effects for efficacy and message design on students’ comprehension and protective behavioral intention. Future work should focus on strategies for more salient air quality health communication because wildfires will continue to impact the western United States.

18 September 2023 in Environmental Science: Atmospheres
Verified
Journal Article
Open access
PDF file
EWEric A. Wendt
Eric A. Wendt
BFBonne Ford
Bonne Ford
MCMichael Cheeseman
Michael Cheeseman
Zoey RosenZoey Rosen
Zoey Rosen
JPJeffrey Pierce
Jeffrey Pierce
JVJohn Volckens
John Volckens
Fine particulate matter (PM2.5) is a leading contributor to premature death, disease, and environmental degradation globally. Wildfire smoke is a primary source of air pollution in the United States. However, reference-grade ground monitors are cost prohibitive to deploy at the spatial scales needed to assess the variability of wildfire smoke. In many regions lacking adequate monitoring, health impact assessments and epidemiological studies on smoke may rely on satellite-based instruments, which estimate PM2.5 based on Aerosol Optical Depth (AOD). However, AOD measurements may not capture surface-level impacts; thus, measurements in under-monitored regions are necessary to interpret satellite observations. While low-cost PM2.5 sensors have been deployed at large scales, these sensors typically lack AOD measurement capability. In prior work, we designed the Aerosol Mass and Optical Depth (AMODv2) sampler, which can simultaneously measure PM2.5 (optical and gravimetric filter-based) and AOD. In this work, we distributed AMODv2s to volunteers at 31 locations in the contiguous United States, forming a nationwide network for the summer of 2021. A majority of our network was successful, with 86.6% of sampling periods resulting in a valid sample. We found our AOD sensors agreed closely with nearby (< 25 km) reference monitor measurements (taken < 180 seconds apart), with mean absolute error results of 0.03, 0.02, 0.02, and 0.03 at 440, 500, 675, and 870 nm, respectively. In a regional analysis of wildfire smoke, we observed elevated PM2.5 and AOD on smoky days at study sites in most regions, which led to similar PM2.5:AOD ratios regardless of smoke. However, at the California study sites, median PM2.5 remained similar on smoky days relative to non-smoky days, while AOD increased, implying that the smoke may have been lofted above the surface during the study period. At the California study sites, the median PM2.5:AOD ratio was 67.2 µg m-3 on non-smoky days, compared with 30.2 µg m-3 on smoky days. At study sites in other regions, the average ratio was 24.7 to 33.5 µg m-3 on non-smoky days and 20.3 to 29.4 µg m-3 on smoky days We show that paired PM2.5 and AOD measurements collected by a crowdsourced network can highlight anomalies in air quality during smoke events and provide insights into the relationship between satellite-based and ground-based air quality observations.

15 September 2021 in Atmospheric Measurement Techniques
Verified
Journal Article
Open access
PDF file
EWEric A. Wendt
Eric A. Wendt
CQCasey Quinn
Casey Quinn
CLChristian L'ORange
Christian L'ORange
DMDaniel D. Miller-Lionberg
Daniel D. Miller-Lionberg
BFBonne Ford
Bonne Ford
JVJohn Volckens
John Volckens
Atmospheric particulate matter smaller than 2.5 µm in diameter (PM2.5) has a negative impact on public health, the environment, and Earth's climate. Consequently, a need exists for accurate, distributed measurements of surface-level PM2.5 concentrations at a global scale. Existing PM2.5 measurement infrastructure provides broad PM2.5 sampling coverage but does not adequately characterize community-level air pollution at high temporal resolution. This motivates the development of low-cost sensors which can be more practically deployed in spatial and temporal configurations currently lacking proper characterization. Wendt et al. (2019) described the development and validation of a first-generation device for low-cost measurement of AOD and PM2.5: the Aerosol Mass and Optical Depth (AMODv1) sampler. Ford et al. (2019) describe a citizen-science field deployment of the AMODv1 device. In this paper, we present an updated version of the AMOD, known as AMODv2, featuring design improvements and extended validation to address the limitations of the AMODv1 work. The AMODv2 measures AOD and PM2.5 at 20 min time intervals. The sampler includes a motorized Sun tracking system alongside a set of four optically filtered photodiodes for semicontinuous, multiwavelength (current version at 440, 500, 675, and 870 nm) AOD sampling. Also included are a Plantower PMS5003 sensor for time-resolved optical PM2.5 measurements and a pump/cyclone system for time-integrated gravimetric filter measurements of particle mass and composition. AMODv2 samples are configured using a smartphone application, and sample data are made available via data streaming to a companion website (https://csu-ceams.com/, last access: 16 July 2021). We present the results of a 9 d AOD validation campaign where AMODv2 units were co-located with an AERONET (Aerosol Robotics Network) instrument as the reference method at AOD levels ranging from 0.02 ± 0.01 to 1.59 ± 0.01. We observed close agreement between AMODv2s and the reference instrument with mean absolute errors of 0.04, 0.06, 0.03, and 0.03 AOD units at 440, 500, 675, and 870 nm, respectively. We derived empirical relationships relating the reference AOD level to AMODv2 instrument error and found that the mean absolute error in the AMODv2 deviated by less than 0.01 AOD units between clear days and elevated-AOD days and across all wavelengths. We identified bias from individual units, particularly due to calibration drift, as the primary source of error between AMODv2s and reference units. In a test of 15-month calibration stability performed on 16 AMOD units, we observed median changes to calibration constant values of −7.14 %, −9.64 %, −0.75 %, and −2.80 % at 440, 500, 675, and 870 nm, respectively. We propose annual recalibration to mitigate potential errors from calibration drift. We conducted a trial deployment to assess the reliability and mechanical robustness of AMODv2 units. We found that 75 % of attempted samples were successfully completed in rooftop laboratory testing. We identify several failure modes in the laboratory testing and describe design changes that we have since implemented to reduce failures. We demonstrate that the AMODv2 is an accurate, stable, and low-cost platform for air pollution measurement. We describe how the AMODv2 can be implemented in spatial citizen-science networks where reference-grade sensors are economically impractical and low-cost sensors lack accuracy and stability.

27 January 2026 in GeoHealth
Verified
Journal Article
Open access
OSOlivia Sablan
Olivia Sablan
BFBonne Ford
Bonne Ford
EGEmily Gargulinski
Emily Gargulinski
GHGiovanna L. Henery
Giovanna L. Henery
HNHolly Nowell
Holly Nowell
JPJeffrey Pierce
Jeffrey Pierce
Smoke from agricultural fires is a potentially important source of fine particulate matter (PM 2.5 ) in the US. Sugarcane is burned in Florida to facilitate the harvesting process, with the majority of these fires occurring in the Everglades Agricultural Area (EAA), where there is only one regulatory air quality monitor. During the 2022–2023 sugarcane burning season (October–May), we used public low‐cost PurpleAir sensors, regulatory monitors, and 29 PurpleAir sensors deployed for this study to quantify PM 2.5 from agricultural fires. We found satellite imagery is of limited use for detecting smoke from agricultural fires in Florida due to the cloud cover, overnight smoke, and the fires being small and short‐lived. For these reasons, surface measurements are critical for capturing increases in PM 2.5 from smoke, and we used multiple smoke‐identification criteria. During the study period, median 24‐hour PM 2.5 concentrations increased by 2.3–6.9 μg m −3 on smoke‐impacted days compared to unimpacted days, with smoke observed on 4%–28% of the campaign days (ranges from the different smoke‐identification criteria). Further, short‐term PM 2.5 increases were observed over 40 μg m −3 during smoke events. We contrast the region near the EAA with large populations of low‐income and minoritized groups to the more affluent coastal region. The inland region experienced more smoke‐impacted monitor days than the Florida east coast region, and there was a higher study‐average smoke PM 2.5 concentration in the inland area. These findings highlight the need to increase air quality monitoring near the EAA.

1 July 2024 in Weather, Climate, and Society
Verified
Journal Article
Closed access
PDF file
Zoey RosenZoey Rosen
Zoey Rosen
MLMarilee Long
Marilee Long
ASAndrea Schumacher
Andrea Schumacher
MDMark DeMaria
Mark DeMaria
ABAlan Brammer
Alan Brammer
Map graphics are often used for hazard risk communication, layered with numerical, verbal, and visual information to describe an uncertain threat. In the hurricane context, graphics are used to communicate the probability of different threats over a forecasting period. While hurricane graphics have been studied in the past, they have not been designed with colorblind-friendly accessibility and localization in mind. This study presents the results of a mixed-method study, testing the perceptions of different color schemes and map overlays on a wind exceedance map graphic with samples of experts (emergency managers and meteorologists) and the public. Nineteen experts from Florida and Louisiana were interviewed about their preferences for and risk perceptions of the design elements of the new wind exceedance graphic. The graphic prototypes were also tested using a public sample (n = 624) from Florida and Louisiana to study participants’ design preferences and risk perceptions. Both expert and public samples preferred a yellow-to-red scheme, though experts thought the yellow-to-red scheme presented the hazard as riskier and the public thought the reds-only scheme was riskier. Experts and the public preferred a map graphic with overlays; they scored a map graphic with overlays as riskier than a version without overlays. Understanding the connection between color scheme preference and risk perception for both experts and the public has important implications on risk communication as new graphics are designed. The conclusion of this study provides avenues for future research for experts who want to apply universal design aspects into hurricane graphics. Significance Statement: This study investigates user preferences and risk perceptions for a new wind exceedance hurricane graphic designed with universal design principles. Experts (emergency managers and meteorologists) and the public from Florida and Louisiana participated in a mixed-method study, capturing qualitatively and quantitatively how a yellow-to-red and reds-only color scheme, as well as interstate or city overlays, impacted their engagement with the graphic. Studying the design features of forecast graphics from a social science perspective before they are operational is important, as the findings from this study reveal how different groups could perceive the graphic.