Efficient plant biomass utilization is a key component in advancing a sustainable and circular bioeconomy. ZnO nanoparticle synthesis using plant extracts is actively studied as a part of this effort. Here, green ZnO nanoparticles were prepared using Licania tomentosa Benth (also known as Oiti) leaf extract. Characterization of the produced green ZnO nanoparticles (NPs) involved X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR) and UV–Visible spectroscopy (UV-Vis) techniques. Furthermore, we investigated photocatalytic degradation of the crystal violet (CV) dye catalyzed by the obtained ZnO NPs and evaluated the efficiency of the photodegradation process. The synthesized nanoparticles have an average crystallite size of 12.4 nm, as measured by XRD and have a spherical shape as revealed by SEM. UV–Vis studies show that ZnO nanoparticles have a relatively small band gap of 2.75 eV, as estimated by Tauc plot. The photodegradation activity tests using synthesized green ZnO NPs showed that approximately 79% of CV dye is decomposed in 2 h after being exposed to UV irradiation under experimentally studied conditions. The photodecomposition of CV is impacted by different factors, such as the catalyst bandgap and loading, the pH and the intensity of light. Moreover, an optimum photocatalyst loading was determined. Our studies reveal that Oiti leaf extract can be efficiently used for ZnO NPs synthesis, which has significant potential for photodegradation applications.
9 December 2021 in Journal of Circuits, Systems and Computers
Organic material-based computer memory devices are critical for lowering the amount of electronic waste. Toward this end, we here present the resistive switching property of metal-insulator-metal type devices consisting of active layers made of raw organic cow milk. Our devices were made up of fat-free, medium cream, and full cream raw cow milk active layers sandwiched between indium-doped tin oxide and silver electrodes. These devices were created without the use of heat or electricity, and because they use cow milk as their active layers, they do not pollute the environment. The medium-fat milk film had a higher weight percentage of metallic ions than the fat-free and full-cream milk films, according to energy-dispersive X-ray spectroscopy analysis of the active layers. As a result, electrical characterization and memory studies revealed that conductive filaments driven by a space-charge-limited conduction mechanism were responsible for the “S-type” memory characteristics of the medium-fat milk-based device, with switching at remarkably low and . Furthermore, with over 30 write/erase cycles, this device demonstrated better non-volatile computer memory device prospects. Hoping conduction-driven conductive filaments, on the other hand, were linked to the behavior of devices that use fat-free and full-cream milk. Overall, our findings show that the fat and ion content of milk plays an important role in the morphology, transport, and switching of these devices.
Electronic devices made of organic materials are critical for sustainable technology and the reduction of electronic waste. In this paper, we report on the resistive switching (RS) behavior of an organic full cream cow milk-based film placed between two electrodes. The switching properties of the milk film were investigated for use in RS memory (ReRAM), a new type of memory device. Two devices were created: one with electrodes made of silver (Ag) and indium doped tin oxide (ITO) (Ag/cow milk/ITO) and the other with electrodes made of Ag and tungsten (W) (Ag/cow milk/W). The study is unique in two ways: (1) the use of the spin coat method, which allowed us to deposit 15 nm thin milk films, and (2) the use of ITO and W bottom electrodes, which allowed us to compare the results. Our findings show that both ITO- and W-based devices exhibit RS properties with “S-type” bipolar behavior. The ITO-based device exhibited switching at 0.77 V and an ION/IOFF ratio of . The memory behavior of this device lasted ∼7 write/erase cycles, indicating the possibility of nonvolatile memory application. In contrast, the switching in the W-based device was characterized by low (0.1 V) voltage, and it lasted for only one cycle. Increasing the compliance current to 0.5 A improved the ON/OFF ratio to 102, but the device could not repeat the same hysteresis behavior. The analysis of the conduction and switching mechanisms in both devices revealed a conductive bridge mechanism attributed to the metalization of metal ions naturally found in milk. Overall, our findings show that the thickness of the milk film influences both conduction and switching mechanisms and that the (milk film)/ITO and (milk film)/W interfaces influence the conductance of full cream cow milk-based ReRAM devices.
14 March 2022 in Iranian Journal of Science and Technology, Transactions A: Science