Compaction simulators are frequently used in the formulation and process development of tablets, bringing about the advantages of flexibility, low material consumption, and high instrumentation to generate the most possible process understanding. However, their capability of resembling general aspects of rotary press compaction and their precision in simulating or mimicking sub-processes such as feeding and filling need to be systematically studied. The effect of material deformation behavior, blend composition, and feeding on tensile strength and simulation precision as compared with rotary presses of different scales is evaluated in this study. Generally, good simulation performance was found for the studied compaction simulator. Compaction profile-sensitivity was demonstrated for highly visco-plastic materials while shear-sensitivity in feeding was demonstrated for lubricated blends of ductile particles. Strategies for the compensation of both in compaction simulator experiments are presented by careful investigation of the compaction stress over time profiles and introduction of a compaction simulator-adapted shear number approach to account for differences in layout and operation mode between compaction simulator and rotary press, respectively. These approaches support the general aim of this study to provide a more straightforward determination of scaling process parameters between rotary press and compaction simulator and facilitate a quicker and more reliable process transfer.

Paddle feeders are devices commonly used in rotary tablet presses to facilitate constant and efficient die filling. Adversely, the shear stress applied by the rotating paddles is known to affect the bulk properties of the processed powder dependent on the residence time. This study focuses on the residence time distribution (RTD) of two commonly applied excipients (microcrystalline cellulose, MCC; dicalcium phosphate, DCP), which exhibit different flow properties inside rotary tablet presses. To realistically depict the powder flow inside rotary tablet presses, custom-made tracer powder was developed. The applied method was proven to be appropriate as the tracer and bulk powder showed comparable properties. The RTDs of both materials were examined in two differently scaled rotary tablet presses and the influence of process parameters was determined. To analyze RTDs independent of the mass flow, the normalized variance was used to quantify intermixing. Substantial differences between both materials and tablet presses were found. Broader RTDs were measured for the poorer flowing MCC as well as for the production scale press. The obtained results can be used to improve the general understanding of powder flow inside rotary tablet presses and amplify scale-up and continuous production process development.

Introduction: Tablets are commonly produced by internally adding particulate lubricants, which are known to possibly lower the mechanical strength of tablets. This reduction is caused by the coverage of matrix forming components by lubricant particles, resulting in decreased interparticulate interactions. The known incompatibilities with some active compounds of the predominantly used lubricant, magnesium stearate, call for the in-depth characterization of alternative lubricants. Purpose: Investigation of the dispersion behavior of five commonly applied pharmaceutical lubricants by mathematically modeling the dispersion kinetics for short and extended mixing times. Methods: The dispersion behavior of five different pharmaceutical lubricants were examined by systematically varying lubricant concentration and mixing time of binary formulations and evaluating the kinetic of tensile strength reduction by theoretically estimating the surface coverage based on particle sizes. Results: For short mixing times, a unifying relationship between compactibility reduction and theoretical surface coverage was identified. Subsequently, for extended mixing times, distinct differences in the shear strength and dispersion kinetics of the investigated lubricants were found. Conclusions: The lubricant particle size controls the tensile strength reduction if short mixing times are applied. For extended mixing times, the investigated lubricants can be divided into two groups in terms of dispersion kinetics. Possible underlying reasons are discussed in detail in order to enhance the general understanding of lubricant dispersions in tablet formulations.

The majority of tablets manufactured contain lubricants to reduce friction during ejection. However, especially for plastically deforming materials, e.g., microcrystalline cellulose (MCC), the internal addition of lubricants is known to reduce tablet tensile strength. This reduction is caused by the surface coverage by lubricant particles, the extent of which depends on both process and formulation parameters. Previously published models to predict the lubrication effect on mechanical strength do not account for changes in the excipient particle size. In this study, the impact of both lubricant concentration and mixing time on the tensile strength of tablets consisting of three different grades of MCC and four grades of magnesium stearate (MgSt) was evaluated. By taking into account the particle size of the applied excipients, a unifying relationship between the theoretically estimated surface coverage and compactibility reduction was identified. Evaluating the dispersion kinetics of MgSt as a function of time reveals a substantial impact of the initial surface coverage on the dispersion rate, while the minimal tensile strength was found to be comparable for the majority of formulations. In summary, the presented work extends the knowledge of lubricant dispersion and facilitates the reduction of necessary experiments during the development of new tablet formulations.