Solar thermal technologies are already available on the market, and they are robust and relatively cheap. Unfortunately, solar heat is seldom used in the industrial processes, and the main obstacle of solar heat diffusion is often the lack of adequate predictive modelling of solar plant integration that identifies its energy potential, economic feasibility, and environmental benefits. In this paper, we aim to investigate and evaluate the possibility of supplying solar heat to the pasta-drying process located in the northeast of the Italian Alps (“Felicetti”). The methodology proposed is structured with the combination of several software, namely, PVGIS^®, Matlab^®, Dymola^®. The methodology developed is tested, considering solar thermal energy as the primary source, in different geographical contexts.

The solar receiver is a critical component of concentrated solar power technology; it works as a heat exchanger, transforming the concentrated solar radiation into high-temperature heat. Volumetric receiver technologies, using air as a heat transfer fluid, are designed to reach higher temperatures than the current receiver technology, which is limited by material resistance and fluid instability. The higher temperature, up to 1200 K, could be used in high-temperature industrial processes or a high-temperature thermodynamic cycle. A correct radiation propagation is essential to develop their performances, reducing reflection and emission losses and promote the heat transfer to the fluid. In this study, the optical behaviour of a hierarchical volumetric receiver (HVR) developed in Bruno Kessler Foundation (FBK) has been studied using Monte Carlo ray tracing (MCRT) simulations. The simulations have been validated in an experimental setup that evaluates the light transmissivity of the HVR porous structure. Two different HVR structures are evaluated with MCRT simulations that use a real solar dish geometry to configure a complete concentrated solar power (CSP) plant. Results show that frontal and rear losses are, respectively, 12% and 3% of the incoming concentrated radiation. Inside the HVR, 15% of the incoming power is propagated trough the lateral void spaces. Therefore, the power spreading avoids the overconcentration of the centre of the focalized area. The HVR optical behaviour has been investigated, showing an optical efficiency of 85%.