Refractory humic substances (HSs), which include humic and fulvic acid as well as hydrophilic portion, are the prime pollutants of stabilized landfill leachate with a concentrated color and chemical oxygen demand (COD). Spectroscopic and microscopic analysis of humic acid remaining in stabilized leachate as a pollutant contributor were conducted in this study. Microfiltration and centrifugation processes were applied to fractionate the humic acid from the HSs of stabilized leachate. The three-stage isolation process recovered a maximum of 1412 ± 2.5 mg/L (Pulau Burung leachate), 1510 ± 1.5 mg/L (Alor Pongsu leachate) at pH 1.5 and 1371 ± 2.5 mg/L (PBLS), and 1451 ± 1.5 mg/L (APLS) of humic acid (about 42% of the total COD concentration) at pH 2.5, which eventually indicates the efficiency of the process. The spectroscopic analysis of isolated humic acid through scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR) significantly indicates the existence of identical elements in the recovered humic acid. The subsequent reduction (around 37%, 36%, and 39%) in ultra-violet absorbance values (UV254, UV280), COD, and color in the humic acid isolated leachate indicates the acid’s significant contribution as a toxic pollutant through aromaticity and conjugated double-bond compounds.
24 October 2025 in Asian Journal of Water, Environment and Pollution
Synthetic dyes and mordants are widely used in the textile industry, contributing significantly to environmental degradation. While natural substances offer environmental advantages, their application processes are often not well-documented. This study explores the potential of banana sap mordant and mahogany sawdust extract natural dye as an eco-friendly dyeing approach, with an emphasis on ecological sustainability. The effectiveness of these natural substances was analyzed against conventional chemical and synthetic agents by examining the color strength, reflectance, and fastness properties of polyester fabric. The aqueous extraction of natural mordant and dye from locally sourced banana stems and mahogany sawdust, a form of bio-waste, resulted in improved yields (20% and 25%, respectively), highlighting both the efficiency of the process and a reduction in waste volume. Fourier-transform infrared spectroscopy analysis confirmed the presence of identical peaks in the natural dye, indicating strong molecular bonding. Polyester fabric treated with the natural mordant demonstrated satisfactory color strength (Kubelka–Munk [K/S] value of 1.1) and reflectance (28), supporting these materials’ potential to mitigate the severe environmental impact associated with synthetic dye. In addition, the fabric displayed high rubbing and wash fastness ratings (4/5 and 5, respectively) as well as satisfactory bursting strength, indicating superior resistance to fading and adequate durability. Shade uniformity was verified through evenness, based on the Color Measurement Committee Delta E and K/S values across prominent areas of the test sample. All results were statistically significant (R2≥0.9).