Superheated steam temperature (SST) is a significant index for a coal-fired power plant. Its control is becoming more and more challenging for the reason that the control requirements are stricter and the load command changes extensively and frequently. To deal with the aforementioned challenges, previously the cascade control strategy was usually applied to the control of SST. However, its structure and tuning procedure are complex. To solve this problem, this paper proposes a single-loop control strategy for SST based on a hybrid active disturbance rejection control (ADRC). The stability and ability to reject the secondary disturbance are analyzed theoretically in order to perfect the theory of the hybrid ADRC. Then a tuning procedure is summarized for the hybrid ADRC by analyzing the influences of all parameters on control performance. Using the proposed tuning method, a simulation is carried out illustrating that the hybrid ADRC is able to improve the dynamic performance of SST with good robustness. Eventually, the hybrid ADRC is applied to the SST system of a power plant simulator. Experimental results indicate that the single-loop control strategy based on the hybrid ADRC has better control performance and simpler structure than cascade control strategies. The successful application of the proposed hybrid ADRC shows its promising prospect of field tests in future power industry with the increasing demand on integrating more renewables into the grid.

As a clean energy engine, the gas turbine is widely used for the generation of the power plant and the propulsion of the warship. Its control is becoming more and more challenging for the reason that internal coupling exists and the load command changes frequently and extensively. However, advanced controllers are difficult to implement on the distributed control system and conventional proportional–integral–derivative controllers are unable to handle with aforementioned challenges. To solve this problem, this article designs a decentralized active disturbance rejection control for the power and exhaust temperature of the gas turbine. Simulation results illustrate that the decentralized active disturbance rejection control is able to obtain satisfactory tracking and disturbance rejection performance with strong robustness. Eventually, a numerical simulation is carried out which shows advantages of active disturbance rejection control in the control of power and exhaust temperature when the gas turbine is under variable working condition. This successful application of decentralized active disturbance rejection control to the gas turbine indicates its promising prospect of field tests in future power industry with increasing demand on integrating more renewable energy into the grid.

This paper deals with the conflict between the input-output response and the disturbance-output response, which cannot be completely eliminated by traditional and advanced control strategies without using the accurate process model. The inherently close association of these two responses and the unavailability of the accurate process model pose a great challenge to field test engineers of a coal-fired power plant, that is, the design requirements of reference tracking and disturbance rejection are compromised. In this paper, a novel two-degree-of-freedom controller-feedforward compensated (FC) desired dynamic equational (DDE) proportional-integral-derivative (PID) (FC-DDE PID)-is proposed as a viable alternative. In addition to achieving independent reference tracking performance and disturbance rejection performance, its simple structure and tuning procedure are specifically appealing to practitioners. Simulations, experiments, and field tests demonstrate the advantages of the proposed controller in both reference tracking and disturbance rejection, thus making FC-DDE PID a convenient and effective controller for the control of the coal-fired power plants, readily implementable on the distributed control system (DCS).