Xingou Xu

Dr. Xingou Xu

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 August 2018 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
WLWenming Lin
Wenming Lin
XDXiaolong Dong
Xiaolong Dong
MPMarcos Portabella
Marcos Portabella
SLShuyan Lang
Shuyan Lang
YHYijun He
Yijun He
JLJianqiang Liu
Jianqiang Liu
The China-France Oceanography Satellite (CFOSAT) to be launched in October 2018 will carry two innovative payloads, i.e., the surface wave investigation and monitoring instrument and the rotating fan-beam scatterometer [CFOSAT scatterometer (CFOSCAT)]. Both instruments, operated in Ku-band microwave frequency, are dedicated to the measurement of sea surface wave spectra and wind vectors, respectively. This paper provides an overview of the system definition and characteristics of the CFOSCAT instrument. A prelaunch analysis is carried out to estimate the scatterometer backscatter and wind quality based on the developed CFOSCAT simulator prototype. The overall simulation includes two parts: first, a forward model is developed to simulate the ocean backscatter signals, accounting for both instrument and geophysical noise. Second, a wind inversion processor is used to retrieve wind vectors from the outputs of the forward model. The benefits and challenges of the novel observing geometries are addressed in terms of the CFOSCAT wind retrieval. The simulations show that the backscatter accuracy and the retrieved wind quality of CFOSCAT are quite promising and meet the CFOSAT mission requirements.

26 November 2019 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
XXXingou Xu
Xingou Xu
ASAd Stoffelen
Ad Stoffelen
Spaceborne scatterometers for ocean surface winds usually operate in Ku- or C-band. Rather strict quality control (QC) procedures are included in the Ku-band wind retrieval chain for labeling rain-contaminated observations. Existing QC factors represent the deviation of measurements from the wind geophysical model function (GMF) modeled measurement surface. Other QC indicators flag outliers by examining neighborhood consistency. In this article, spatial heterogeneity of rain is further exploited by a new indicator for Ku-band QC, namely, JOSS, the speed component of the observation cost function, JO, of the selected solution (JOS) in the 2-D variational ambiguity removal (2-DVAR) step of the wind retrieval. First, the characteristics of 2-DVAR speeds in rainy condition are analyzed, and then, the ability of JOSS in quality labeling is proposed and verified by applying it to the Ku-band scatterometer on-board ScatSat. Its effectiveness for rain screening is confirmed with collocated references from the C-band scatterometer on-board the MetOp-B satellite, which are much less affected by rain. With reference to collocated rain rates from the Global Precipitation Mission (GPM), the more direct relations to rain and wind speed errors of the newly proposed QC indicator JOSS than existing QC indicators, including JOS, are illustrated by the analysis of its correlation with rain rates. In a novel approach, JOSS is applied to accept (unflag) more than 75% of the data rejected by the widely applied maximum likelihood estimation (MLE) thresholds (i.e., correct false alarms) in the tropics. The promising results open a new opportunity for improving QC of rain in the Ku-band wind scatterometry benefitting scatterometer applications.

12 October 2018 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Verified
Journal Article
Closed access
XXXingou Xu
Xingou Xu
XDXiaolong Dong
Xiaolong Dong
DZDi Zhu
Di Zhu
SLShuyan Lang
Shuyan Lang
Conventional scatterometer wind retrieval has been proved effective for low and moderate wind conditions. Under high wind conditions, especially for typhoons, the air-sea interactions are fierce, and usually the sea surface backscattering is complicated by rain, leading to degraded scatterometer wind quality. Under such circumstances, radiometers in different frequencies can provide information of rains and the complex air-sea interface. In this paper, an artificial neural network (ANN) was employed to combine the observations of the two sensors onboard HY-2A satellite: radiometer and scatterometer (HSCAT) to achieve wind field retrieving under typhoon conditions. The ANN was trained by using global/regional assimilation and prediction system (GRAPES) wind field data as true values. The established network is then verified by an independent dataset excluded from the training data. It is shown that the wind speeds and directions retrieved from the ANN are better than those of the operational HSCAT products as compared to GRAPES winds. Further comparison with the H*Wind product proves that the proposed ANN is effective in terms of high wind field retrieval. The research of this paper provides a nice reference for the typhoon wind retrieval from the HY-2A satellite and for the data processing of the coming HY-2 satellite series.

18 May 2020 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Verified
Journal Article
Open access
XXXingou Xu
Xingou Xu
ASAd Stoffelen
Ad Stoffelen
JMJan Fokke Meirink
Jan Fokke Meirink
Ocean surface rain rate information is crucial for quality control (QC) research in wind scatterometry. High-quality precipitation retrievals from passive microwave instruments are available from the Global Precipitation Mission (GPM). In addition, rain rates can be estimated with high spatio-temporal resolution from geostationary passive visible-infrared imagers such as the Spinning Enhanced Visible and Infrared Imager (SEVIRI) onboard the Meteosat Second Generation (MSG) satellites. The two products are complementary in observing time and regions. We compare them at different spatial scales, and show that the best consistency is obtained for grids with a size of 25 km or larger; where 25 km corresponds to a common scatterometer wind vector cell size. The results show that correlation coefficient (CC) of rain rates from GPM and MSG products for rain rates less than 5 mm/h is about 0.2 and ranges from 0.2 to about 0.5 for rain rates higher than 5 mm/h, while bias and Root Mean Square Deviation (RMSD) fluctuate about 2 mm/h and 3 mm/h respectively. Also, QC indicator performances are analyzed with references to MSG and GPM rain rates respectively for tropical regions. References to these QC indicators further indicate better consistency with both products at rain rates higher than 5 mm/h. The effectiveness of a newly proposed QC indicator has been confirmed as well. The three-way comparison of rain products and scatterometer QC indicators provides a reliable reference for research and for the application of corrections for rain effects on scatterometers.

30 November 2021 in Atmospheric Measurement Techniques
Verified
Journal Article
Open access
PDF file
XXXingou Xu
Xingou Xu
ASAd Stoffelen
Ad Stoffelen
Wind retrieval parameters, i.e. quality indicators and the two-dimensional variational ambiguity removal (2DVAR) analysis speeds, are explored with the aim to improve wind speed retrieval during rain for tropical regions. We apply the well-researched support vector machine (SVM) method in machine learning (ML) to solve this complex problem in a data-oriented regression. To guarantee the effectiveness of SVM, the inputs are extensively analysed to evaluate their appropriateness for this problem, before the results are produced. The comparisons between distributions and differences between data of rain-contaminated winds, corrected winds and good quality C-band winds illustrate that the rain-distorted wind distributions become more nominal with SVM, hence much reducing the rain-induced biases and error variance. Further confirmation is obtained from a case with synchronous Himawari-8 observation indicating rain (clouds) in the scene. Furthermore, the estimation of simultaneous rain rate is attempted with some success to retrieve both wind and rain. Although additional observations or higher resolution may be required to better assess the accuracy of the wind and rain retrievals, the ML results demonstrate benefits of such methodology in geophysical retrieval and nowcasting applications.

9 April 2020 in Remote Sensing
Verified
Journal Article
Open access
PDF file
XXXingou Xu
Xingou Xu
XDXiaolong Dong
Xiaolong Dong
YXYu Xie
Yu Xie
Real-time (RT) ocean surface wind can make key improvements to disaster alarmingand safety of maritime navigation to avoid loss in property and human lives. Wind scatterometry is a well-acquainted way of obtaining good quality ocean surface winds, and it has been in application for decades. Existing wind-obtaining chains employ ground stations for receiving observations and can, at best, provide products in around 30 minutes for limited regions. In recent years, a satellite information-obtaining and transmission network is the new trend of Earth observation. In this research, on-board wind retrieval environment and procedures, which are different from traditional wind-obtaining chains, are proposed. First, the establishment of the on-board environment is instructed. Structures of each module are provided. The ground simulation system is been established based on this. After that, existing observing and processing routines of wind scatterometry are described, and then an on-board processing chain proposed and described. Modifications to existing satellite-ground chains are highlighted. The proposed method is validated in Level 0 data from the Chinese–French Oceanic SATellite (CFOSAT). Experiments indicate that the proposed on-board processing procedure can provide comparable results to ground-processed wind products. The root-mean-square error (RMSE) of wind speed for a track of data used in the experiment was about 0.26 m/s, and it was about 0.8° for wind direction. By decreasing wind field result quality, calculation time can be lessened in the on-board environment. However, it is found that in the whole chain of on-board wind generation, the most time-consuming procedure is observation-obtaining. The proposed on-board processing method can achieve good wind accuracy while meeting RT applications with good processing time. This provides a good complement to existing on-board-observing-ground-processing chains for RT applications.