A comparative study between Nitrogen (N2) and Argon (Ar) plasma is carried out to investigate its effect on surface morphology, hydrophilicity, permeate flux and ageing of cellulose nitrate polymeric membranes in the present work. Langmuir probe and Optical Emission Spectroscopy are used to characterize the plasma. The SEM analysis reveals the noticeable macro-void creations and pore enlargement for both N2 and Ar plasma. The AFM analysis shows a higher surface roughness for Ar plasma treatment as compared to N2 plasma treatment. XPS analysis confirms the changes in the polymer matrix along with the incorporation of various functional groups on the membrane surface as a result of the plasma treatment. A better hydrophilic nature with prolonged plasma treatment is observed for Ar plasma as compared to N2 plasma treatment. The present results show a higher permeate flux with a high rejection rate for Ar plasma treatment in comparison to N2 plasma, which might be due to the pore size and pore area enlargement of the membrane. The hydrophobic recovery for both the plasma-treated membranes is found significant for the initial ageing period of 7 days and found almost stable in nature after 7 days. A diffusion-based theoretical model is developed to study the hydrophobic recovery of plasma-treated membranes. A strong alignment between experimental and theoretical results is observed in the present work. The Cake Filtration model, derived from the Hermia model, is identified as the most suitable model for describing the fouling mechanisms for the present work.
Appearance of Taylor bubble is ubiquitous in two-phase fluid flow through millimeter-sized tubes. Precise control over bubble generation and stability in those tubes are instrumental in unit processes in fine chemical industries. In this article, we systematically study the role of wall surface wettability in the structure and dynamics of the gaseous bubble flowing through water across milli-tubes. Specifically, from imaging experiments, we find that in a non-wettable milli-tube, the bubble loses its axial symmetry to reduce contact of the liquid phase with the tube wall. Moreover, we observe that the bubble speed is significantly higher in hydrophobic-coated tubes in comparison to the tubes without coating. Computational simulation balancing the viscous, gravitational, and surface forces recovers the observed effect of surface wettability on bubble shape and velocity. Finally, we establish the observed quantitative correlation between the bubble velocity and the surface wettability using an analytical model. Altogether, integrating experiments, numerical simulation, and theoretical analysis, we demonstrated the significant influence of wall-surface wettability in the shape and velocity of the Taylor bubble through milli-tubes.