An active vibration control system to monitor and suppress the human forearm tremor is proposed in this article. The forearm is modelled as a uniform flexible continuous beam supported by a pin joint and a rotational spring at one end, whereas the other end is free. The beam is covered with a layer of piezoelectric sensor on its top surface and a layer of piezoelectric actuator on its bottom surface to form a control system, through which a closed-loop active control paradigm is implemented for tremor suppression. The governing equation of motion is derived using the Hamilton principle as well as the Galerkin procedure, leading to a second-order ordinary differential equation in time. The vibration response of the structure to an external harmonic excitation, analogous to tremor, is obtained analytically, enabling parametric study of the control system for tremor reduction. Using the obtained analytical expression, the effects of various parameters such as the control gain, the piezoelectric coefficient and the dielectric constant on the vibration response are studied. The results indicated that the proposed active vibration control system is an effective tool for active vibration control. Increasing the control gain of the control system as well as the magnitude of the piezoelectric constant decreased the amplitude of vibration, whereas the dielectric constant of the piezoelectric material did not show to have a significant effect on the beam vibration. The obtained results will pave the way for further experimental exploration to take and fabricate the most appropriate piezoelectric material and to design an effective active vibration control system for tremor suppression in people with Parkinson’s disease.
This paper presents the identification of both location and magnitude of impact forces applied on different positions of a multi-storey tower structure using different types of transducers, i.e., an accelerometer, a laser Doppler vibrometer, and a triangulation displacement sensor. Herein, a model-based inverse method is exploited to reconstruct unknown impact forces based on various recorded dynamic signals. Furthermore, the superposition approach is employed to identify the impact location. Therein, it is assumed that several impact forces are applied simultaneously on potential locations of the multi-storey tower structure, while only one impact has non-zero magnitude. The purpose is then to detect the location of that non-zero impact. The influence of using different hammer tip materials for establishing the transfer function is investigated, where it is concluded that the hammer with a harder tip leads to a more accurate transfer function. An accuracy error function is proposed to evaluate the reconstruction precision. Moreover, the effect of sensor type and location on the accuracy of the reconstruction is studied, where it is shown that the proximity between the impact and sensor locations is a dominant factor in impact force reconstruction. In addition, the efficacy of using different transducers is studied for the impact localization, where it is demonstrated that reducing the degree of under-determinacy by using a combination of system responses of the same type can improve the localization accuracy.
2 January 2025 in International Journal of Mechanical Sciences