Achieving accurate navigation and localization is crucial for Autonomous Underwater Vehicle (AUV). Traditional navigation algorithms, such as Extended Kalman Filter (EKF) and Unscented Kalman Filter (UKF), require the system model and measurement model for state estimation to obtain the AUV position. However, this may introduce modeling errors and state estimation errors which will affect the final precision of AUV navigation system to a certain extent. To avoid these problems, in this paper, we proposed a deep framework—NavNet—by taking AUV navigation as a deep sequential learning problem. Firstly, the proposed NavNet can take raw sensor data at different frequencies as input, which benefits from the sequential learning capability of Recurrent Neural Network (RNN). Secondly, NavNet takes advantage of a simplified attention mechanism and Fully Connected (FC) layers to output AUV displacements per unit time, which accomplishes low-frequency AUV navigation by accumulation of it. More importantly, there is no need for the model building and state estimation with NavNet, which avoids the import of relevant errors. We compare the performance of NavNet to EKF and UKF using collected data by running Sailfish in the sea. Experimental results show that NavNet has an excellent performance in terms of both the navigation accuracy and fault tolerance. In addition, a reliable fusion strategy of NavNet and conventional method is applied to achieve high-frequency AUV navigation. The experimental results show that the proposed architecture can be a reliable supplement to limit the error growth of conventional algorithms.
The control issue of Autonomous Underwater Vehicles (AUV) is very challenging since the precise mathematical model of AUV is hard to establish due to its strong coupling and time-varying features. Meanwhile, AUV movement is easily interfered with by ocean currents and waves, causing anti-interference performance of traditional Proportional-Integral-Derivative (PID) control to be unsatisfactory. Aiming to solve those problems, an algorithm of fuzzy optimized model-free adaptive control (MFAC) based on auto-disturbance rejection control (ADRC) was proposed and used in AUV heading control. The MFAC is used to overcome the difficulty with establishing a precise mathematical model, and the ADRC is introduced to handle the interference of currents and waves. In this paper, MFAC and ADRC are combined. First, the MFAC is performed based only on the I/O data of the controlled object, which is simple to implement with low calculation complexity and strong robustness. Then, a tracking differentiator (TD) is employed to track the input signal to overcome the antinomy of rapidity and hypertonicity in MFAC. After that, an extended-state observer (ESO) is added to control the variables of MFAC to estimate all the disturbances, which can greatly improve the anti-interference ability of the system. Due to the complexity and diversity of the marine environment, a fuzzy optimized MFAC based on ADRC is proposed to improve the adaptability of AUV to the marine environment. Simulations and experiments were carried out to verify the control effect of this algorithm in complex sea conditions.
2 November 2020 in IEEE Transactions on Instrumentation and Measurement
This paper presents an effective cruise speed estimation strategy for low-cost autonomous underwater vehicle under the impact of complex ocean currents and the absence of critical navigation sensors. The estimation strategy is based on the motor feedback information, including motor current and propeller speed. The cruise speed estimation strategy requires a rough speed estimation and minor adjustments to ensure that the estimated speed is valuable. In this paper, the multiple fuzzy logic is applied to generate the mapping between the motor current deviation, propeller speed and cruise speed deviation. Afterwards, recursive least square is introduced to fine-tune the rough speed based on the reference propeller torque estimated by extended state observer. The experimental results demonstrate that the estimated speed of the proposed method can reach, on average, 96% of the Doppler velocity log measurement accuracy under the ocean currents conditions. The experimental results also illustrate that the method proposed in this paper has strong robustness.
Precise navigation is essential for autonomous underwater vehicles (AUVs). The measurement deviation of the navigation sensors, especially the microelectromechanical systems (MEMS) sensors, is a crucial factor that affects the localization accuracy. Deep learning is a novel method to solve this problem. However, the calculation cycle and robustness of the deep learning method may be insufficient in practical application. This paper proposes an adaptive navigation algorithm with deep learning to address these questions and realize accurate navigation. Firstly, this algorithm uses deep learning to generate low-frequency position information to correct the error accumulation of the navigation system. Secondly, the χ2 rule is selected to judge if the Doppler velocity log (DVL) measurement fails, which could avoid interference from DVL outliers. Thirdly, the adaptive filter, based on the variational Bayesian (VB) method, is employed to estimate the navigation information simultaneous with the measurement covariance, improving navigation accuracy even more. The experimental results, based on AUV field data, show that the proposed algorithm could realize robust navigation performance and significantly improve position accuracy.
The autonomous underwater vehicle (AUV) is mainly used in the development and exploration of the ocean. As an important module of the AUV, the actuator plays an important role in the normal execution of the AUV. Therefore, the fault diagnosis of the actuator is particularly important. At present, the research on the strong faults, such as the winding of the actuator, has achieved good results, but the research on the weak fault diagnosis is relatively rare. In this paper, the tri-stable stochastic resonance model is analyzed, and the ant colony tri-stable stochastic resonance model is used to diagnose the weak fault. The system accurately diagnoses the fault of the actuator collision and verifies the adaptive tri-stable stochastic resonance system. This model has better diagnostic results than the bi-stable stochastic resonance system.