In this study, wood plastic composites (WPC) made of poly(lactic acid) PLA and a bark-filler were manufactured. Two degrees of bark comminution (10–35 mesh and over 35 mesh) and varied content of bark (40, 50 and 60%) were investigated. The studied panels were compared with analogically manufactured HDPE boards. The manufacture of composites involved two stages: at first, WPC granules with the appropriate formulation were produced using the extruder (temperatures in individual extruder sections were 170–180 °C) and crushing using a hammer mill after cooling the extruded composite; secondly, the obtained granulate was used to produce boards with nominal dimensions of 300 × 300 × 2.5 mm3 by flat pressing in a mold, using a single daylight press at a temperature 200 °C. The study proved that comminuted bark can be applied as a filler in PLA composites. However, an increase in bark content decreased mechanical properties (MOR, MOE) and deteriorated humidity resistance (high TS and WA) of the panels. Along with the increase in bark content, an increase in the contact angle of the composite surfaces and a decrease in the total surface energy were noted. It was also found that PLA composites have higher strength parameters and lower moisture resistance compared to HDPE composites with the same bark content.Graphical abstract

Due to the content of lignocellulosic particles, wood plastic composites (WPC) composites can be attacked by both domestic and mold fungi. Household fungi reduce the mechanical properties of composites, while mold fungi reduce the aesthetics of products by changing their color and surface decomposition of the wood substance. As part of this study, the impact of lignocellulosic fillers in the form of sawdust and bark in poly (lactic acid) (PLA)-based biocomposites on their susceptibility to mold growth was determined. The evaluation of the samples fouled with mold fungi was performed by computer analysis of the image. For comparison, tests were carried out on analogous high-density polyethylene (HDPE) composites. Three levels of composites’ filling were used with two degrees of comminution of lignocellulosic fillers and the addition of bonding aids to selected variants. The composites were produced in two stages employing extrusion and flat pressing. The research revealed that PLA composites were characterized by a higher fouling rate by Aspergillus niger Tiegh fungi compared to HDPE composites. In the case of HDPE composites. The type of filler (bark, sawdust) affected this process much more in the case of HDPE composites than for PLA composites. In addition, the use of filler with smaller particles enhanced the fouling process.

Leafy vegetables are a daily part of the human diet all over the world. At the same time, a worldwide problem of Se malnutrition is present in human populations, mostly due to low soil Se contents. As plants represent the main source of this element in the human diet, with Se being an essential trace element for humans and animals, plant foods containing Se can be used as an efficient means of increasing the Se in the human diet, as well as in animal feed (biofortification). At the same time, the production of growing media relies on limited peat reserves. The use of earthworms facilitates the production of composted organic masses mostly consisting of organic waste, called vermicompost. The aim of this study was to investigate the influence of three different growing media (commercial peat media, vermicompost, and a 1:1 mixture) on Se biofortification’s efficacy and yield in lamb’s lettuce. The Se biofortification was performed with sodium selenate (Na₂SeO₄). It was shown that biofortification increased the Se contents such that a mass of only 48.9 g of fresh leaves contained enough Se for the recommended daily intake in human nutrition (55 µg Se/day), which represents a significant potential for solving Se malnutrition. Furthermore, the use of a 1:1 vermicompost–commercial substrate mixture showed a similar performance to the peat growing medium, contributing to the preservation of peat reserves.

The depletion of natural resources such as freshwater and cropland makes it necessary to find a new solution for sustainable food production. Aquaponic systems seem to be a great alternative to traditional agriculture, however, there are still many unknowns that need to be explored. It is already known how fish stocking affects water quality in aquaponic systems, but not how it affects the plants’ growth, and especially on chlorophyll fluorescence. In this study, we examined how the density of 0, 2, 4, 8, and 16 stocking fish in five aquaria affects lettuce growth. The first tank was only a hydroponic system with plants but without fish (control). In the remaining four aquaria – 2, 4, 8 and 12 specimens of common carp fry with an average weight of 20 grams (average 8.5–33.2 g) were placed in the aquaponic growing system. Physicochemical analysis of water was conducted to determine the levels of pH, electrical conductivity ( EC), N-NO 3, N-NO 2, N-NH 4, P-PO 4, O 2 and physiological parameters of plants (nitrogen balance index – NBI, chlorophyll content index – CCI, quantum yield – QY, flavonoid content – Flv) were analysed. The results showed that fish stocking density has different effects on plant physiological parameters, but in most cases, was insignificant. It seems that the greater number of fishes and higher density indirectly causes growth inhibition (lower photosynthetic efficiency) due to the increase of N-NO 3 and a decrease of O 2 in the water.

Given the significant expansion of alien predator species that may negatively affect native animal species, especially waterbirds, this study undertook an analysis of the occurrence of American mink (Neogale vison), raccoon dog (Nyctereutes procyonoides) and raccoon (Procyon lotor) in the Natura 2000 – Wełtyńskie Lakes area of 2811.2 ha, and an assessment of the impact of these animals on the occurrence of the greylag goose (Anas anser). A camera trapping inventory for the three non-native carnivore species was carried out from April to September 2022, parallel to the inventory of the greylag goose. Results confirmed the presence of all three non-native species in the analyzed area. Among the species, raccoons were characterized by the highest population size, density rate and reproductive success. At the same time, a declining population of the greylag goose was found compared to the previous breeding season. This population achieved low breeding success.

Influence of Tytanit® and EM on biochemical, physiological, and qualitative parameters of common bean | Alicja Auriga, Jacek Wróbel | Agricultural Journals