Pari Island has 1,441 inhabitants who are facing major environmental challenges related to water consumption and availability. These challenges may impact water quality and availability in the future. Previous research examining water usage and sanitation behavior on Pari Island remains limited. Since domestic activities dominate in Pari Island, this study evaluated water sources for domestic usage, estimated water consumption, and evaluated sanitation behavior, as well as community behavior and awareness. This study was based on a field survey using a questionnaire involving 317 heads of household, and had focus group discussions. The results revealed that reverse osmosis (RO) water and branded bottled water were the dominant water sources for drinking and food preparation, and RO water had become an important alternative water source for its affordable price. An individual's well water was mostly used for bathing and toilets. Annual water consumption on Pari Island for drinking, food preparation, and water-related sanitation is 24,930.74–29,401.44 m3/year, which still fell within the estimated water capacity of 290,000.48 m3/year, yet problems related to sanitation need special attention with respect to the increasing population. The awareness of the Pari Island community on technological interventions should be an advantage to maintain water sustainability.
1 March 2017 in IOP Conference Series: Earth and Environmental Science
In medium capacity, electroplating industry usually treats wastewater until 5 m 3 per day. Heavy metal content becomes concern that should be reduced. Previous studies performed electrocoagulation method on laboratory scale, either batch or continuous. This study was aimed to compare the influence of voltage input variation into heavy metal removal in electroplating wastewater treatment using electrocoagulation process on laboratory-scale in order to determine the optimum condition for scaling up the reactor into pilot-scale. The laboratory study was performed in 1.5 L glass reactor in batch system using wastewater from electroplating industry, the voltage input varied at 20, 30 and 40 volt. The electrode consisted of aluminium 32 cm 2 as sacrifice anode and copper 32 cm 2 as cathode. During 120 min electrocoagulation process, the pH value was measured using pH meter, whereas the heavy metal of chromium, copper, iron, and zinc concentration were analysed using Atomic Absorption Spectrophotometer (AAS). Result showed that removal of heavy metals from wastewater increased due to the increasing of voltage input. Different initial concentration of heavy metals on wastewater, resulted the different detention time. At pilot-scale reactor with 30 V voltage input, chromium, iron, and zinc reached removal efficiency until 89-98%, when copper reached 79% efficiency. At 40V, removal efficiencies increased on same detention time, i.e. chromium, iron, and zinc reached 89-99%, whereas copper reached 85%. These removal efficiencies have complied the government standard except for copper that had higher initial concentration in wastewater. Kinetic rate also calculated in this study as the basic factor for scaling up the process.
10 February 2025 in Chemical Engineering Research and Design