The Nickel ferrite (NiFe2O4) nanoparticle size was successfully prepared using the sol-gel method, while, the conducting polymer (PANI-PTSA) the chemical oxidative method was used. The nanocomposite {NiFe2O4/PANI-PTSA} is an excellent shielding material that reduces the cross-sectional area by absorbing radar waves at X-band, then offers protection from risky microwave radiation. The specimens NF, PNF1, PNF2 and PNF3 were characterised using some techniques, for instance, X-ray diffraction (XRD), Fourier transforms infrared (FTIR) and vector network analyser (VNA). Results showed that the specimen PNF3, which mixed by ratio (3:1) and 2.1 mm thickness, got better reflection loss (R.L); { – 19.5, – 25.19, – 59.08} dB, at frequency band {8.3, 9.5, 10.7} GHz, respectively, while the power absorption was (99 %), (>99.68%), (99.99 %) in that order. Here the nanocomposite {NiFe2O4/PANI-PTSA} adds new outcomes to the electromagnetic interference (EMI) for shielding and microwave absorption in various advanced military applications at frequency band (8–12 GHz).
0.05) were detected between Intensity and vary-ing time at 5, 10, 20, 30 sec. Conclusions: The intensity of the curing light was strongly affected by the angles and distance. The decrease in light intensity was significant (p< 0.05) when the light tip placed at an angle 70 and a way to the aperture of the a curing radiometer, but the magnitude of the intensity it becomes more with the same procedure when the angle was perpendicular 900. The decrease in the light intensity of the light curing units, agree with the inverse square law for the distances 0 to 16 mm. The study found that there was no significant difference (p> 0.05) in light intensity between the light curing tip and a curing radiometer varying with time. This study notice that the intensity of the light cure type LED is less than QTH(Quartz Tungsten Halogen).]]>