Ebenezer Essel

Dr. Ebenezer Essel

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 April 2021 in Journal of Fluid Mechanics
Verified
Journal Article
Closed access
PDF file
EEEbenezer Essel
Ebenezer Essel
MTMark F. Tachie
Mark F. Tachie
RBRam Balachandar
Ram Balachandar
The unsteady flow separation and wake dynamics around finite wall-mounted circular cylinders fully immersed in a turbulent boundary layer (TBL) are investigated experimentally using a time-resolved particle image velocimetry (TR-PIV) system. The cylinder aspect ratios (h/d = 0.7–7.0, where h and d are the height and diameter of the cylinder, respectively) and the relative boundary layer thickness (δ/d = 8.7, where δ is the boundary layer thickness) were chosen to systematically investigate the effects of submergence ratio (δ/h = 1.2–12.4) using δ/h values much larger than that reported in the literature. With δ/h > 1.0, the cylinders encountered elevated turbulence levels (4%–10 %), reduced mean velocity and strong mean shear in the approach TBL which had profound effects on the attachment length and flapping motion of the reverse-flow region on the top surface of the cylinders. The time-averaged statistics including the mean velocities, Reynolds stresses and production terms were used to characterize the flow field and the large-scale anisotropy. The results showed that the wake structure of the submerged cylinders can be divided into dipoles and quadruples with a critical h/d = 3.5 and δ/h = 2.5. Both categories exhibited strong anisotropy, but the quadruples showed an interesting pattern where the streamwise Reynolds normal stress is less than the other components due to negative production in the wake region. Spectral analysis and joint-probability density functions are used to show that the reverse-flow region behind the cylinder is characterized by low-frequency flapping motions with a Strouhal number that decreases with increasing aspect ratio. The spatio-temporal evolution of the vortices also revealed the occurrence of cellular shedding behaviour where the vortices near the free end are shed discretely while those in the lower span are shed in the form of long streaky structures.

1 January 2022 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
MKM. Kim
M. Kim
EEEbenezer Essel
Ebenezer Essel
PSPierre Sullivan
Pierre Sullivan
An experimental investigation on the effects of the synthetic jet actuator (SJA) was conducted on a National Advisory Committee for Aeronautics 0025 airfoil in a low-speed recirculating wind tunnel at a chord Reynolds number of 100 000 and at an angle of attack 12°. Particle image velocimetry was used to visualize the flow separation for the uncontrolled baseline flow, and the flow attachment for the SJA controlled flows. The location of the SJA was at −1.3% from the separation point, and a blowing ratio of 0.8 was chosen for this study. The blowing ratio proved to be effective in suppressing the separation of the flow. The reduced frequency (Ste ) was varied between 1, 2, 14, and 58. The momentum bursts from the SJA based on the reduced frequency determined the effectiveness of the control method. The Reynolds stresses and turbulence production decreased dramatically with increasing frequency up to the shear layer frequency (Ste = 14), but further excitation (Ste = 58) resulted in a regain of turbulence levels. Proper orthogonal decomposition was performed which showed that the low frequency operations globally affect the modes in the shear layer while the high frequency operations are confined to the airfoil surface.

1 July 2022 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
HHHoward Haonan Ho
Howard Haonan Ho
EEEbenezer Essel
Ebenezer Essel
PSPierre Sullivan
Pierre Sullivan
The three-dimensional flow of a circular synthetic jet interacting with a turbulent crossflow is investigated with unsteady Reynold-Averaged Navier–Stokes simulations. The effects of jet momentum are examined using three blowing ratios (CB=0.32, 0.67, and 1.10 ) at constant actuation frequency (f=300 Hz ), approach crossflow Reynolds number, Reθ=900 , and boundary layer thickness, δ/d=7.25 , where d is the jet diameter. The results showed that the expelled jet is accompanied by a reverse flow region on the downstream side which undergoes alternating expansion and contraction during the jet cycle. The size of the reverse flow region and depth of penetration increased with increasing jet momentum. For the low momentum jet, the expelled flow structure evolved into a hairpin vortex which significantly enhanced the wall shear stress in the spanwise direction and near the jet exit. The higher momentum jets, on the other hand, exhibited strong vortex loops around the expelled jet column that transitioned into trailing vortex pairs and a tilted vortex ring further downstream. Along the wall, both horseshoe vortex upstream of the jet exit and tertiary vortices downstream were found attached to the wall. The strong tertiary vortices promoted downwash of fluids which significantly enhanced the wall shear stress along the symmetry plane for the medium and high momentum jets. The impact of the tertiary vortices increased with the jet momentum, offering greater potential for flow separation control.

6 December 2024 in Fluids
Verified
Journal Article
Open access
PDF file
HHHoward Haonan Ho
Howard Haonan Ho
ASAli Shirinzad
Ali Shirinzad
EEEbenezer Essel
Ebenezer Essel
PSPierre Sullivan
Pierre Sullivan
A synthetic jet actuator (SJA) is a fluidic device often consisting of a vibrating diaphragm that alters the volume of a cavity to produce a synthesized jet through an orifice. The cyclic ingestion and expulsion of the working fluid leads to a zero-net mass-flux and the transfer of linear momentum to the working fluid over an actuation cycle, leaving a train of vortex structures propagating away from the orifice. SJAs are a promising technology for flow control applications due to their unique features, such as no external fluid supply or ducting requirements, short response time, low weight, and compactness. Hence, they have been the focus of many research studies over the past few decades. Despite these advantages, implementing an effective control scheme using SJAs is quite challenging due to the large parameter space involving several geometrical and operational variables. This article aims to explain the working mechanism of SJAs and provide a comprehensive review of the effects of SJA design parameters in quiescent conditions and cross-flow.

26 March 2021 in Physical Review Fluids
Verified
Journal Article
Closed access
PDF file
NKNam Kang
Nam Kang
EEEbenezer Essel
Ebenezer Essel
VRVesselina Roussinova
Vesselina Roussinova
Ram BalachandarRam Balachandar
Ram Balachandar
This paper investigates the effects of approach flow conditions on the unsteady three-dimensional wake characteristics of a square-back Ahmed body using improved delayed detached eddy simulations. Two approach flow conditions were investigated: a reference uniform flow (case A) and a thick turbulent boundary layer (TBL) (case B), where the Ahmed body is fully submerged in the TBL, δ>H, where δ is the boundary layer thickness and H is the total height of the body from the ground. Case A is studied extensively in the literature, whereas case B is less studied. The present results showed that the wake structure of case B is significantly different from that of case A. In particular, the wake of case A is dominated by a strong downwash flow from the top surface, but case B exhibits a much stronger upwash flow, which is induced by lower momentum of the fluid that emanates from the ground clearance and the pressure imbalance generated behind the body. For case A, conditional averaging of the flow field based on the sign of the drift force demonstrated the occurrence of the well-known wake switching (bimodality) event in the spanwise direction. However, the bimodality was completely suppressed in the wake of the Ahmed body submerged in the TBL. Both time-averaged turbulence statistics such as the Reynolds stresses and production terms, and time-resolved statistics including spectral analysis and temporal cross correlations are used to explore the differences between the wake structure of the Ahmed body in a uniform flow and thick TBL.

6 January 2023 in Journal of Fluid Mechanics
Verified
Journal Article
Open access
PDF file
EEEbenezer Essel
Ebenezer Essel
Ram BalachandarRam Balachandar
Ram Balachandar
MTMark F. Tachie
Mark F. Tachie
The unsteady wake dynamics of two finite wall-mounted cylinders of unequal height and arranged in tandem are investigated using time-resolved particle image velocimetry (TR-PIV). The cylinders were fully submerged in a turbulent boundary layer with a Reynolds number based on the cylinder diameter (d) of 5540 and boundary layer thickness of $\delta /d = 8.7$ . The centre-to-centre spacing between the cylinders was fixed at 4d. The degree of sheltering was studied by varying the height of the upstream cylinder (UC) $(h/d \in [0.7\unicode{x2013} 7.0])$ while keeping the height of the downstream cylinder (DC) constant at $H/d\; = \; 7.0$ . The resulting height ratios were $h/H = 0.10,0.25,0.50,0.75$ and $1.00$ denoted as HR10, HR25, HR50, HR75 and HR100, respectively. The wake dynamics of the DC were also compared to those of an isolated single cylinder (SC) with similar Reynolds number, aspect ratio and submergence ratio. TR-PIV measurements were performed in the symmetry plane for all test cases and five spanwise planes along the height of HR75. The results showed that as the height ratio increases, the downwash from the free end of the UC impinges directly on the frontal surface of the DC and induces a strong upwash on the opposite rear side of the DC. The induced upwash impedes the downwash from the free end of the DC much earlier than observed behind the SC, resulting in a reduced reverse flow area and high velocity deficit in the sheltered portion of the DC. Nonetheless, the reverse flow area behind the UC and DC undergoes a quasi-periodic pumping motion with frequencies that are synchronized for HR25 to HR100. Spectral analysis and proper orthogonal decomposition also reveal that the attachment of the shear layers of the UC on the DC also promotes a lock-in anti-symmetric vortex shedding behaviour.