We have demonstrated the synthesis of γ-Fe₂O₃ nano-particles through a facile and novel calcination process in the air. There is no pH regulation, gas atmosphere, additive, centrifugation or other complicated procedures during the preparing process. A detailed formation process of the nano-particles is proposed and DMF as a polar solvent may slower the reaction process of calcination. The structures, morphologies and magnetic properties of γ-Fe₂O₃ nano-particles were investigated systematically and the pure γ-Fe₂O₃ nano-particles obtained at 200 °C display uniform morphology good magnetic property. The saturation magnetization of obtained pure γ-Fe₂O₃ is about 74 emu/g, which is comparable with bulk material (76 emu/g) and larger than other results. In addition, the photocatalytic activity for degradation of methylene blue is also studied, which shows proper photocatalytic activity.

A new analytical method has been proposed by utilizing an electromagnetic induction principle with a short-circuited microstrip line jig and the complex permeability spectra can be calculated without a known reference sample. The new method using the short-circuited microstrip line can exhibit higher sensitivity and a wider frequency band than coplanar waveguide and pick-up coil. Two magnetic thin films having a good in-plane uniaxial anisotropy are measured by using the induction method. The results show typical complex permeability spectra in good agreement with the theoretical analytical results. The measured permeability values are verified by comparing with the initial susceptibility derived from the sweeping field results. The difference of measured permeability values is less than 5%.

Nanocomposite of CoFe₂O₄/SrFe₁₂O₁₉ has been synthesized by the electrospinning and calcination process. A novel method that cobalt powder was used to replace traditional cobalt salt in the precursor sol-gel for electrospinning was proposed. The crystal structures, morphologies, and magnetic properties of these samples have been characterized in detail. Moreover, when the average crystallite size of the hard/soft phases reached up to an optimal value, the CoFe₂O₄ have an enhanced saturation magnetization of 62.8 emu/g and a coercivity of 2,290 Oe. Significantly, the hysteresis loops for the nanocomposites show a single-phase magnetization behavior, and it has been found that the exchange coupling interaction strongly exists in the CoFe₂O₄/SrFe₁₂O₁₉ magnetic nanocomposite nanofibers.

Being capable of gathering advanced properties of SrTiO₃ and NiFe₂O₄, hierarchical SrTiO₃/NiFe₂O₄ composite nanostructures have been synthesized toward enhanced photocatalytic activity.

Carbon or nitrogen doped cobalt ferrite nanoparticles were synthesized in the air by a facile calcination process. X-ray diffraction, mapping, X-ray photoelectron spectroscopy, and mössbauer spectra results indicate that the nonmetal elements as the interstitial one are doped into cobalt ferrite nanoparticles. The morphologies of doped cobalt ferrite nanoparticles change from near-spherical to irregular cubelike shapes gradually with the increased carbon or nitrogen concentration, and their particles sizes also increase more than 200 nm. Furthermore, the saturation magnetization of carbon doped cobalt ferrite is improved. Although the saturation magnetization of N-doped cobalt ferrite is not enhanced obviously due to the involved hematite, they also do not drop drastically. The results reveal an approach to synthesize large scale ferrite nanoparticles, and improve the magnetic properties of ferrite nanoparticles, and also provide the potential candidates to synthesis co-doped functional magnetic materials.