Bonding agents are an important type of additive that are used to increase the interfacial interaction in propellants. A suitable bonding agent can prevent the dewetting between the oxidant and binder, and thus effectively improve the mechanical properties of the propellant. In the current paper, the bonding mechanisms and research progress of different types of bonding agents such as alcohol amine bonding agents, borate ester bonding agents, aziridine bonding agents, hydantoin bonding agents, neutral polymer bonding agents, and so on, are reviewed and discussed. The evaluation methods of their bonding performances including molecular dynamic simulation, contact angle method, in situ loading SEM, characterization analysis, and mechanical analysis are summarized to provide design ideas and reference for future studies.
Titanate-based bonding agents are a class of efficient bonding agents for improving the mechanical properties of composite solid propellants, a kind of special composite material. However, high solid contents often deteriorate the rheological properties of propellant slurry, which limits the application of bonding agents. To solve this problem, a series of long-chain alkyl chelated titanate binders, N-n-octyl-N, N-dihydroxyethyl-lactic acid-titanate (DLT-8), N-n-dodecyl-N, N-dihydroxyethyl-lactic acid-titanate (DLT-12), N-n-hexadecyl-N, N-Dihydroxyethyl-lactic acid-titanate (DLT-16), were designed and synthesized in the present work. The infrared absorption spectral changes of solid propellants caused by binder coating and adhesion degrees of the bonding agents on the oxidant surface were determined by micro-infrared microscopy (MIR) and X-ray photoelectron spectroscopy (XPS), respectively, to characterize the interaction properties of the bonding agents with oxidants, ammonium perchlorate (AP) and hexogen (RDX), in solid propellants. The further application tests suggest that the bonding agents can effectively interact with the oxidants and effectively improve the mechanical and rheological properties of the four-component hydroxyl-terminated polybutadiene (HTPB) composite solid propellants containing AP and RDX. The agent with longer bond chain length can improve the rheological properties of the propellant slurry more significantly, and the propellant of the best mechanical properties was obtained with DLT-12, consistent with the conclusion obtained in the interfacial interaction study. Our work has provided a new method for simultaneously improving the processing performance and rheological properties of propellants and offered an important guidance for the bonding agent design.
To address the issues of slow curing rate, post-curing reactions, and suboptimal mechanical properties in the carboxyl-terminated polybutadiene (CTPB)/epoxy resin (EP) binder system used for solid propellants, this study optimized the curing system by introducing 593 aliphatic amine compounds containing primary and secondary amine groups as a cure accelerator. It is found that the incorporation of the cure accelerator improved the fracture strength and elongation at break of the CTPB/EP binder system. With the addition of 0.3 wt.% cure accelerator, the tensile fracture strength increased to 0.37 MPa, while the elongation at break reached 655%. Moreover, augmenting the quantity of cure accelerator can substantially elevate the crosslink density and gel fraction of the binder system. When the addition reaches 0.3 wt.%, the crosslink density is 4.3 × 10−4 mol/cm3. Further studies showed that 593 cure accelerator reduced the activation energy of the curing reaction of the CTPB/EP binder system, with higher levels of cure accelerator resulting in lower activation energy. This study established a preparation methodology for a CTPB/EP binder system with high elongation and tensile strength. These findings provide a solid scientific foundation for the application of CTPB-based binder systems in solid propellants.