In order to identify the nonlinear nonstationary pitting-wear fault signal of gears in gearbox, a new method of composite fault diagnosis for gearbox is proposed, which combines empirical mode decomposition with improved variational mode decomposition. Aiming at the problem of false modes in the results of empirical mode decomposition when processing signals, the energy method is used to eliminate and update the mode components, and the correlation coefficient method is used to calculate the correlation between the updated mode components and the original signal. The components with strong correlation are selected to form the combined mode components to weaken the noise and improve the signal-to-noise ratio. Aiming at the problem that variational mode decomposition method needs to manually determine the number of mode components and the penalty factor during signal decomposition, a combination of envelope spectral entropy and waveform method is proposed to determine the optimal parameter combination. By analyzing the pitting-wear composite fault vibration signals of gears in the gearbox and the normal signals of the gearbox, the effectiveness of the proposed method is verified, and a comparative analysis with the empirical mode decomposition method is performed to highlight the superiority of the proposed method.
Based on the lumped mass method, a torsional vibration model of the planetary gear system is established considering the nonlinear factors such as friction, time-varying meshing stiffness, backlash, and comprehensive error. The Runge–Kutta numerical method is used to analyze the motion characteristics of the system with various parameters and the influence of tooth friction on the bifurcation and chaos characteristics of the system. The numerical simulation results show that the system has rich bifurcation behavior with the excitation frequency, damping ratio, comprehensive error amplitude, load and backlash, and experiences multiple periodic motion and chaotic motion. Tooth friction makes the bifurcation behavior of the system fuzzy in the high frequency and heavy load areas, makes the chaos of the system restrained in the low-damping ratio and light load areas, advances the bifurcation point of the system in the small comprehensive error amplitude area, and makes the period window of the chaos area larger in the large-backlash area, which makes the bifurcation behavior of the system more complex.
15 February 2021 in International Journal of Nonlinear Sciences and Numerical Simulation
In order to study the influence of friction on the nonlinear dynamic characteristics of a planetary gear system, the dynamic model of a planet gear transmission system considering mixed elastohydrodynamic lubrication (EHL) friction, time-varying meshing stiffness, backlash and comprehensive meshing error is established. The Runge–Kutta method is used to solve the dynamic differential equations, and the bifurcation and chaos characteristics of the system are analysed through the bifurcation diagram, largest lyapunov exponent (LLE), Poincaré map, phase diagram, time history curve diagram and fast fourier transform (FFT)spectrum. The results of numerical simulation show that the planetary gear system with mixed EHL friction exhibits rich bifurcation characteristics, and the system experiences short-periodic motion, long-periodic motion, quasi-periodic motion and chaotic motion. The effect of tooth surface friction on the bifurcation characteristics of the planetary gear system is more obvious at high frequency than that at low frequency. Tooth surface friction causes the system to enter chaotic motion in advance.
In order to analyze the influence of the random parameters of the system on the nonlinear dynamic characteristics of the gear transmission system, considering the random perturbation of damping ratio, gear backlash, meshing frequency, meshing stiffness and the low frequency excitation caused by torque fluctuation, the random vibration equations of three-degree-of-freedom gear transmission system are established according to the Newton’s law. The motion differential equations are solved by the Runge–Kutta method. The effects of different random parameters such as load ratio, tooth frequency ratio, damping ratio, gear backlash and meshing stiffness on the dynamic response of the gear transmission system are analyzed in light and heavy loads and low and high speeds.