In this study, the structural and nanomechanical properties of Cu₂O thin films are investigated by X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) and nanoindentation techniques. The Cu₂O thin films are deposited on the glass substrates with the various growth temperatures of 150, 250 and 350 °C by using radio frequency magnetron sputtering. The XRD results show that Cu₂O thin films are predominant (111)-oriented, indicating a well ordered microstructure. In addition, the hardness and Young’s modulus of Cu₂O thin films are measured by using a Berkovich nanoindenter operated with the continuous contact stiffness measurements (CSM) option. Results indicated that the hardness and Young’s modulus of Cu₂O thin films decreased as the growth temperature increased from 150 to 350 °C. Furthermore, the relationship between the hardness and films grain size appears to closely follow the Hall-Petch equation.

In this study, Cu-doped ZnO (CZO) thin films were grown on glass substrates by using the radio frequency magnetron sputtering technique. The effects of Cu doping on the structural, surface morphological, optical properties, and wettability behaviors of CZO thin films were investigated by X-ray diffraction (XRD), atomic force microscopy (AFM), UV-Visible spectroscopy, and contact angle measurement, respectively. The XRD results indicated that all CZO thin films were textured, having a preferential crystallographic orientation along the hexagonal wurtzite (002) axis. The average transmittance in the visible wavelength region was above 80% for all CZO thin films. The optical band gap of the CZO films decreased from 3.18 to 2.85 eV when the Cu-doping was increased from 2% to 10%. In addition, the water contact angle measurements were carried out to delineate the Cu-doping effects on the changes in the surface energy and wettability of the films.

Although electrical fires constitute the greatest percentage of the main causes of building fires, the critical evidence used by fire investigators to identify electrical fires is not always convincing to the general public. In this study, we scrutinized the microstructures of fire-causing copper wires and simulated the external environmental conditions required for the formation of fire-causing arc beads. Our metallographic investigation revealed that the primary thermal dendrites of copper at the fire-causing arc bead grew parallel to one another, but in the opposite direction to the heat flow. We determined the relationships of the undercooling (∆T₀), the growth velocity (ν), and the primary spacing (λ) of the dendrites with respect to the electrical wire’s diameter. Accordingly, fire investigators can now identify fire-causing arc beads in terms of these metallographic characteristics, thereby providing clear scientific evidence for litigant judgments of electrical fires.

The influence of the substrate temperature on the structural, surface morphological, optical and nanomechanical properties of NiO films deposited on glass substrates using radio-frequency magnetron sputtering was examined by X-ray diffraction (XRD), atomic force microscopy (AFM), UV-Visible spectroscopy and nanoindentation, respectively. The results indicate that the substrate temperature exhibits significant influences on both the grain texturing orientation and surface morphology of the films. Namely, the dominant crystallographic orientation of the films switches from (111) to (200) accompanied by progressively roughening of the surface when the substrate temperature is increased from 300 °C to 500 °C. The average transmittance of the NiO films was also found to vary in the range of 60–85% in the visible wavelength region, depending on the substrate temperature and wavelength. In addition, the optical band gap calculated from the Tauc plot showed an increasing trend from 3.18 eV to 3.56 eV with increasing substrate temperature. Both the hardness and Young’s modulus of NiO films were obtained by means of the nanoindentation continuous contact stiffness measurements mode. Moreover, the contact angle between the water droplet and film surface also indicated an intimate correlation between the surface energy, hence the wettability, of the film and substrate temperature.

Fe-doped LiNbO₃ synthesized by the combustion method to seek new multiferroic materials exhibits room-temperature ferromagnetism, as reported in our previous work [1]. In this work, the defect structure of congruent and Fe-doped LiNbO₃ (0.57–3.3 mol %) powders was investigated in detail by several methods. The molar ratio of [Li]/([Li]+[Nb]) was determined by the Curie temperature (T_c) via DSC. Two peaks of T_c were observed due to phase splitting [2], and the phase at lower T_c disappears as the Fe doping concentration increases. The coexistence of two different oxidation states of Fe ions in LiNbO₃ was probed by XPS and UV-Vis spectroscopy. The Raman spectra exhibit displacements along the c axis of Li and Nb ions, and a deformation of the NbO₆ framework owing to Fe doping. Several doping models were applied in the Rietveld refinement of powder X-ray diffraction collected by synchrotron radiation. The fitting by the Nb vacancy model leads to an improbably distorted structure of congruent LiNbO₃. In Fe-doped LiNbO₃, we conjecture that Li and Nb vacancies coexist in the lattice structure; Fe⁺²/Fe⁺³ ions are substituted for Li ions at the regular Li site and may push the anti-site NbLi ion back to the regular Nb site.

The effects of annealing temperature on the structural, surface morphological and nanomechanical properties of Cu-doped (Cu-10 at %) NiO thin films grown on glass substrates by radio-frequency magnetron sputtering are investigated in this study. The X-ray diffraction (XRD) results indicated that the as-deposited Cu-doped NiO (CNO) thin films predominantly consisted of highly defective (200)-oriented grains, as revealed by the broadened diffraction peaks. Progressively increasing the annealing temperature from 300 to 500 °C appeared to drive the films into a more equiaxed polycrystalline structure with enhanced film crystallinity, as manifested by the increased intensities and narrower peak widths of (111), (200) and even (220) diffraction peaks. The changes in the film microstructure appeared to result in significant effects on the surface energy, in particular the wettability of the films as revealed by the X-ray photoelectron spectroscopy and the contact angle of the water droplets on the film surface. The nanoindentation tests further revealed that both the hardness and Young’s modulus of the CNO thin films increased with the annealing temperature, suggesting that the strain state and/or grain boundaries may have played a prominent role in determining the film’s nanomechanical characterizations.