To clarify how to arrive at earthquake ground motion parameters for use in evaluating the high rockfill dams during seismic loading conditions, as well as to evaluate reasonably the seismic response of dams subjected to strong earthquake, the differences of design response spectra determined by scenario earthquake and uniform hazard spectra theory are investigated in detail. Coupled with the safety evaluation of the Houziyan concrete‐faced rockfill dam (CFRD) with a height of 200 m located in meizoseismal regions, comprehensive comparisons of key safety evaluation indices are performed using input motions determined from the abovementioned two design response spectra. The key safety evaluation indices include dynamic response acceleration, permanent deformation, safety of the impervious body, safety factor, and sliding displacement of the potential failure sliding body. Additionally, the ultimate seismic capability of the high CFRD is discussed based on the two response spectra. More considerable results can be achieved and offered to the engineers for the seismic design. It is obvious that the uniform hazard spectra, which are used to adopt in the safety evaluation of high CFRD, typically result in conservative evaluations and unnecessary economic cost for seismic design and reinforcements.
Newmark sliding block approach has been extensively studied by many researchers in the past decades. Significant progress has been made to alleviate its deficiencies and overcome its simplifying assumptions, but some aspects such as the cyclic shear strength and time history vertical acceleration in the Newmark sliding displacement analysis are seldom considered strictly. In the presented research, a modified Newmark methodology for sliding deformation analysis of rock‐fill dams subjected to strong earthquake is proposed. In order to make the seismic safety evaluation of dams more realistic, the influence of cyclic shear strength (earthquake‐induced reduction of shear strength) and time history vertical acceleration obtained from the dynamic response analysis on the critical acceleration and accumulative sliding displacement of the flexible sliding body is considered. Detailed comparison between the proposed method and existing methods is performed via the analysis of two typical dams, that is, a virtual rock‐fill dam with a height of 100 m which is assumed to be situated on rock formation and a real core rock‐fill dam with a height of 150 m built on deep overburden layers. It is demonstrated that the cyclic shear strength and time history vertical acceleration within flexible sliding body, as highlighted in the proposed method, have significant effect on the seismic safety evaluation, critical acceleration, and accumulation of sliding deformation of rock‐fill dams subjected to strong earthquake loading. The existing approaches tend to provide unconservative evaluation on the consequences of earthquakes on rock‐fill dams.
The ballast pier is an important hydraulic structure of high head diversion hydropower station. Its function is to completely fix the pressure steel pipe and bear various axial forces on the pipe, and the pipe is not allowed to produce displacement and rotation in any direction. The safety of the ballast pier is directly related to the safety of the power station. The design of pier should be based on the design of pier shape, the anti-sliding stability and foundation stress of pier should be checked, and the volume of pier should be reduced as much as possible to reduce the project cost under the condition of satisfying the safety. Based on the analysis of pier design of Mujiajia-grade 1 hydropower station, this paper summarizes the design ideas of pier design of Gaositou hydropower station, hoping to be helpful to pier design of similar hydropower stations.