The study objective was to field-validate the technical feasibility of a membrane- and adsorption-enhanced water gas shift reaction process employing a carbon molecular sieve membrane (CMSM)-based membrane reactor (MR) followed by an adsorptive reactor (AR) for pre-combustion CO₂ capture. The project was carried out in two different phases. In Phase I, the field-scale experimental MR-AR system was designed and constructed, the membranes, and adsorbents were prepared, and the unit was tested with simulated syngas to validate functionality. In Phase II, the unit was installed at the test site, field-tested using real syngas, and a technoeconomic analysis (TEA) of the technology was completed. All project milestones were met. Specifically, (i) high-performance CMSMs were prepared meeting the target H₂ permeance (>1 m³/(m².hbar) and H₂/CO selectivity of >80 at temperatures of up to 300 °C and pressures of up to 25 bar with a <10% performance decline over the testing period; (ii) pelletized adsorbents were prepared for use in relevant conditions (250 °C < T < 450 °C, pressures up to 25 bar) with a working capacity of >2.5 wt.% and an attrition rate of <0.2; (iii) TEA showed that the MR-AR technology met the CO₂ capture goals of 95% CO₂ purity at a cost of electricity (COE) 30% less than baseline approaches.

Magnetic resonance spectroscopy of biomolecules has recently gained attention for clinical diagnosis. Its combination with saliva collection and analysis can promote early disease detection and monitoring, by identifying biomarkers of specific underlying pathology or disease as detected in saliva. With this novel, non-invasive technique, certain salivary biomarkers have been linked to dental and periodontal tissues pathology, as well as to specific head and neck cancer malignancies. At present, diagnostic biomarkers are still in need for further identification (e.g., diagnosis and monitoring of Sjögren’s syndrome), and nuclear magnetic resonance spectroscopy has been found to be a promising technique to compliment the current analytic methodology. Moreover, this article reports on the various data collection and analysis parameters used in the literature. Protocol standardization is yet to be established not only for the laboratory procedures, but also for the clinical sample collection. Herein, we review the current status of utilizing nuclear magnetic resonance in order to further support data on health associated biomarkers, and we also propose a saliva sampling scheduling protocol with the potential to be used in the clinical and experimental setting for standardization of the testing methodology.

Xerostomia is a common adverse effect of radiation therapy at the head and neck area. Radiation-induced xerostomia can be severe and detrimental for the quality of life. Clinicians and radiologists have focused on the prevention of xerostomia as feasible, which has been significantly improved in the recent decades with the use of the contemporary radiation technology. However, radiation-induced xerostomia still remains one of the most devastating side effects of radiation therapy. Clinical risk factors have been identified, but the variation of its incidence and presentation has turned the focus on the investigation of parameters that would be able to predict the onset of acute or chronic xerostomia for each individual patient. Recently, potential imaging parameters and biomarkers are investigated in order for early prediction of the incidence and severity of xerostomia. Here, we compile the resulting imaging biomarkers as have been identified in the recent literature based on MRI and CT performed in correlation with radiation therapy. The identification of such biomarkers is very promising for the prevention and control of xerostomia in the head and neck radiation setting.