Dry (CO₂) reforming of methane (DRM) is a well-studied reaction that is of both scientific and industrial importance. This reaction produces syngas that can be used to produce a wide range of products, such as higher alkanes and oxygenates by means of Fischer–Tropsch synthesis. DRM is inevitably accompanied by deactivation due to carbon deposition. DRM is also a highly endothermic reaction and requires operating temperatures of 800–1000 °C to attain high equilibrium conversion of CH₄ and CO₂ to H₂ and CO and to minimize the thermodynamic driving force for carbon deposition. The most widely used catalysts for DRM are based on Ni. However, many of these catalysts undergo severe deactivation due to carbon deposition. Noble metals have also been studied and are typically found to be much more resistant to carbon deposition than Ni catalysts, but are generally uneconomical. Noble metals can also be used to promote the Ni catalysts in order to increase their resistance to deactivation. In order to design catalysts that minimize deactivation, it is necessary to understand the elementary steps involved in the activation and conversion of CH₄ and CO₂. This review will cover DRM literature for catalysts based on Rh, Ru, Pt, and Pd metals. This includes the effect of these noble metals on the kinetics, mechanism and deactivation of these catalysts.

The selective catalytic conversion of biomass-derived syngas into ethanol is thermodynamically feasible at temperatures below roughly 350 °C at 30 bar. However, if methane is allowed as a reaction product, the conversion to ethanol (or other oxygenates) is extremely limited. Experimental results show that high selectivities to ethanol are only achieved at very low conversions, typically less than 10%. The most promising catalysts for the synthesis of ethanol are based on Rh, though some other formulations (such as modified methanol synthesis catalysts) show promise. (Critical review—173 references.)

Recent developments in natural gas production technology have led to lower prices for methane and renewed interest in converting methane to higher value products. Processes such as those based on syngas from methane reforming are being investigated. Another option is methane aromatization, which produces benzene and hydrogen: 6CH₄(g) → C₆H₆(g) + 9H₂(g) ΔG^o _r = +433 kJ mol⁻¹ ΔH^o _r = +531 kJ mol⁻¹. Thermodynamic calculations for this reaction show that benzene formation is insignificant below ∼600 °C, and that the formation of solid carbon [C(s)] is thermodynamically favored at temperatures above ∼300 °C. Benzene formation is insignificant at all temperatures up to 1000 °C when C(s) is included in the calculation of equilibrium composition. Interestingly, the thermodynamic limitation on benzene formation can be minimized by the addition of alkanes/alkenes to the methane feed. By far the most widely studied catalysts for this reaction are Mo/HZSM-5 and Mo/MCM-22. Benzene selectivities are generally between 60 and 80% at methane conversions of ∼10%, corresponding to net benzene yields of less than 10%. Major byproducts include lower molecular weight hydrocarbons and higher molecular weight substituted aromatics. However, carbon formation is inevitable, but the experimental findings show this can be kinetically limited by the use of H₂ or oxidants in the feed, including CO₂ or steam. A number of reactor configurations involving regeneration of the carbon-containing catalyst have been developed with the goal of minimizing the cost of regeneration of the catalyst once deactivated by carbon deposition. In this tutorial review we discuss the thermodynamics of this process, the catalysts used and the potential reactor configurations that can be applied.

Increased demand for liquid transportation fuels coupled with gradual depletion of oil reserves and volatile petroleum prices have recently renewed interest in coal-to-liquids (CTL) technologies. Large recoverable global coal reserves can provide liquid fuels and significantly reduce dependence on oil imports. Direct coal liquefaction (DCL) converts solid coal (H/C ratio ≈ 0.8) to liquid fuels (H/C ratio ≈ 2) by adding hydrogen at high temperature and pressures in the presence or absence of catalyst. This review provides a comprehensive literature survey of the coal structure, chemistry and catalysis involved in direct liquefaction of coal. This report also touches briefly on the historical development and current status of DCL technologies. Key issues, challenges involved in DCL process and directions for the future research are also addressed.