Soil water and heat transfer is especially complicated during the freezing and thawing processes over the high‐altitude cold regions. In this study, four sensitivity tests of soil water and heat transfer parameterizations including replacing soil property data (SP1), soil resistance scheme modification (SP2), soil thermal conductivity scheme (SP3) and virtual temperature scheme (SP4), and four combination experiments (SP1+SP2+SP3/SP5, SP1+SP2+SP4/SP6, SP1+SP3+SP4/SP7, and SP1+SP2+SP3+SP4/SP8) were done using Community Land Model (CLM5.0) to examine its performances for soil water and heat transfer modeling on the Tibetan Plateau (TP) both in single‐point and regional simulations. The observed data from five eddy covariance sites, four soil moisture and temperature networks and 60 sites of soil temperature observations on the TP were used to evaluate the results. Single‐point simulations show that SP2 experiment reduced the wet biases of soil moisture in semiarid area, but enhanced the error of soil temperature. SP6 shows the best performances in simulating soil moisture, and SP3 in soil temperature. Regional simulations show that the SP7 experiment had the best performances for soil water and heat transfer simulation on the TP, and improved the simulation of soil freezing‐thawing processes. Compared to CLM5.0 default simulation, SP7 shows the best performances. For soil moisture, it reduced average Bias by 23%, Root Mean Square Error (RMSE) by 18%, and increased the Correlation Coefficient (Corr) by2%. For soil temperature, it reduced the Bias by 9%, 10%, 23%, and 13% at four soil depths on the TP, respectively.
Surface albedo is a crucial parameter in accurately and quantitatively estimating energy and water budget on the Tibetan Plateau (TP) and is also one of the largest radiative uncertainties in land surface modelling attempts. Based on an 8-year ground-based observation of the surface albedo over typical alpine meadows at Maqu and Maduo sites in the eastern TP, the performance of surface albedo products of Global LAnd Surface Satellite (GLASS) and Moderate Resolution Imaging Spectroradiometer (MODIS) in describing albedo variations at daily, 8-day, seasonal timescales, and during different special weather conditions were analyzed. Compared with the ground-based observation in Maqu, the 8-day albedo products from GLASS and MCD43B3 present maximum negative biases of −0.030 and −0.027 at Maqu, respectively. The black-sky albedo (BSA) of GLASS product coincides well with the ground-based observation in Maduo, with root mean square error (RMSE) of 0.092 and correlation coefficient (R) of 0.833, whereas that of MCD43B3 had an RMSE of 0.072 and R of 0.752. However, they are underestimated when the albedo is greater than 0.4. At the seasonal timescale, the BSA of GLASS and MCD43B3 underestimated the ground-based observation of Maqu by 0.015 in summer, while their white-sky albedo (WSA) are slightly overestimated and closer to the ground-based observation. In daily timescale, the response of surface albedo to soil moisture is different in semihumid and semiarid areas in summer. For both sites, the blue-sky-albedo of MCD43A3 has better agreement with the ground-based observation than GLASS and MCD43B3, as it improves the temporal resolution and calculates the albedo by weighting multiple observations within 16 days to be closer to the actual surface. However, even MCD43A3 could not capture the slowdown processes of albedo changes resulted by small snowfall processes or the snow aging due to cloud cover and inversion algorithms.
The newly developed WRF-Hydro model is a fully coupled atmospheric and hydrological processes model suitable for studying the intertwined atmospheric hydrological processes. This study utilizes the WRF-Hydro system on the Three-River source region. The Nash-Sutcliffe efficiency for the runoff simulation is 0.55 compared against the observed daily discharge amount of three stations. The coupled WRF-Hydro simulations are better than WRF in terms of six ground meteorological elements and turbulent heat flux, compared to the data from 14 meteorological stations located in the plateau residential area and two flux stations located around the lake. Although WRF-Hydro overestimates soil moisture, higher anomaly correlation coefficient scores (0.955 versus 0.941) were achieved. The time series of the basin average demonstrates that the hydrological module of WRF-hydro functions during the unfrozen period. The rainfall intensity and frequency simulated by WRF-Hydro are closer to global precipitation mission (GPM) data, attributed to higher convective available potential energy (CAPE) simulated by WRF-Hydro. The results emphasized the necessity of a fully coupled atmospheric-hydrological model when investigating land-atmosphere interactions on a complex topography and hydrology region.
Wind disasters are responsible for significant physical destruction, injury, loss of life, and economic damage. This study examined the extreme wind triggering mechanism over a typical mountain area with complex terrain, i.e., Dali city in Yunnan Province on the Yunnan-Guizhou Plateau in China. Using the observation data, we first optimized the Weather Research and Forecasting (WRF) model configuration and parametrization schemes for better simulating the wind in this area using a 1-month simulation. Then, the triggering mechanism of extreme wind was investigated by performing a series of sensitive experiments based on a typical extreme wind case. The results indicate that terrain uplift is critical for triggering the local 8–9-scale (the wind velocity between 17.2 and 24.4 m/s) extreme winds over high topography regions. When a large-scale atmospheric circulation is passing, accompanied with regional terrain lifting, the instantaneous wind velocity can reach 9- to 10-scale (the mean wind velocity between 20.8 and 28.4 m/s), causing broken power lines. These results suggest that it is essential to avoid sites where these factors can affect the operation of power transmission lines, or to establish warning systems in the existing systems.
26 April 2025 in Journal of Geophysical Research: Atmospheres
The Tibetan Plateau has warmed markedly alongside increased nighttime precipitation, yet the mechanisms remain poorly understood. Using CLM5.0 sensitivity experiments with 50% nighttime precipitation perturbations (HALF and PLUS50) and fixed precipitation variability (FIX1979), we show that nighttime precipitation anomalies modulate soil moisture, repartition turbulent and ground heat fluxes and, during daytime, alter surface albedo. HALF and FIX1979 amplify land surface temperature (LST) warming by 0.07°C decade −1 and 0.17°C decade −1 , respectively; PLUS50 reduces it by 0.06°C decade −1 . LST warming sensitivity peaks over arid/semi‐arid regions and is offset responses in semi‐humid regions. The response is diurnally asymmetric: daytime LST is jointly controlled by evapotranspiration and albedo anomalies, whereas nighttime LST is dominated by changes in turbulent and ground heat fluxes. These results establish nighttime precipitation and its variability as key regulators of high terrain surface warming and demonstrate that hourly‐resolved diagnostics are essential for evaluating diurnally varying land‐atmosphere coupling.