Shaun Alia

Dr. Shaun Alia


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 October 2019 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
Shaun AliaShaun Alia
Shaun Alia
SSSarah Stariha
Sarah Stariha
RBRod L. Borup
Rod L. Borup
Membrane electrode assembly durability is explored for polymer electrolyte membrane electrolyzers, focusing on catalyst (iridium, Ir) degradation at low loading and dynamic operation. Low catalyst loading and high cell potential are critical to observing durability losses over reasonably short experiments, regardless of test profile. While small losses are seen during steady operation, cycling greatly accelerates performance decreases. Ir dissolution mechanistically drives performance loss, thinning the anode catalyst layer and resulting in increasing kinetic losses during extended operation. While morphological changes to the catalyst layer are found, increasing polarization resistance suggests that degradation at the catalyst/ionomer/membrane interface may also contribute. Electrolyzer operation with model wind and solar profiles results in less severe performance losses compared to triangle- and square-wave potential cycling due to the lower cycling frequency of the renewable profiles. However, in both cases kinetics dominated the loss, indicating that higher cycling rates accelerate loss and can be used to project the impact of intermittency on device lifetime. These results suggest that performance losses impact electrolyzers’ abilities to operate with low catalyst loading and intermittent inputs, and that a combination of component development and system controls are needed to limit potential and performance loss.

6 February 2018 in ACS Catalysis
Verified
Journal Article
Closed access
Shaun AliaShaun Alia
Shaun Alia
SSSarah Shulda
Sarah Shulda
CNChilan Ngo
Chilan Ngo
SPSvitlana Pylypenko
Svitlana Pylypenko
BPBryan S. Pivovar
Bryan S. Pivovar

1 August 2023 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
EPElliot Padgett
Elliot Padgett
GBGuido Bender
Guido Bender
AHAndrew Haug
Andrew Haug
KLKrzysztof Lewinski
Krzysztof Lewinski
FSFuxia Sun
Fuxia Sun
Shaun AliaShaun Alia
Shaun Alia
Improving utilization, performance, and stability of low iridium (Ir)-loaded anodes is a key goal to enable widespread adoption of polymer electrolyte membrane water electrolysis (PEMWE) for clean hydrogen production. A potential limitation is high ionic or electronic resistance of the anode catalyst layer, which leads to poor catalyst utilization, increased voltage losses, and high local overpotentials that can accelerate degradation. While catalyst layer resistance is relatively well-understood in fuel cells and other porous electrode systems, characterization of these effects is not as well established in PEMWE research. Here we present in-situ methods for measuring catalyst layer resistance in electrolysis cells using a non-faradaic H2/H2O condition as well as methods for calculating the associated voltage losses. These methods are applied to anode catalyst layers based on IrO2 nanoparticles as well as dispersed nano-structured thin film (NSTF) Ir catalysts. Trends with anode catalyst loading and interactions between the porous transport layer and catalyst layer are investigated for IrO2 anodes. Post-mortem microscopic analysis of durability-tested anodes is also presented, showing uneven degradation of the catalyst layer caused by catalyst layer resistance.

14 September 2018 in ACS Catalysis
Verified
Journal Article
Closed access
FGFernando Godínez-Salomón
Fernando Godínez-Salomón
LALuis Albiter
Luis Albiter
Shaun AliaShaun Alia
Shaun Alia
BPBryan S. Pivovar
Bryan S. Pivovar
LCLuis E. Camacho-Forero
Luis E. Camacho-Forero
CRChristopher Rhodes
Christopher Rhodes

1 May 2021 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
JLJiangjin Liu
Jiangjin Liu
Zhenye KangZhenye Kang
Zhenye Kang
DLDongguo Li
Dongguo Li
MPMagnolia Pak
Magnolia Pak
Shaun AliaShaun Alia
Shaun Alia
AWAdam Z. Weber
Adam Z. Weber
Many solid-state devices, especially those requiring anion conduction, often add a supporting electrolyte to enable efficient operation. The prototypical case is that of anion-exchange-membrane water electrolyzers (AEMWEs), where addition of an alkali metal solution improves performance. However, the specific mechanism of this performance improvement is currently unknown. This work investigates the functionality of the alkali metal solution in AEMWEs using experiments and mathematical models. The results show that additional hydroxide plays a key role not only in ohmic resistance of the membrane and catalyst layer but also in the reaction kinetics. The modeling suggests that the added liquid electrolyte creates an additional electrochemical interface with the electrocatalyst that provides ion-transport pathways and distributes product gas bubbles; the total effective electrochemical active surface area in the cell with 1 M KOH is 5 times higher than that of the cell with DI water. In the cell with 1 M KOH, more than 80% of the reaction current is associate with the liquid electrolyte. These results indicate the importance of high pH of electrolyte and catalyst/electrolyte interface in AEMWEs. The understanding of the functionality of the alkali metal solution presented in this study should help guide the design and optimization of AEMWEs.

2 March 2019 in Journal of the Electrochemical Society
Verified
Journal Article
Open access
PDF file
Shaun AliaShaun Alia
Shaun Alia
GAGrace C. Anderson
Grace C. Anderson
This paper evaluates iridium (Ir) and Ir oxide nanoparticles for baseline oxygen evolution performance and durability in rotating disk electrode (RDE) half-cells. These efforts address a literature gap, developing best practices for RDE testing by focusing on ink preparation and test protocols that affect measured activities. While Ir nanoparticles produce double the mass activity of Ir oxide in half-cells, the benefit is not observed in single-cells due to near-surface oxidation during conditioning. Ir oxide nanoparticle durability, however, is improved in both RDE and membrane electrode assemblies (MEAs) due to slower dissolution kinetics. Establishing separate Ir and Ir oxide baselines are critical since RDE may overestimate Ir performance and underestimate Ir durability when compared to Ir oxide in MEAs. While half-cells may be a reasonable gauge for oxygen evolution performance, the technique is limited in approximating long-term durability since dissolution dominates loss at electrolysis-relevant potentials.