Reservoir sedimentation results in ongoing loss of storage capacity all around the world. Thus, effective sediment management in reservoirs is becoming an increasingly important task requiring detailed process understanding. Computational fluid dynamics modelling can provide an efficient means to study relevant processes. An existing in-house hydrodynamic code has been extended to model particle-driven gravity currents. This has been realised through a buoyancy term which was added as a source term to the momentum equation. The model was successfully verified and validated using literature data of lock exchange experiments. In addition, the capability of the model to optimize venting of turbidity currents as an efficient sediment management strategy for reservoirs was tested. The results show that the concentration field during venting agrees well with observations from laboratory experiments documented in literature. The relevance of particle-driven gravity currents for the flow field in reservoirs is shown by comparing results of simulations with and without buoyant forces included into the model. The accuracy of the model in the area of the bottom outlet can possibly be improved through the implementation of a non-upwind scheme for the advection of velocity.
A systematic variation of the exposure level of a spherical particle in an array of multiple spheres in a high Reynolds number turbulent open-channel flow regime was investigated while using the Large Eddy Simulation method. Our numerical study analysed hydrodynamic conditions of a sediment particle based on three different channel configurations, from full exposure to zero exposure level. Premultiplied spectrum analysis revealed that the effect of very-large-scale motion of coherent structures on the lift force on a fully exposed particle resulted in a bi-modal distribution with a weak low wave number and a local maximum of a high wave number. Lower exposure levels were found to exhibit a uni-modal distribution.
Studies of turbulent flows over heterogeneous surfaces revealed elevated turbulent kinetic energy and Reynolds shear stress in low-momentum-path (LMP) regions. These regions induce large-scale multi-cellular secondary flows. The aim of the current study is to analyse the influence of these regions on drag, lift and lateral forces acting on spherical particles at different exposure levels, thereby addressing the hitherto unknown contribution of the spanwise inhomogeneities. For this reason, numerical simulations of turbulent open-channel flow with varying aspect ratio (AR = 1, 3, 5) over single-sized spherical particles with diameter D was studied. Ensemble-averaged cross-flow velocity vectors showed large-scale secondary flows to penetrate in-between the spherical particles, therefore stretching over the entire flow depth. Their magnitude above 0.8D was observed to range between 12.9% − 14.9% of U. Strong tertiary vortices in the vicinity of the lateral walls were identified by analysis of swirl strength. Triple decomposition of streamwise velocity fluctuations showed strong backflow at the trailing edge of the spherical particles in high-momentum-path (HMP) regions. Furthermore, it was found that drag forces are higher in HMPs, which is attributed to the larger streamwise pressure gradient.