This paper proposes a deep reinforcement learning (DRL) method that combines random network distillation (RND) and long short-term memory (LSTM) to address the tracking control problem, while leveraging the inherent symmetry in robotic arm movements to eliminate the need for learning or knowing the system’s dynamic model. In general, the complexity and strong coupling of robotic manipulators make trajectory tracking extremely challenging. Firstly, the prediction network and fixed network are jointly trained using the RND method. The difference in output values between the two networks acts as an internal reward for the robotic manipulator environment. This internal reward mechanism encourages the robotic arm agent to actively explore unpredictable and unknown environmental states, thereby consequently boosting the performance and efficiency of the tracking control for the robotic manipulator. Then, the Soft Actor-Critic (SAC) algorithm, the LSTM network, and the attention mechanism are integrated to resolve the instability problem during training and acquire a stable policy. The LSTM model effectively captures the symmetry and temporal changes in joint angles, while the attention mechanism dynamically prioritizes important features, thereby reducing the instability of the robotic manipulator during tracking tasks and enhancing feature extraction efficiency. The simulation outcomes demonstrate that the proposed method effectively performs the robot tracking task, confirming the efficacy and efficiency of the DRL algorithm.
In this paper, a deep reinforcement learning (DRL) approach based on generative adversarial imitation learning (GAIL) and long short-term memory (LSTM) is proposed to resolve tracking control problems for robotic manipulators with saturation constraints and random disturbances, without learning the dynamic and kinematic model of the manipulator. Specifically, it limits the torque and joint angle to a certain range. Firstly, in order to cope with the instability problem during training and obtain a stability policy, soft actor–critic (SAC) and LSTM are combined. The changing trends of joint position over time are more comprehensively captured and understood by employing an LSTM architecture designed for robotic manipulator systems, thereby reducing instability during the training of robotic manipulators for tracking control tasks. Secondly, the obtained policy by SAC-LSTM is used as expert data for GAIL to learn a better control policy. This SAC-LSTM-GAIL (SL-GAIL) algorithm does not need to spend time exploring unknown environments and directly learns the control strategy from stable expert data. Finally, it is demonstrated by the simulation results that the end effector of the robot tracking task is effectively accomplished by the proposed SL-GAIL algorithm, and more superior stability is exhibited in a test environment with interference compared with other algorithms.
6 September 2024 in IEEE Robotics and Automation Letters
This letter proposes an adaptive neural network synchronous tracking control strategy that can be suitable for event-triggered mechanism in response to the modeling uncertainties and communication delays in bilateral teleoperation systems. Through introducing the event-triggered mechanism with the aim of reducing the network communication frequency in teleoperation system, the leader and follower robots communicate with each other only when the triggering conditions are fulfilled, which enhances the efficiency of the network communication. This control strategy can guarantee the exponential convergence of the position synchronization tracking error of the leader-follower robot end-effector. Moreover, the event-triggered conditions do not require any empirical design, but can be derived inversely with the aid of the Lyapunov stability theory. And the triggering time interval between two neighboring events is verified to be non-zero. It is demonstrated by utilizing the Lyapunov principle that the presented adaptive neural network control strategy ensures the final asymptotic convergence and exponential convergence of the position synchronization tracking error for leader-follower robots under the designed event-triggered mechanisms. Eventually, the feasibility and effectiveness of the developed control strategy are validated by comparative cases.
9 September 2024 in IEEE Transactions on Fuzzy Systems
The adaptive fuzzy logic position and force control scheme are proposed for multi-manipulators with nonlinear uncertainties, external disturbances, and input dead-zone nonlinearities. Specifically, the adaptive fuzzy logic system is employed for approximating the nonlinear dynamics of the manipulator, and the approximation error is compensated online by the designed robust control terms. Additionally, to address the nonlinear input dead-zone effect, a new theorem is presented to stabilize the system without using specific Nussbaum functions. Consequently, the proposed robust control algorithm exhibits strong applicability. Finally, the stability of the multi-manipulator tracking system is verified using a Lyapunov function. Simulation results demonstrate the effectiveness of this strategy.
In this study, tracking control and saturation nonlinearities problems of a flexible mobile vehicle-manipulator with disturbance uncertainty are investigated. Based on differential equations model, a novel iterative learning control (ILC) algorithm is designed, where two saturation functions and two hyperbolic tangent functions are developed to deal with actuator saturation constraint and an adaptive law is developed to reduce the impact of disturbance uncertainty. With the ILC algorithm, the target of tracking control and vibration attenuation of mobile manipulator can come true. Simulations are executed to verify the effectiveness of designed algorithm.
This paper investigates the stabilization and trajectory tracking problem of wheeled mobile robot with a ceiling-mounted camera in complex environment. First, an adaptive visual servoing controller is proposed based on the uncalibrated kinematic model due to the complex operation environment. Then, an adaptive controller is derived to provide a solution of uncertain dynamic control for a wheeled mobile robot subject to parametric uncertainties. Furthermore, the proposed controllers can be applied to a more general situation where the parallelism requirement between the image plane and operation plane is no more needed. The overparameterization of regressor matrices is avoided by exploring the structure of the camera-robot system, and thus, the computational complexity of the controller can be simplified. The Lyapunov method is employed to testify the stability of a closed-loop system. Finally, simulation results are presented to demonstrate the performance of the suggested control.