Alexey Fomin

Dr. Alexey Fomin

Mechanical Engineering Research Institute of the Russian Academy of Sciences (IMASH RAN)
orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2021 in International Journal of Advanced Robotic Systems
Verified
Journal Article
Open access
PDF file
Anton AntonovAnton Antonov
Anton Antonov
Alexey FominAlexey Fomin
Alexey Fomin
VGVictor Glazunov
Victor Glazunov
SKSergey Kiselev
Sergey Kiselev
Giuseppe CarboneGiuseppe Carbone
Giuseppe Carbone
The proposed study provides a solution of the inverse and forward kinematic problems and workspace analysis for a five-degree-of-freedom parallel–serial manipulator, in which the parallel kinematic chain is made in the form of a tripod and the serial kinematic chain is made in the form of two carriages displaced in perpendicular directions. The proposed manipulator allows to realize five independent movements—three translations and two rotations motion pattern (3T2R). Analytical relationships between the coordinates of the end-effector and five controlled movements provided by manipulator’s drives (generalized coordinates) were determined. The approach of reachable workspace calculation was defined with respect to available design constraints of the manipulator based on the obtained algorithms of the inverse and forward kinematics. Case studies are considered based on the obtained algorithms of inverse and forward kinematics. For the inverse kinematic problem, the solution is obtained in accordance with the given laws of position and orientation change of the end-effector, corresponding to the motion along a spiral-helical trajectory. For the forward kinematic problem, various assemblies of the manipulator are obtained at the same given values of the generalized coordinates. An example of reachable workspace designing finalizes the proposed study. Dimensions and extreme values of the end-effector orientation angles are calculated.

22 February 2022 in Robotics
Verified
Journal Article
Open access
PDF file
Pavel LaryushkinPavel Laryushkin
Pavel Laryushkin
Anton AntonovAnton Antonov
Anton Antonov
Alexey FominAlexey Fomin
Alexey Fomin
VGVictor Glazunov
Victor Glazunov
The COVID-19 pandemic has placed unprecedented stress on the world healthcare system and demonstrated the need for modern automated robotic solutions for numerous medical applications. Often, robots that provide spherical motion of the end-effector are used in this area. In this paper, we discuss a spherical mechanism with a circular rail and provide several possible variations of the design: spherical robots with three or four legs and 4-DOF robots with an additional translational DOF, including a decoupled mechanism. The screw theory is used to analyze the mobility of the discussed mechanisms, and their advantages and drawbacks are discussed.

24 March 2023 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Closed access
PDF file
Pavel LaryushkinPavel Laryushkin
Pavel Laryushkin
Alexey FominAlexey Fomin
Alexey Fomin
Anton AntonovAnton Antonov
Anton Antonov

7 February 2021 in Robotics
Verified
Journal Article
Open access
PDF file
Alexey FominAlexey Fomin
Alexey Fomin
Anton AntonovAnton Antonov
Anton Antonov
VGVictor Glazunov
Victor Glazunov
YRYuri Rodionov
Yuri Rodionov
The proposed study focuses on the inverse and forward kinematic analysis of a novel 6-DOF parallel manipulator with a circular guide. In comparison with the known schemes of such manipulators, the structure of the proposed one excludes the collision of carriages when they move along the circular guide. This is achieved by using cranks (links that provide an unlimited rotational angle) in the manipulator kinematic chains. In this case, all drives stay fixed on the base. The kinematic analysis provides analytical relationships between the end-effector coordinates and six controlled movements in drives (driven coordinates). Examples demonstrate the implementation of the suggested algorithms. For the inverse kinematics, the solution is found given the position and orientation of the end-effector. For the forward kinematics, various assembly modes of the manipulator are obtained for the same given values of the driven coordinates. The study also discusses how to choose the links lengths to maximize the rotational capabilities of the end-effector and provides a calculation of such capabilities for the chosen manipulator design.

12 June 2021 in Machines
Verified
Journal Article
Open access
PDF file
Alexey FominAlexey Fomin
Alexey Fomin
Anton AntonovAnton Antonov
Anton Antonov
VGVictor Glazunov
Victor Glazunov
Giuseppe CarboneGiuseppe Carbone
Giuseppe Carbone
The study provides a solution to a dimensional synthesis problem for a hexapod-type reconfigurable parallel mechanism, which can change its configuration to realize different trajectories of its output link while having a single drive. The work presents an original procedure to find the dimensions of some mechanism’s links and their initial configuration to reproduce these trajectories. After describing the mechanism, the paper examines kinematic relations representing the basis for the subsequent synthesis algorithm. Next, the obtained expressions are extended and provide a system of equations to be solved. The structure of this equation system allows it to be solved effectively by numerical methods, which is demonstrated with an example. The proposed algorithm of dimensional synthesis does not require solving the optimization problems, in contrast to the familiar methods of dimensional synthesis of parallel mechanisms. Further, the suggested approach to the synthesis problem allows finding solution in a fast and computationally efficient manner.

13 April 2022 in Machines
Verified
Journal Article
Open access
PDF file
Pavel LaryushkinPavel Laryushkin
Pavel Laryushkin
Anton AntonovAnton Antonov
Anton Antonov
Alexey FominAlexey Fomin
Alexey Fomin
TETerence Essomba
Terence Essomba
This article presents the velocity and singularity analysis for a five-degree-of-freedom (5-DOF) parallel-serial manipulator. The hybrid structure of the manipulator combines a tripod-like parallel part and a serial part, represented as two carriages moving in perpendicular directions. This manipulator provides its end-effector with a 3T2R motion pattern, which includes three independent translations and two independent rotations. First, the study briefly discusses the manipulator design and the results of the position analysis. These results form the basis for the subsequent velocity and singularity analysis, performed by screw theory. The screw coordinates of the unit twists are written for each manipulator joint, and then through the reciprocal screw approach, the actuation and constraint wrenches of the manipulator are obtained by simple inspection. Based on these twists and wrenches, the paper forms the velocity equation and shows an example of the inverse velocity analysis for a given end-effector trajectory. The same example is solved by numerical differentiation to verify the proposed approach. Next, the paper investigates singular configurations by analyzing the wrench system of the manipulator and presents several conditions for serial and parallel singularities. Each condition has both a symbolic representation, given by an equation for screw coordinates of certain wrenches, and a visual representation, which shows the manipulator in a singular configuration.