The deep‐sea ground contains a huge amount of energy and mineral resources, for example, oil, gas, and minerals. Various infrastructures such as floating structures, seabed structures, and foundations have been developed to exploit these resources. The seabed structures and foundations can be mainly classified into three types: subsea production structures, offshore pipelines, and anchors. This study reviewed the development, installation, and operation of these infrastructures, including their structures, design, installation, marine environment loads, and applications. On this basis, the research gaps and further research directions were explored through this literature review. First, different floating structures were briefly analyzed and reviewed to introduce the design requirements of the seabed structures and foundations. Second, the subsea production structures, including subsea manifolds and their foundations, were reviewed and discussed. Third, the basic characteristics and design methods of deep‐sea pipelines, including subsea pipelines and risers, were analyzed and reviewed. Finally, the installation and bearing capacity of deep‐sea subsea anchors and seabed trench influence on the anchor were reviewed. Through the review, it was found that marine environment conditions are the key inputs for any offshore structure design. The fabrication, installation, and operation of infrastructures should carefully consider the marine loads and geological conditions. Different structures have their own mechanical problems. The fatigue and stability of pipelines mainly depend on the soil‐structure interaction. Anchor selection should consider soil types and possible trench formation. These focuses and research gaps can provide a helpful guide on further research, installation, and operation of deep‐sea structures and foundations.

This study investigates the effect of nonlinear strengths of sloshing on damping performance of side-mounted perforated baffles and discusses the influence of perforated baffles on resonance characteristics of sloshing flow. The model performance score is adopted to evaluate the nonlinear strength of water sloshing. A microscopic model and a volume-averaged macroscopic model are established to simulate the sloshing flow in a two-dimensional (2D) water tank with perforated baffles. In addition, a series of experimental tests are conducted to validate the numerical model. By analyzing the effects of nonlinear strength on damping performance of perforated baffles, a critical nonlinear strength of Reynolds number (Re) equal to 56 000 is obtained: For nonlinear strength smaller than critical nonlinear strength, the damping effect due to perforated baffles is mainly achieved by shifting the energy density to the excitation frequency; for nonlinear strength enhanced to the critical value, further increasing nonlinear strength shows slight influence on damping performance, and an additional increase in sloshing response occurred due to violent interaction between baffles and fluid flow. Importantly, the Reynolds number corresponding to the critical nonlinear strength is independent of the properties of perforated baffles, such as porosity and mounted form. Furthermore, the resonance effect of sloshing flow can be significantly weakened with an increasing blockage of perforated baffles, accompanying negative growth of maximum force amplitude on bulkhead.

In order to better simulate the actual working conditions of wind turbines more realistically, this paper adopts the two-way fluid–structure coupling method to study the NREL 5 MW wind turbine, considering the blade coupling deformation and equivalent stress and strain distribution of the blades with different internal structures under different working conditions. The results show that the maximum equivalent stress and strain distribution of the beam–structure wind turbine blade was near the leading edge of the blade. The maximum equivalent stress and strain distribution of the shell structure wind turbine blade was near the leading edge of the blade root, and the dangerous area is obvious but smaller than that of the beam-type wind turbine. The coupled deformation of a wind turbine model with a shell structure blade with a web is significantly reduced, and the equivalent stress and strain distribution of the skin is similar to that of the shell structure, but the numerical value and the maximum equivalent stress distribution area are significantly smaller. From the comparison of the three, the shell structure blade with a web is the best.

Suction-bucket-supported jacket foundations are being used increasingly for offshore wind turbines, the advantages being large bearing capacity and efficient installation. For a large-capacity wind turbine, the pullout capacity and displacement of the bucket in the tripod or tetrapod jacket can be critical to the safety of the structure. The loading rate, which is commonly dominated by the offshore environmental conditions, has a significant effect on the ultimate capacity and stiffness of the bucket foundation. In this paper, a numerical model is developed to investigate the response of a bucket foundation under vertical pullout loading at different rates. A bounding-surface model based on critical state soil mechanics is introduced to account for the soil behaviour under different stress states and drainage conditions. The model is modified and calibrated against a comprehensive set of laboratory tests, including both triaxial compression, triaxial extension and direct simple shear tests in drained and undrained conditions. How partial drainage affects the load–displacement response and pore pressure field are thus presented. A parametric study on the selection of soil parameters is also conducted to shed light on practical foundation design.