The internet of things connects objects to the internet, enabling the dialogue between devices and users, providing new opportunities for applications, such as thermal comfort. In the research, adequate sensors were used to measure the heat index, the thermal discomfort index and the temperature and humidity index based on the temperature and relative humidity of a remote indoor environment. This research evaluated the level of thermal comfort in real-time using tools of storage, processing and analysis of big data information from the collection of IoT devices. With the analysis of the environment, it is possible to intelligently monitor the level of comfort and alert possible hazards to the people present. Machine learning algorithms were also used to analyse the history of stored data and formulate models capable of making predictions of the parameters of the environment. Health researchers, for example, have the necessary knowledge to evaluate clinical data, but they are not used to using data analysis resources and machine learning algorithms. The platform was developed to reduce dependence on data experts and encourage healthcare researchers to develop their own models by automating the steps required for model development, using automated machine learning (AutoML).
Air pollution is one of the biggest problems affecting large urban areas. Better monitoring of regions suffering from this type of pollution is in the interest of public health. Although many cities employ sensors to monitor air pollution, a current concern is how to establish the ideal number of sensors to monitor a given geographical region. To address this concern, this research proposes a method to optimize the number of sensors in an air pollution monitoring network to cover a given region efficiently and precisely and uses the metropolitan region of São Paulo, Brazil, and CO sensors as an example. The model of Fragmentation into Groups via Routes is proposed to distribute sensors within micro-regions that display similar air pollution characteristics. A network of virtual sensors is created, and the output of each sensor is established using a method of spatial interpolation called IDW. To identify the optimum sensor configuration, a genetic algorithm is used to assess the topology with the lowest variance of data spread. A lesser number of sensor stations to be treated leads to faster responses to sudden changes in urban conditions. Therefore, municipality authorities can take quick measures to improve the population’s wellness.
Coverage prediction is an essential method of planning broadcast and long-range wireless communication systems, minimizing the need for field measurements to adjust the coverage area and consequently reducing the time and cost of implementation. Coverage prediction methods use statistical simplifications in conjunction to uncertainty quantification algorithms to assist in modeling multipath effects and impulsive noise, notably hard to be statistically considered. This paper presents a new approach to represent electromagnetic wave propagation uncertainties based on chaotic dynamical systems to model the behavior of multipath effect and impulsive noise. A novel Deterministic Chaotic Propagation Model (DCPM) is presented and used to predict coverage area in a DVB-T2 broadcast system in diverse transmission environments. The results indicate that the predicted area of bad reception is smaller in comparison to the one obtained using traditional methods. Therefore, fewer signal repeaters can be used to provide good TV reception in this area, causing a significant cost reduction in the set-up of a broadcast system. Another parameter used to evaluate the quality of reception is the carrier to noise power ratio (C/N) threshold for a bit error rate (BER) of 10-7. The DCPM indicate a C/N threshold equal to 13.7 dB in dense urban environment and 13.4 dB in rural environment using a moderately less robust modulation configuration. Employing a more robust configuration, the C/N threshold is equal to 0.9 dB in all environments. These numbers match the obtained by the traditional propagation models.
31 December 2019 in International Journal for Innovation Education and Research
This article deals with implementation of a time distribution protocol among limited resources wireless sensor devices. This type of protocol aims to distribute the same time reference among two or more devices within a network. Timestamps on measures help to relate them on causality studies. The PTP protocol defined at IEEE 1588-2008 is used, with little adaptations, to synchronize and tune software clocks inside the target boards of the Texas Instruments ez430-RF2480ZigBee kit. Initially only synchronization was done, but it was verified the need to implement clock tuning. The devices clocks can be synchronized and tuned, even in heavily limited resources devices.
Introdução: Insuficiência cardíaca avançada é causa importante de mortalidade no Brasil. O acesso limitado ao transplante cardíaco e o alto custo dos dispositivos importados reforçam a necessidade de soluções tecnológicas nacionais. Objetivo: O projeto KPump-Mackenzie propõe o desenvolvimento de um dispositivo mecânico de assistência circulatória totalmente implantável, integrado à telemetria 5G, com potencial de aplicação no Sistema Unificado de Saúde do Brasil (SUS). Método: Um rotor protótipo centrífugo, sistema de controle em tempo real e sensores integrados de fluxo e pressão foram desenvolvidos. O dispositivo foi submetido a testes para avaliar desempenho mecânico, estabilidade operacional, integridade estrutural e conectividade via rede 5G. Resultado: Em testes de bancada, o dispositivo mostrou rotação controlada de até 10.000 rpm, fluxo ajustável entre 2 e 6 L/min e latência média inferior a 20 milissegundos na transmissão de dados. A estabilidade operacional contínua foi observada por até 72 h, com funcionamento adequado dos sistemas de monitoramento e segurança. Conclusão: KPump-Mackenzie demonstrou viabilidade técnica e desempenho satisfatório na validação inicial de laboratório. A fase pré-clínica planejada será fundamental para avaliar a segurança e o desempenho biológico, constituindo um passo necessário para futuras aplicações clínicas.
21 July 2017 in LICERE - Revista do Programa de Pós-graduação Interdisciplinar em Estudos do Lazer
O objetivo do estudo foi avaliar a aceleração do movimento e o desempenho de adolescentes com Síndrome de Down e de com desenvolvimento típico durante o arremesso no jogo de boliche do videogame Nintendo® Wii™. Os participantes foram 20 adolescentes, com idade entre 7 e 14 anos, divididos em dois grupos: GSD (Grupo Síndrome de Down) e GC (Grupo Controle). Ambos os grupos fizeram os arremessos necessários para a finalização do jogo com a mão de preferência e um acelerômetro acoplado ao punho. Os dados foram analisados considerando-se apenas os 3 primeiros arremessos. Observou-se que a aceleração máxima média foi maior para o GC em todas as tentativas, porém com o número médio de tentativas equivalente para alcançar o objetivo do jogo. O boliche apresentou-se ao GSD como uma proposta de fácil compreensão, motivadora e com regras simples. Conclui-se que os jogos de arremesso no ambiente virtual podem favorecer o controle de aceleração do movimento.