Earth’s artificially lit area is expanding at 2.2% per year, with existing lit areas brightening by 2.2% per year.

Imaging spectroscopy, also known as hyperspectral remote sensing, is based on the characterization of Earth surface materials and processes through spectrally-resolved measurements of the light interacting with matter. The potential of imaging spectroscopy for Earth remote sensing has been demonstrated since the 1980s. However, most of the developments and applications in imaging spectroscopy have largely relied on airborne spectrometers, as the amount and quality of space-based imaging spectroscopy data remain relatively low to date. The upcoming Environmental Mapping and Analysis Program (EnMAP) German imaging spectroscopy mission is intended to fill this gap. An overview of the main characteristics and current status of the mission is provided in this contribution. The core payload of EnMAP consists of a dual-spectrometer instrument measuring in the optical spectral range between 420 and 2450 nm with a spectral sampling distance varying between 5 and 12 nm and a reference signal-to-noise ratio of 400:1 in the visible and near-infrared and 180:1 in the shortwave-infrared parts of the spectrum. EnMAP images will cover a 30 km-wide area in the across-track direction with a ground sampling distance of 30 m. An across-track tilted observation capability will enable a target revisit time of up to four days at the Equator and better at high latitudes. EnMAP will contribute to the development and exploitation of spaceborne imaging spectroscopy applications by making high-quality data freely available to scientific users worldwide.

The design of future Earth imaging systems, the optimization of fundamental instrument parameters, and the development and evaluation of data pre-processing and scientific-exploitation algorithms require an accurate end-to-end simulation of the entire image generation and processing chain. For this purpose, the end-to-end simulation software EeteS has been developed within the framework of the Environmental Mapping and Analysis Program (EnMAP) mission. This paper presents the EeteS simulation approach and software implementation focusing on calibration and pre-processing. The sequential processing chain of the EnMAP scene simulator consists of four independent parts-the atmospheric, spatial, spectral and radiometric modules. This forward simulator is coupled with a backward simulation branch consisting of calibration modules (non-linearity, dark current and absolute radiometric calibration) and a series of pre-processing modules (radiometric calibration, co-registration, atmospheric correction and orthorectification) forming the complete end-to-end simulation tool. In the result EeteS is capable of simulating EnMAP-like raw image scenes (L0) taking into account a variety of instrumental and environmental configurations. Furthermore, EeteS allows simulations of EnMAP reflectance images carrying out the complete L1 and L2 processing chains. Analysis of the intermediate and final EeteS simulation products has shown the accurate, reliable and consistent performance of the developed modules enabling the system to support technical decision-making processes required for the development of the EnMAP sensor. EeteS has also been used to estimate the SNR characteristics of potential EnMAP products after calibration and pre-processing. Comparing the results to SNR characteristics achieved by the already existing EO-1 Hyperion system has shown a significantly improved SNR which can be expected from future EnMAP data products.

In the upcoming years, many new remote sensing sensors will start operating in space. Sentinel-2 is certainly one of the most outstanding systems that will deliver a flood of detailed and continuous data from the Earth's surface during the next years. However, the heterogeneity of remote sensing data recorded using different sensors demands prelaunch activities to develop the synergies for efficient multisensor data analysis. In this context, accurate sensor simulations are a valuable tool that enables a meaningful intersensor comparison. This paper addresses the simulation of the future Sentinel-2 data and products. The presented Sentinel-2 end-to-end simulation (S2eteS) software models Sentinel-2 data acquisition, sensor calibration, and data preprocessing, which are strongly oriented on the real system. Several tests were performed to prove the software capability to generate accurate Sentinel-2 products, with regard to the quality of the radiance and reflectance products. As an example for a large variety of possible applications, the effects of unknown spectral band shifts, sensor noise, and radiometric accuracy on the accuracy of different Sentinel-2 vegetation indexes (VIs) were investigated. The software also holds the possibility to simulate other similar multispectral sensors because of its generic design.

Temporal variation of natural light sources such as airglow limits the ability of night light sensors to detect changes in small sources of artificial light (such as villages). This study presents a method for correcting for this effect globally, using the satellite radiance detected from regions without artificial light emissions. We developed a routine to define an approximate grid of locations worldwide that do not have regular light emission. We apply this method with a 5 degree equally spaced global grid (total of 2016 individual locations), using data from the Visible Infrared Imaging Radiometer Suite (VIIRS) Day-Night Band (DNB). This code could easily be adapted for other future global sensors. The correction reduces the standard deviation of data in the Earth Observation Group monthly DNB composites by almost a factor of two. The code and datasets presented here are available under an open license by GFZ Data Services, and are implemented in the Radiance Light Trends web application.

An end-to-end sensor simulation is a proper tool for the prediction of the sensor’s performance over a range of conditions that cannot be easily measured. In this study, such a tool has been developed that enables the assessment of the optimum spectral resolution configuration of a sensor based on key applications. It employs the spectral molecular absorption and scattering properties of materials that are used for the identification and determination of the abundances of surface and atmospheric constituents and their interdependence on spatial resolution and signal-to-noise ratio as a basis for the detailed design and consolidation of spectral bands for the future Sentinel-2 sensor. The developed tools allow the computation of synthetic Sentinel-2 spectra that form the frame for the subsequent twofold analysis of bands in the atmospheric absorption and window regions. One part of the study comprises the assessment of optimal spatial and spectral resolution configurations for those bands used for atmospheric correction, optimized with regard to the retrieval of aerosols, water vapor, and the detection of cirrus clouds. The second part of the study presents the optimization of thematic bands, mainly driven by the spectral characteristics of vegetation constituents and minerals. The investigation is performed for different wavelength ranges because most remote sensing applications require the use of specific band combinations rather than single bands. The results from the important “red-edge” and the “short-wave infrared” domains are presented. The recommended optimum spectral design predominantly confirms the sensor parameters given by the European Space Agency. The system is capable of retrieving atmospheric and geobiophysical parameters with enhanced quality compared to existing multispectral sensors. Minor spectral changes of single bands are discussed in the context of typical remote sensing applications, supplemented by the recommendation of a few new bands for the next generation of optical Sentinel sensors.