The negative impact of the displacement currents on the operation of electromagnetic converters results in additional losses and faster insulation degradation, as well as the self-resonance phenomenon. Effective measurement of the dielectric displacement currents in converters is quite complex; thus, advanced simulation programs should be used. However, currently, they do not enable the analysis of the systems in terms of the displacement currents distribution. In order to elaborate an effective tool for analyzing the distribution of the displacement currents by means of the Finite Element Method, we have decided to supplement the well-known reluctance-conductance network model with an additional capacitance model. In the paper, equations for the linked reluctance-conductance-capacitance network model have been presented and discussed in detail. Moreover, we introduce in the algorithm the Harmonic Balance Finite Element Method (HBFEM) and the Fixed-Point Method. This approach enables us to create a field model of electromagnetic converters, which includes the electromagnetic core’s saturation effect. The application of these methods for the reluctance-conductance-capacitance model of the finite element has allowed us to develop a practical tool ensuring complex analysis of the magnetic flux, eddy, and the displacement currents’ distribution in electromagnetic converters with an axial symmetrical structure.

Purpose: The specific modulation methods are used to control different kind of single-phase, as well as three-phase, inverters to ensure flexibility and high quality of the output waveform. This paper aims to present a combination of two classical methods, namely, pulse width modulation method and direct digital synthesis modulation method. Design/methodology/approach: The total harmonic distortion of output waveforms of single-phase inverter based on elaborated modulation method has been determined by means of fast Fourier transform analysis. Tests have been carried out by using standard low-frequency application and also a wireless resonant energy link system. Findings: Applying appropriate timer parameters of microcontroller enables to obtain a waveform for given output parameters (amplitude, frequency, frequency modulation index, etc.). The only limitation is the computing power of a microcontroller. Originality/value: The elaborated method can be successfully used in both low- and high-frequency application ensuring high level of output waveform quality. Additional signal generators and the control of amplitude modulation ratio are no longer indispensable, what simplify immensely a control system.

In recent years, there has been a significant increase in interest in applications of wireless power transmission (WPT). The development of electromobility and consumer electronics creates a need for newer and more effective systems for wireless charging. In spite of the unceasing progress in the research area of wireless energy transmission systems, the significant problem of the motion of the receiver has still not been solved. In this work, an innovative capacitive power transmission (CPT) system with a sliding receiver has been proposed, which enables efficient energy transmission regardless of the location of the receiver system relative to the transmitter system. The analysis of the operating states of the considered system has been conducted with the use of an in-house algorithm, in which the parameters of the equivalent circuit of the CPT system have been implemented. The parameters have been determined by the finite element method (FEM) using the electric scalar potential V. The system of capacitive power transmission was supplied from an E-class inverter. Selected results of calculations of the considered system have been presented and discussed.

The paper presents the new approach for motor driver constructions and control systems. Authors of the work proposed the device that can control both AC and DC electric motors without any additional hardware modification. In order to meet this goal the universal motor driver has been constructed and some improvements in output waveform modulation system have been introduced. In the paper the three different method of a motor control have been discussed briefly and a hardware setup has been presented. Tests have been carried out for three types of electric motors, i.e. a magnetoelectric DC motor, single-phase and three-phase induction motor. The obtained results in form of output waveforms of current and voltage have been analyzed in terms of harmonic distortion using a popular Fast Fourier Transform FFT and discussed in the paper.

Wydawnictwo SIGMA-NOT wydaje czasopisma fachowe informujące swoich czytelników o najnowszych osiągnięciach naukowych i nowoczesnych rozwiązaniach technicznych w Polsce i na świecie, popularyzuje problemy techniczne oraz poszerza wiedzę i kulturę techniczną.