Lukas Gröner

Mr. Lukas Gröner


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2018 in Surface and Coatings Technology
Verified
Journal Article
Closed access
LGLukas Gröner
Lukas Gröner
LKLutz Kirste
Lutz Kirste
SOSabine Oeser
Sabine Oeser
AFAlexander Fromm
Alexander Fromm
MWMarco Wirth
Marco Wirth
CEChris Eberl
Chris Eberl

27 December 2013 in Journal of Applied Physics
Verified
Journal Article
Closed access
PKP. Karzel
P. Karzel
MAM. Ackermann
M. Ackermann
LGLukas Gröner
Lukas Gröner
CRC. Reimann
C. Reimann
MZM. Zschorsch
M. Zschorsch
GHG. Hahn
G. Hahn
This investigation analyzes the dependency of minority charge carrier lifetime values at grain boundaries in multicrystalline silicon on the grain boundary type after P gettering and/or firing of SiNx:H layers deposited by plasma enhanced chemical vapor deposition. To get a broad statistics, a new method to determine the coincidence site lattice grain boundary types on large scale throughout entire 50 × 50 mm2 samples is combined with spatially resolved lifetime-calibrated photoluminescence measurements and mappings of the interstitial iron concentration. As an evaluation of the lifetime data at grain boundaries in comparison to the recombination activity of the bordering grains, lifetime contrast values are calculated. The correlation of this dependency on the grain boundary type with the impurity concentration is analyzed by the investigation of multicrystalline samples from two different ingots grown by directional solidification with different crucible material qualities. A dependency of the efficacy of all applied processes on the grain boundary type is shown based on broad statistics—higher coincidence site lattice indexes correlate with a decrease of median lifetime values after all processes. Hydrogenation of both grains and grain boundaries is found to be more effective in cleaner samples. Extended getter sinks, as a P emitter, are also beneficial to the efficacy of hydrogenation. The lifetime contrast values are dependent on the degree of contamination of the multicrystalline silicon material. In cleaner samples, they rather decrease after the processes; in standard solar-grade material, they increase after POCl3 diffusion and decrease again after subsequent hydrogenation. No correlation with the interstitial iron concentration is found.

21 April 2023 in Advanced Engineering Materials
Verified
Journal Article
Open access
MLManuel Luitz
Manuel Luitz
DPDiana Pellegrini
Diana Pellegrini
MHMiriam von Holst
Miriam von Holst
KSKhaled Seteiz
Khaled Seteiz
LGLukas Gröner
Lukas Gröner
BRBastian E. Rapp
Bastian E. Rapp
Tungsten is an important material for high‐temperature applications due to its high chemical and thermal stability. Its carbide, that is, tungsten carbide, is used in tool manufacturing because of its outstanding hardness and as a catalyst scaffold due to its morphology and large surface area. However, microstructuring, especially high‐resolution 3D microstructuring of both materials, is a complex and challenging process which suffers from slow speeds and requires expensive specialized equipment. Traditional subtractive machining methods, for example, milling, are often not feasible because of the hardness and brittleness of the materials. Commonly, tungsten and tungsten carbide are manufactured by powder metallurgy. However, these methods are very limited in the complexity and resolution of the produced components. Herein, tungsten ion‐containing organic–inorganic photoresins, which are patterned by two‐photon lithography (TPL) at micrometer resolution, are introduced. The printed structures are converted to tungsten or tungsten carbide by thermal debinding and reduction of the precursor or carbothermal reduction reaction, respectively. Using TPL, complex 3D tungsten and tungsten carbide structures are prepared with a resolution down to 2 and 7 μm, respectively. This new pathway of structuring tungsten and its carbide facilitates a broad range of applications from micromachining to metamaterials and catalysis.

1 March 2018 in Thin Solid Films
Verified
Journal Article
Closed access
FMFrank Meyer
Frank Meyer
SOSabine Oeser
Sabine Oeser
AGAndreas Graff
Andreas Graff
EREduard Reisacher
Eduard Reisacher
ECEva-Regine Carl
Eva-Regine Carl
FBFrank Burmeister
Frank Burmeister

1 May 2020 in Materials
Verified
Journal Article
Open access
PDF file
LGLukas Gröner
Lukas Gröner
LMLukas Mengis
Lukas Mengis
MGMathias Galetz
Mathias Galetz
LKLutz Kirste
Lutz Kirste
PDPhilipp Daum
Philipp Daum
FBFrank Burmeister
Frank Burmeister
Aluminum containing Mn+1AXn (MAX) phase materials have attracted increasing attention due to their corrosion resistance, a pronounced self-healing effect and promising diffusion barrier properties for hydrogen. We synthesized Ti2AlN coatings on ferritic steel substrates by physical vapor deposition of alternating Ti- and AlN-layers followed by thermal annealing. The microstructure developed a {0001}-texture with platelet-like shaped grains. To investigate the oxidation behavior, the samples were exposed to a temperature of 700 °C in a muffle furnace. Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) depth profiles revealed the formation of oxide scales, which consisted mainly of dense and stable α-Al2O3. The oxide layer thickness increased with a time dependency of ~t1/4. Electron probe micro analysis (EPMA) scans revealed a diffusion of Al from the coating into the substrate. Steel membranes with as-deposited Ti2AlN and partially oxidized Ti2AlN coatings were used for permeation tests. The permeation of deuterium from the gas phase was measured in an ultra-high vacuum (UHV) permeation cell by mass spectrometry at temperatures of 30–400 °C. We obtained a permeation reduction factor (PRF) of 45 for a pure Ti2AlN coating and a PRF of ~3700 for the oxidized sample. Thus, protective coatings, which prevent hydrogen-induced corrosion, can be achieved by the proper design of Ti2AlN coatings with suitable oxide scale thicknesses.

4 July 2023 in Advanced Engineering Materials
Verified
Journal Article
Closed access
MLManuel Luitz
Manuel Luitz
DPDiana Pellegrini
Diana Pellegrini
MHMiriam von Holst
Miriam von Holst
KSKhaled Seteiz
Khaled Seteiz
LGLukas Gröner
Lukas Gröner
BRBastian E. Rapp
Bastian E. Rapp