In this paper, we report the demonstration of highly sensitive flexible strain sensors formed by a network of metallic nanoparticles (NPs) grown under vacuum on top of a cracked thin alumina film which has been deposited by atomic layer deposition. It is shown that the sensor sensitivity depends on the surface density of NPs as well as on the thickness of alumina thin films that can both be well controlled via the deposition techniques. This method allows reaching a record strain sensitivity value of 2.6 × 10⁸ at 7.2% strain, while exhibiting high sensitivity in a large strain range from 0.1% to 7.2%. The demonstration is followed by a discussion enlightening the physical understanding of sensor operation, which enables the tuning of its performance according to the above process parameters.

A hybrid noble nanoparticle/DNAzyme electrochemical biosensor is proposed for the detection of Pb²⁺, Cd²⁺, and Cr³⁺. The sensor takes advantage of a well-studied material that is known for its selective interaction with heavy metal ions (i.e., DNAzymes), which is combined with metallic nanoparticles. The double-helix structure of DNAzymes is known to dissociate into smaller fragments in the presence of specific heavy metal ions; this results in a measurable change in device resistance due to the collapse of conductive inter-nanoparticle DNAzyme bridging. The paper discusses the effect of DNAzyme anchoring groups (i.e., thiol and amino functionalization groups) on device performance and reports on the successful detection of all three target ions in concentrations that are well below their maximum permitted levels in tap water. While the use of DNAzymes for the detection of lead in particular and, to some extent, cadmium has been studied extensively, this is one of the few reports on the successful detection of chromium (III) via a sensor incorporating DNAzymes. The sensor showed great potential for its future integration in autonomous and remote sensing systems due to its low power characteristics, simple and cost-effective fabrication, and easy automation and measurement.

In this work, the working performance of Platinum (Pt), solvent-free nanoparticle (NP)-based strain sensors made on a flexible substrate has been studied. First, a new model has been developed in order to explain sensor behaviour under strain in a more effective manner than what has been previously reported. The proposed model also highlights the difference between sensors based on solvent-free and solvent-based NPs. As a second step, the ability of atomic layer deposition (ALD) developed Al₂O₃ (alumina) thin films to act as protective coatings against humidity while in adverse conditions (i.e., variations in relative humidity and repeated mechanical stress) has been evaluated. Two different alumina thicknesses (5 and 11 nm) have been tested and their effect on protection against humidity is studied by monitoring sensor resistance. Even in the case of adverse working conditions and for increased mechanical strain (up to 1.2%), it is found that an alumina layer of 11 nm provides sufficient sensor protection, while the proposed model remains valid. This certifies the appropriateness of the proposed strain-sensing technology for demanding applications, such as e-skin and pressure or flow sensing, as well as the possibility of developing a comprehensive computational tool for NP-based devices.

The presence of heavy metal ions in soil, air and water constitutes an important global environmental threat, as these ions accumulate throughout the food chain, contributing to the rise of chronic diseases, including, amongst others, cancer and kidney failure. To date, many efforts have been made for their detection, but there is still a need for the development of sensitive, low-cost, and portable devices able to conduct on-site detection of heavy metal ions. In this work, we combine microfluidic technology and electrochemical sensing in a plastic chip for the selective detection of heavy metal ions utilizing DNAzymes immobilized in between platinum nanoparticles (PtNPs), demonstrating a reliable portable solution for water pollution monitoring. For the realization of the microfluidic-based heavy metal ion detection device, a fast and easy-to-implement fabrication method based on the photolithography of dry photosensitive layers is proposed. As a proof of concept, we demonstrate the detection of Pb²⁺ ions using the prototype microfluidic device.

Due to rapid industrialization, novel water-quality monitoring techniques for the detection of highly toxic and hazardous heavy metal ions are essential. Herein, a hybrid noble nanoparticle/DNAzyme electrochemical biosensor is proposed for the simultaneous and label-free detection of Pb²⁺ and Cr³⁺ in aqueous solutions. The sensor is based on the combination of a two-dimensional naked-platinum nanoparticle film and DNAzymes, whose double-helix configuration disassembles into smaller fragments in the presence of target-specific heavy metal ions. The electrochemical behavior of the fabricated sensor was investigated with non-faradaic electrochemical impedance spectroscopy (EIS), resulting in the successful detection of Pb²⁺ and Cr³⁺ well below their maximum permitted levels in tap water. So far, there has been no report on the successful detection of heavy metal ions utilizing the non-faradaic electrochemical impedance spectroscopy technique based on advanced nanomaterials paired with DNAzymes. This is also one of the few reports on the successful detection of chromium (III) via a sensor incorporating DNAzymes.