Against the background of global warming, permafrost areas are facing increasing thawing, and the threat to the surface of the Qinghai–Tibet Engineering Corridor (QTEC) is serious. It is imperative to understand the current surface deformation and analyze the changes spatiotemporal characteristics for future warnings. At present, observation of a long time series and overall coverage of vertical ground deformation in QTEC are lacking. This paper takes the permafrost deformation of the QTEC as its research object. It uses the pretreated LiCSAR product and combines it with the LiCSBAS package to obtain monitoring results of the long time series deformation of the engineering corridor’s surface. The SAR image acquisition date is taken as the constraint, the results covering the whole processing area are selected, and then the vertical deformation information covering the entire engineering corridor area by ignoring the north–south displacement is calculated. The results show that the surface of the study area, as a whole, slightly subsided between May 2017 and March 2022, and the vertical deformation rate was mostly distributed at −27.068 mm/yr − 18.586 mm/yr, with an average of −1.06 mm/yr. Vertical deformation dominated at 52.84 percent of the study area, of which settlement accounted for 27.57 percent and uplift accounted for 25.27 percent. According to the statistics of the normal distribution of deformation velocity per pixel, a total of 77% of the engineering corridor was stable, with a vertical deformation rate between −6.964 mm/yr and −4.844 mm/yr, and 17.7% of the region was sub-stable, with a settling rate of −12.868 mm/yr − –6.964 mm/yr. The unstable regions included areas with settlement rates greater than 12.868 mm/yr and uplift rates greater than 10.748 mm/yr, representing 4.4 percent and 0.9 percent of the total area, respectively, for a total of 5.3 percent. The results of this paper can be used as the theoretical basis and as basic data for decision making and scientific research in various departments, and they are of great significance for surface stability assessment and early warnings along engineering corridors and traffic projects.

The China–Russia crude oil pipeline (CRCOP) traverses rivers, forests, and mountains over permafrost regions in northeastern China. Water accumulates beside the pipe embankment, which disturbs the hydrothermal balance of permafrost underlying the pipeline. Ground surface flows along the pipeline erode the pipe embankment, which threatens the CRCOP’s operational safety. Additionally, frost heave and thaw settlement can induce differential deformation of the pipes. Therefore, it is necessary to acquire the spatial distribution of water features along the CRCOP, and analyze the various hazard probabilities and their controlling factors. In this paper, information regarding the permafrost type, buried depth of the pipe, soil type, landforms, and vegetation were collected along the CRCOP every 2 km. Ponding and erosive damage caused by surface flows were measured via field investigations and remote sensing images. Two hundred and sixty-four pond sites were extracted from Landsat 8 images, in which the areas of 46.8% of the ponds were larger than 500 m². Several influential factors related to freeze–thaw hazards and erosive damage were selected and put into a logistic regression model to determine their corresponding risk probabilities. The results reflected the distributions, and forecasted the occurrences, of freeze–thaw hazards and erosive damage. The sections of pipe with the highest risks of freeze–thaw and erosive damage accounted for 2.4% and 6.7%, respectively, of the pipeline. Permafrost type and the position where runoff encounters the pipeline were the dominant influences on the freeze–thaw hazards, while the runoff–pipe position, buried depth of the pipe, and landform types played a dominant role in erosive damage along the CRCOP. Combined with the geographic information system (GIS), field surveys, image interpretation and model calculations are effective methods for assessing the various hazards along the CRCOP in permafrost regions.

Diatomite is a siliceous sedimentary rock containing amorphous silica, which can be used as a green mineral admixture to improve the properties of concrete. This study investigates the affecting mechanism of diatomite on concrete performance by macro and micro tests. The results indicate that diatomite can reduce the fluidity of concrete mixture and change its water absorption, compressive strength, resistance to chloride penetration (RCP), porosity, and microstructure. The low fluidity of concrete mixture containing diatomite can reduce workability. With increasing diatomite as partial replacement for cement in concrete, water absorption of concrete decreases before increasing, while compressive strength and RCP rise first and then drop. When diatomite is added to the cement at a content of 5% by weight, the concrete has the lowest water absorption and the highest compressive strength and RCP. Through the mercury intrusion porosimetry (MIP) test, we determined that the addition of 5% diatomite reduces the porosity of concrete from 12.68% to 10.82% and changes the proportion of pores with different sizes in concrete, the proportion of harmless and less harmful pores increases, and the proportion of harmful pores reduces. Based on the microstructure analysis, the SiO₂ in diatomite can react with CH and produce C-S-H. C-S-H is responsible for developing concrete because it fills pores and cracks, forms a platy structure, and makes the concrete much denser, thereby improving its macroscopic performance and microstructure.

In order to research the special embankment (thermosyphon embankment) damages and the distribution of permafrost under the Qinghai–Tibet Highway (QTH) embankment. The section K2952–K2953, which is a typical representative of the QTH, was chosen for the detection and research of the permafrost and embankment damages in order to determine the sources of the damages. In this study, the performance characteristics of the embankment, the active layer, and the permafrost table found in ground-penetrating radar (GPR) images were researched, combined with multi-source. According to the research findings, the construction of the embankment in this section has stabilized the effect on the permafrost table. Under the embankment of the unemployed thermosyphon section, the permafrost distribution has good structural integrity and continuity, with the permafrost table at a depth of around 5 m. The continuity of the permafrost distribution under the embankment in the thermosyphon section was poor, and there was localized degradation, with the permafrost table being approximately 6 m deep. The main cause of the irregular settlement and other damage in this section is the presence of a loose area at the base of the embankment. Although the thermosyphon on both sides of the embankment also plays a role in lifting the permafrost table, it is not ideal for managing the damage to high embankments where the type of permafrost under the embankment is high-temperature permafrost with a high ice content and where the sunny–shady slope effect is obvious. The research results described in this article can therefore provide a crucial foundation for the detection of highway damage and permafrost under embankments in permafrost regions in the future.

The block-stone embankment is a special type of embankment widely used to protect the stability of the underlying warm and ice-rich permafrost. Under the influence of multiple factors, certain damages will still occur in the block-stone embankment after a period of operation, which may weaken or destroy its cooling function, introducing more serious damages to the Qinghai–Tibet Highway (QTH). Ground-penetrating radar (GPR), a nondestructive testing technique, was adopted to investigate the damage properties of the damaged block-stone embankment. GPR imagery, together with the other data and methods (structural characteristics, field survey data, GPR parameters, etc.), indicated four categories of damage: (i) loosening of the upper sand-gravel layer; (ii) loosening of the block-stone layer; (iii) settlement of the block-stone layer; and (iv) dense filling of the block-stones layer. The first two conditions were widely distributed, whereas the settlement and dense filling of the block-stone layer were less so, and the other combined damages also occurred frequently. The close correlation between the different damages indicated a causal relationship. A preliminary discussion of these observations about the influences on the formation of the damage of the block-stone embankment is included. The findings provide some points of reference for the future construction and maintenance of block-stone embankments in permafrost regions.