Tank vehicles are widely used for the road transportation of dangerous goods and especially flammable liquid fuels. Existing gross weight limitations, in such transportations, render the self-weight of the tank structure a crucial parameter of the design. For the design and the construction of metallic tank vehicles carrying dangerous goods, the European Standard EN13094:2015 is applied. This Standard poses a minimum thickness for the shell thickness for the tank construction according to the mechanical properties of the construction material. In the present paper, primarily, the proposed design was investigated and a weight minimization of such a tank vehicle with respect to its structural integrity was performed. As test case, a tank vehicle with a box-shaped cross-section and low gross weight was considered. For the evaluation of the structural integrity of the tank construction, the mechanical analysis software ANSYS ® 2019R1 was used. The boundary values and the suitable computation for structural integrity were applied, as they are defined in the corresponding Standards. The thickness of the construction material was decreased to a minimum, lower than that posed by the standards, indicating that the limit posed by them was by no means boundary in terms of structural integrity.
The ride comfort provided by a vehicle to the driver and the passengers is an important feature, directly correlated to the technical characteristics of the suspension system of the vehicle. In the literature, several lumped-parameter models simulating the vehicle and the driver are proposed for the computational evaluation of ride comfort. In order to quantify ride comfort, other than the values of acceleration, metrics such as seat effective amplitude transmissibility (SEAT) and seat-to-head transmissibility (STHT) are utilized. In this paper, a quarter car model is coupled with a six-degree-of-freedom lumped-parameter model, consisting of the driver’s seat and the driver. A sensitivity analysis is performed on the values of the lumped parameters of the seated human body with regard to ride comfort in order to evaluate the effect of their accuracy relative to the ride comfort evaluation. The results of the sensitivity analysis revealed that the values of the mass, the stiffness and the damping parameters of the seated human model influence the ride-comfort metrics to a different extent. Furthermore, it was depicted that ride-comfort metrics were affected in different manners depending on the characteristics of the excitation of the vehicle, yet less than 10% Finally, the importance of the consideration of single-disturbance excitations in such sensitivity studies emerged.